Uso e manutenzione
Emploi et entretien
Gebrauch und Instandhaltung
Use and maintenance
Uso y manutención
Uso e manutenção
10
CLASSE 10 USB / S / RE
USB / S / RE
www.rancilio.com
Cod. 46900146 REV. -- 03/2008
ITALY
Rancilio Macchine per caffè S.p.A.
Viale della Repubblica 40
20010 Villastanza di Parabiago
Milano Italy
Tel +39 0331 408200
Fax +39 0331 551437
www.rancilio.it
SPAIN
Rancilio Espana, s.a.
Gran Vía de Carlos III, 84 3ª
Edicio Trade
08028 Barcelona Spain
Tel. +34 902 884 275
Tel. +34 934 923 414
Fax +34 93 496 57 01
www.rancilio.com
USA
Rancilio North America Inc.
8102 S.Lemont Rd. #1200
Woodridge, IL 60517 USA
Tel +1 630 427 1703
Fax +1 630 427 1713
www.rancilio.com
ASIA
Asian Market Access HK Ltd
601 Tak Woo House
17-19 D’aguilar Street Central
Hong Kong
Tel +852 2521 7839
Fax +852 2521 5787
www.rancilio.com
IT
Gentile cliente,
grazie per averci accordato la Sua ducia.
Siamo sicuri che il prodotto che Lei ha acquistato risponderà in pieno alle Sue
aspettative, come tutti gli altri articoli della produzione RANCILIO. Il prodotto che Lei si
accinge ad usare è il risultato di approfonditi studi e meticolose sperimentazioni fatte
dalla RANCILIO per offrirLe quanto di più funzionale, sicuro ed apprezzabile, anche sotto
il prolo del design, si possa trovare sul mercato. Il libretto di istruzioni per il corretto
uso e manutenzione della macchina La aiuterà a sfruttare al meglio le sue elevatissime
possibilità e prestazioni.
Con l’augurio di poterLa sempre annoverare tra i nostri clienti, Le auguriamo una buona
lettura.
FR
Cher Client,
Nous Vous remercions pour Votre conance.
Nous sommes certains que le produit que Vous avez acheté correspondra entièrement
à Vos désirs, comme du reste tous les articles de la production RANCILIO. Le produit
que Vous allez employer est le résultat d’études approfondies et de méticuleux essais
effectués par RANCILIO an de pouvoir Vous offrir le produit le plus fonctionnel, le plus
sûr et le plus remarquable, également du point de vue design, que l’on puisse trouver
sur le marché. Le petit livre d’instructions pour l’emploi correct et l’entretien de la
machine Vous aidera à tirer le maximum de ses grandes possibilités et performances.
Nous sommes certains que nos explications sont claires et espérons, cher client, mériter
Votre délité.
DE
Sehr geehrte Kundin/sehr geehrter Kunde,
Zuerst möchten wir Innen für das uns entgegengebrachte Vertrauen danken.
Wir hoffen, dass das von Ihnen gekaufte Produkt Ihren Erwartungen in jeder Hinsicht
entsprechen wird-wie übrigens auch all unsere anderen Erzeugnisse. Das Produkt
das Sie in Gebrauch nehmen werden, ist das Resultat von sorgfältigen von RANCILIO
Untersuchungen und Tests, um Ihnen in Bezug auf Funktionalität, Sicherheit,
Leitungsfähigkeit sowie Design ein Produkt anbieten zu können, das das Beste auf
Markt bendliche ist. Das Büchlein mit den Anwiesungen für eine korrekte Bedienung
und Wartung der Maschine wird Ihnen behilich sein, das Beste aus Ihnem Gerät zu
machen. Wir hoffen, dass unsere Erklärungen verständlich sind und dass Sie auch in
Zukunft zu unseren Kunden zählen dürfen.
Mit freundlichen Grüssen.
GB
Dear Customer,
First of all, thank you for choosing RANCILIO.
We are condent that the product you have purchased will meet all your expectations
just as all our other products are designed to do. The product that you are about to use
is the outcome of painstaking research and tests.
