2. Hobart
  3. DDU38e

Hobart DDU38e Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Hobart DDU38e Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
F-39520 – DDU38e Direct Drive Unloader for CLe Dishwashers Page 1 of 2
DDU38e DIRECT DRIVE UNLOADER
FOR CLe DISHWASHERS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ DESIGN: An accessory for any Hobart CLe
Dishwasher. It is set up to be easily installed in
the eld. The DDU38e adds 38" to the length of
the machine.
■ CONSTRUCTION: Back, bottom and end
shields of formed 14 gauge stainless steel with
coved corners. Attached to the clean side of the
dishwasher by stainless steel bolts. Unit has a
1
1
⁄2" drain connection and perforated stainless
steel drain cover.
■ CONVEYOR: Center pawl to be connected to
dishwasher conveyor by means of a stainless
steel adjustable rod. As conveyor drives, center
pawl drives racks around 90 degree corner. The
DDU38e is designed to move the racks at the
same speed as the conveyor dishwasher speed.
MODEL
❑ DDU38e – Direct Drive Unloader
Specications, Details and Dimensions on Inside and Back.
DDU38e DIRECT DRIVE UNLOADER FOR CLe DISHWASHERS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 2 of 2 F-39520 – DDU38e Direct Drive Unloader for CLe Dishwashers
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
DDU38e DIRECT DRIVE UNLOADER
FOR CLe DISHWASHERS
DETAILS AND DIMENSIONS
F-39520 (REV. 10/08) LITHO IN U.S.A. (H-01)
RIGHT TO LEFT
LEFT TO RIGHT
/