Rancilio guarantees the equipment we have supplied to you, is the most functional,
safe and satisfactory of its kind to be found on the market, in regards to both its design
and its efciency.
This booklet of instructions, which outlines the correct use and maintenance will
help you to get the best possible service out of your machine. We trust you will nd
our explanations clear and we may continue, in the future, to count you among our
esteemed customers.
ES
Muy estimado cliente:
muchas gracias por habernos acordado Su conanza.
Estamos seguros que el producto que Ud. ha adquirido responderà seguramente a Sus
esperanzas, asi como és por todos los demás articulos RANCILIO fabrica. El producto que
Ud. se apresta a utilzar és el resultado de particulares estudios y pruebas meticulosas
hechas por la rma RANCILIO para ofrecerle un producto funcional, seguro y apreciable,
tambien por lo que se reere al design, seguramente
uno de los mejores que Ud. pueda encontrar en comercio. El manual de instrucciones para
utilizar correctamente y efectuar la manutención de la máquina, la ayudará a disfrutar
a lo máximo las elevadas posibilidades y prestaciones de la misma. Mientras conamos
que Ud. siga siendo siempre Cliente nuetro, le deseamo una provechosa lectura.
PT
Prezado Cliente,
Obrigado por nos ter dado a sua conança.
Temos certeza que o produto que Você comprou responderá totalmente as suas
expectativas, como todos os outros artigos da produção RANCILIO. O produto que Você
está para usar é o resultado de estudos profundos e experiências meticulosas feitas pela
RANCILIO, para oferece-lhe quanto de mais funcional, seguro e considerável, também
sob o perl do disign, que se possa encontrar no mercado. O manual de instruções para
o uso correto e manutenção da máquina lhe ajudará a desfrutar ao máximo as suas
elevadíssimas possibilidades e desempenhos.
Com o desejo de poder tê-lo sempre entre os nossos clientes, desejamo-lhe uma boa
leitura.
Tratamento do lixo dos aparelhos elétricos e eletrônicos
Jogar o produtos seguindo as normas em vigor relativas à coleta diferencia-
da em centros de coleta apropriados.
Não tratar como simples lixo urbano.
Para qualquer informação necesssária contatar o construtor no endereço indicado
no manual de instruções.
O produto responde aos requisitos exigidos pelas novas diretrizes introdu-
zidas para tutelar o ambiente e deve ser sucadato em modo apropriado ao
nal do seu ciclo de vida.
Afvalbehandeling van de elektrische en elektronische apparatuur
Verwerk het product volgens de geldende normen m.b.t. de gescheiden
afval bij de voorbestemde vuilniscentrums.
Behandel het product niet als eenvoudig stadsvuil.
Neem contact op met de constructeur op het aangegeven adres in deze handleiding
voor nadere informaties.
Het product beantwoordt aan de door de nieuwe richtlijnen verlangde verei-
sten ingevoerd ter bescherming van het milieu en moet op passende wijze op
het einde van zijn levenscyclus worden verwerkt.
Produkt musi zostać poddany utylizacji zgodnie z obowiązującymi przepi-
sami dotyczącymi segregowania odpadów w specjalnie do tego wyznaczonych miej-
scach. Nie wyrzucać razem ze zwykłymi odpadami miejskimi.
W celu uzyskania jakichkolwiek informacji proszę skontaktować się z producentem
pod adresem podanym w instrukcji obsługi dla użytkownika.
Ten produkt odpowiada wymogom zawartym w nowych dyrektywach
wprowadzonych w celu ochrony środowiska i po zakończeniu cyklu eksploa-
tacji musi zostać zutylizowany we właściwy sposób.
Odlaganje izdelkov je potrebno vršiti v skladu z veljavnimi predpisi v zvezi z
selektivnim odlaganjem odpadkov v centrih za zbiranje odpadkov ki so temu
namenjeni. Ne odlagajte ga kot običajne smeti.
Za kakršnokoli informacijo kontaktirajte proizvajalca na naslovu, ki je naveden v
priročniku z navodili.
Izdelek odgovarja zahtevam novih smernic, ki so uvedene zaradi zaščite
življenske sredine in mora biti odložen na ustrezen način po koncu življenjske
dobe.
Iekārtu atkritumus nepieciešams utilizēt atbilstoši spēkā esošajiem noteikumiem,
kuri reglamentē dažādu veidu atkritumu utilizēšanu tikai speciālajās atkritumu
konteineros. Nemetiet šos atkritumus parastajos kopējos pilsētas atkritumu.
Lai saņemtu jebkuru informāciju, griezieties pie ražotāja, kura adrese uzrādīta
ekspluatācijas instrukcijā.
Dotais produkts atbilst jaunās direktīvas prasībām, kura attiecās uz
ekoloğisko drošību, un tas ir atbilstošā kārtībā utilizējams pēc tā, kad nobei-
gsies tā derīguma termiņš.
Výrobek likvidujte podle současných předpisů o likvidaci tříděného odpadu
na k tomu určených skládkách.
Nezacházejte s ním jako s běžným obecním odpadem.
Potřebujete-li jakékoli informace, kontaktujte prosím výrobce na adrese uvedené v
návodu pro použití.
Výrobek odpovídá požadavkům nových směrnic zavedených pro ochranu
životního prostředí a zlikvidovat se na konci své životnosti musí příslušným
způsobem.
Výrobok likvidujte podľa súčasných predpisov o likvidácii triedeného odpa-
du na k tomu určených skládkach.
Nezaobchádzajte s ním ako s bežným komunálnym odpadom.
Ak potrebujete akékoľvek informácie, kontaktujte, prosím, výrobcu na adrese uve-
denej v návode na použitie.
Výrobok zodpovedá požiadavkám nových smerníc zavedených pre ochra-
nu životného prostredia a zlikvidovať sa na konci svojej životnosti musí
príslušným spôsobom.
Šalinkite įrangos atliekas atitinkamai esamų taisyklių, kurios liečia tokios
rūšies atliekas apie specialias atliekų kaupimo vietas.
Nemeskite atliekas į paprastus miesto šiukšlių konteinerius. Papildomos informa-
cijos kreipkitės į gamintoją nurodytu vartotojo instrukcijoje adresu .
Šis produktas atitinka įvestos ekologiniam saugumui naujos direktyvos
reikalavimams ir turi būti sunaikintas pasibaigus jo atitikties terminui.
Entsorgung von elektrischen und elektronischen Geräten
Das ist Produkt gemäß den geltenden Normen für die Mülltrennung bei den
zuständigen Sammelzentren zu entsorgen.
Nicht wie normalen Müll behandeln.
Weitere Informationen sind beim Hersteller unter der in der Gebrauchsanleitung an-
gegebenen Adresse zu erhalten.
Das Produkt entspricht den Erfordernissen den neuen Richtlinien über den
Umweltschutz, und muss an seinem Lebensende entsprechend entsorgt wer-
den.
Dispose of the product in accordance with current regulations concerning diffe-
rentiated waste disposal in dedicated waste disposal areas.
Do not treat as simple urban waste.
For any information please contact the manufacturer at the address specied in the user
manual.
The product complies with the requirements of the new directives introduced for
the environmental safeguard and must be disposed of appropriately at the end
of its life cycle.
Smaltire il prodotto seguendo le norme vigenti relative allo smaltimento
differenziato presso centri di raccolta dedicati.
Non trattare come semplice riuto urbano.
Per qualsiasi informazione necessaria contattare il costruttore all’indirizzo indicato
nel libretto istruzioni.
Il prodotto risponde ai requisiti richiesti dalle nuove direttive introdotte a tutela
dell’ambiente e che deve essere smaltito in modo appropriato al termine del
suo ciclo di vita.
Ecouler le produit conformément aux normes en vigueur concernant l’écou-
lement différencié auprès de centres de récolte dédiés.
Ne pas traiter comme simples ordures urbaines. Pour toute information nécessaire
contacter le constructeur à l’adresse indiquée dans le manuel d’emploi.
Le produit est conforme aux caractéristiques requises par les nouvelles direc-
tives introduites pour la sauvegarde de l’environnement et doit être écoulé de
façon appropriée à la n de son cycle de vie.
Eliminar el producto en los centros de recolección especializados, siguiendo
las normas vigentes relativas a la eliminación diferenciada.
No tratar como simple desecho urbano.
Para cualquier información necesaria, contacten al fabricante en la dirección indica-
da en el manual de instrucciones.
El producto responde a los requisitos demandados en las nuevas directivas
introducidas para la protección del ambiente y debe ser eliminado de manera
apropiada al nal de su ciclo de vida.
Bortskaf produktet i overensstemmelse med nuværende reguleringer vedr.
forskellige affaldsprodukter på deponeringssteder dedikeret til affald.
Må ikke behandles som alm. byaffald.
Kontakt producenten på den specicerede adresse i brugerhåndbogen for yderligere
oplysninger.
Produktet er i overensstemmelse med de nye direktiver, introduceret for mi-
ljøforanstaltningen og skal bortskaffes på behørig vis ved slutningen af dets
livscyklus.
Avfallshantering av elektriska och elektroniska apparate
Nedskrota produkten genom att följa gällande normer för differentierad sa-
nering på seriösa uppsamlingsställen.
Behandla det inte som vanligt tätortsavfall.
Vid behov av ytterligare information, var vänlig ta kontakt med tillverkaren på den
adress som anges i bruksanvisningen.
Produkten motsvarar de krav som ställs i de nya miljödirektiven och den
måste nedskrotas på ett lämpligt sätt i slutet av sin livscykel.
Produktet skal avhendes i samsvar med gjeldende forskrifter angående dif-
ferensiert avfallsavhending på dediserte avfallsavhendingsområder.
Det må ikke behandles som vanlig byavfall.
For videre opplysninger vennligst kontakt fabrikanten på adressen som er angitt i
bruksanvisningen.
Produktet etterkommer kravene i de nye miljødirektivene og skal avhendes
på en passende måte etter avsluttet bruk.
Elektri- ja elektronseadmete jäätmete töötlemine
Tootest lahtisaamist peab läbi viima vastavalt käibivatele eeskirjadele, mis
käsitlevad jäätmetest eristatud lahtisaamist selleks mõeldud jäätmetest
lahtisaamise alades.
Mitte töödelda nagu tavalisi majapidamisjäätmeid.
Mistahes informatsiooni saamiseks pöörduge palun tootja poole aadressil, mis on
märgitud kasutaja käsiraamatus.
Toode vastab uuetele nõutele, mis on esitletud keskkonna kaitsmiseks ja sel-
lest peab reeglipäraselt lahti saama selle elutsükli lõpus.
Hävitä tuote noudattaen seuraavia voimassa olevia lajitellun jätteiden käsit-
telyä koskevia määräyksiä asianmukaiseen jätteidenkäsittelylaitokseen.
Älä käsittele sitä tavallisena kaupunkijätteenä.
Mitä tahansa tietoja varten ota yhteyttä valmistajaan ohjekirjassa olevaan osoittee-
seen.
Tuote on uusien ympäristöä suojaavien direktiivien vaatimusten mukainen ja
se tulee hävittää asianmukaisella tavalla sen käyttöiän päätyttyä.
A terméket az erre a célra kijelölt gyűjtőhelyekre adja le követve a szelektív
hulladékgyűjtéssel kapcsolatos jelenlegi jogszabályokat.
Ne kezelje közönséges városi hulladékként.
Bárminemű információért forduljon a gyártóhoz, melynek címét a használati útmu-
tatóban találja.
A termék megfelel a környezet védelme érdekében újonnan bevezetett
irányelvek követelményeinek és ennek megfelelően kell kezelni az élettar-
tamának végeztével.
Il presidente - The president
20010 Villastanza di Parabiago (MI)
Viale della Repubblica 40
DICHIARAZIONE DI CONFORMITA’ CE - DECLARATION DE CONFORMITE CE
EG-KONFORMITÄTSERKLÄRUNG - EC DECLARATION OF CONFORMITY
DECLARACIÓN DE CONFORMIDAD CE - DECLARAÇÃO DE CONFORMIDADE CE
Noi RANCILIO Macchine per caffè S.p.A.
Dichiariamo sotto la nostra responsabilità che il prodotto: Macchina per caffè per uso professionale
Déclarons, sous notre responsabilité, que le produit : Machine à café d’utilisation professionnel
Wir erklären auf unsere Verantwortung, daß das Produkt:
Declare under our responsibility that the product: Espresso coffee makers for commercial use
Declaramos bajo nuestra responsabilidad que el producto:
Declaramos sob a nossa responsabilidade que o produto:
La presente dichiarazione perde la sua validità se la macchina viene modicata senza la nostra espressa autorizzazione.
La présente déclaration perd sa validité dès lors que la machine est modiée sans notre expresse autorisation.
Die vorliegende Erklärung verliert ihre Gültigkeit, wenn die Maschine ohne unsere ausdrückliche Genehmigung verändert wird.
The present declaration will become invalid should the machine be modied without our specic authorization.
La presente declaración pierde su validez si la máquina es modicada sin nuestra expresa autorización.
A presente declaração perde a validade se a máquina é modicada sem a nossa expressa autorização.
al quale è riferita questa Dichiarazione, secondo quanto prescritto dalle direttive speciche:
à laquelle se réfère cette déclaration, selon les prescriptions des directives spéciques.
auf das sich diese Erklärung bezieht, Entsprechend der Vorschriften der spezischen Richtlinien.
to which this declaration relates is, according to the provisions of the specic directives:
al cual se reere esta Declaración, de acuerdo con lo prescrito por las especícas directivas:
ao qual se refere esta Declaração, segundo quanto prescrito pelas especícas diretrizes:
98/37/CE
Direttiva macchina - Direttiva machine - Richtlinie Maschine - Makers directive - Directiva máquina - Diretriz da máquina:
73/23/CEE, 93/68/CEE
Direttiva Bassa Tensione - Direttiva Basse Tension - Niederspannungsrichtline - Low Voltage Directive - Directiva Baja Tensiòn - Diretriz Baixa Tensão:
89/336/CEE, 93/68/CEE, 92/31/CEE
Direttiva EMC - Direttiva EMC - Richtlinie EMC - EMC Directive - Directiva EMC - Diretriz EMC
97/23/CE
Direttiva attrezzatura a pressione (PED)-Directive sur les appareillages sous pression (PED)-Richtlinie für unter Druck stehende Geräte (PED) Pressure
device directive (PED) - Directiva equipos de presión (PED) - Diretriz aparelhagem de pressão (PED)
è conforme alle seguenti norme: - conforme aux normes suivantes :
In Übereinstimmung mit den folgenden Normen: - it complies with the following norms:
es conforme a las siguientes normas: - É conforme as seguintes normas:
EN 60335-1, EN 60335-2-75, EN 55014-1, EN 55014-2, EN 61000-3, EN 61000-4, EN 50366
Norme EN armonizzate - Normes EN harmonisées - Harmonisierte EN-Norme - Harmonized EN norms - Normas EN armonizadas - Normes EN Harmonia
MD-CER.01 rev.0.0 del 16/05/05
7
Descrizione attrezzatura a pressione-Description de l’appareillage sous pression-Beschreibung der unter Druck stehenden Geräte-
Pressure device description-Descripción de los equipos de presión - Descrição dos equipamentos de pressão
Pressione - Pression
Druck - Pressure
Presión - Pressão
Temperatura - Température
Temperatur - Temperature
Temperatura - Temperatura
Fluido - Fluide
Flüssig - Fluid
Fluido - Fluído
Capacità lt-Capacité lt-Fähigkeit lt-
Capacity lt-Potencia lt- Potência it
Caldaia - Chaudière
Kessel - Boiler
Caldera - Caldeira
0,18/1,8 Mpa/bar
131,2 C°
Acqua/Vapore - Eau/Vapeur
Wasser/Dampf - Water/Steam
Agua/Vapor - Água/Vapor
2 gr. 3 gr. 4 gr.
11 16 22
Pressione - Pression
Druck - Pressure
Presión - Pressão
Temperatura - Température
Temperatur - Temperature
Temperatura - Temperatura
Fluido - Fluide
Flüssig - Fluid
Fluido - Fluído
Capacità-Capacité
Fähigkeit -Capacity
Potencia-Potência
Numero scambiatore -Numéro de l’échangeur
Nummer des Austauschers-
Exehanger number-Número intercambiador
Número Intercambiador
Scambiatore -Echangeur
Austauscher -Exchanger
Intercambiador
Intercambiador
1.2/12 Mpa/bar 131,2 C°
Acqua - Eau
Wasser- Water
Agua - Água
0.35 l
2 gr. 3 gr. 4 gr.
2 3 4
1
2
5
7
10
13
3
6
8
11
12
4
9
A
8
3 18
3
6
MOD. S
3 6 15
MOD.
USB
MOD. RE
21
4
8
17
14
1
2
5
19
20
9
20
16
13
10
9
7
A
B
D
C
H
4
3
L
ovat
o
L
2 (3/8"G)
1 (Ø 30 mm)
10
A
B
C
D
E
7.1
7.2
7.3
7.4
7.5
3
6.1
6.2
6.3
6.1
6.2
6.3
4
5
1
2
12
10
11
7.6
7.7
9
VERS.
ISTEAM
8
14
3 (S)
4
(RE)
5 (USB)
6
(RE)
7 (USB)
11
1
69
EN ENGLISH
CONTENTS
Machine identication data ............................. 70
70
71
2.1. Specications and composition ................ 71
2.2. Machine equipment .................................. 71
2.3. Mechanical protective devices ................. 72
2.4. Electric safety devices ............................. 72
2.5. Aerial noise ..............................................72
2.6. Vibrations ................................................. 72
72
3.1. Dimensions and weights .......................... 72
72
4.1. Precautionary measures .......................... 73
73
5.1. Packaging ................................................ 73
5.2. Inspection on receipt ................................ 73
73
6.1.Connections to be made by the user ........ 73
6.1.1. Water and gas supply ........................... 73
6.1.2. Electric supply ....................................... 74
6.2. Preliminary operations ............................. 74
6.3. Connections ............................................. 74
75
7.1. Controls .................................................... 75
7.2. Control instruments .................................. 76
7.3. Starting up ................................................ 76
77
8.1. Preparing coffee ....................................... 77
8.2. Preparing cappuccino .............................. 77
8.3. Warming a beverage ................................ 78
8.4. Preparing tea, camomile, etc................ ... 78
8.5. Machines with iSteam automatic system .. 78
8.5.1. Heating Milk or a Drink (iSteam) ........... 78
8.5.2. Preparing Frothed Milk (iSteam) ........... 78
9.1. For models USB ....................................... 78
9.1.1. Adjusting the dose ................................. 78
9.2. Programming (Mod.USB) ......................... 79
9.2.1. Selecting the display language ............. 79
9.2.2. Softener regeneration ........................... 80
9.2.3. Buzzer .................................................. 80
9.2.4. Clock ..................................................... 80
9.2.5. Set Timer ............................................... 81
9.2.6. Selection counts .................................... 81
9.2.7. Procedure for replacing the water inside
the boiler with fresh water. .................... 82
9.3. Displaying ................................................ 82
9.3.1. Warming up phase ................................ 82
9.3.2. Operating mode .................................... 82
9.4. Operating safety devices ......................... 83
9.5. The cup-warmer ....................................... 83
9.6. List of malfunctions .................................. 83
9.7. List of warning ......................................... 83
10.1. Daily ....................................................... 85
10.2. Weekly ................................................... 85
10.2.1. Washing of the coffee groups ............. 85
10.2.2. Cleaning iSteam ................................86
10.3. Periodical ............................................... 86
10.3.1.Renewal of water in the boiler .............. 86
13.1.1 Safety thermostat – Manual resetting .. 86
version
The operations marked with this symbol
are to be undertaken exclusively by an
installation technician
The operations marked with this symbol are
to be undertaken by the user.
IT ITALIANO 12-30
FR FRANCAIS 31-49
DE DEUTSCH 50-68
ES ESPAÑOL 88-106
PT PORTUGUêS 107-125
SCHEMI ELETTRICI
SCHEMAS ELECTRIQUES
SCHALTPLANE
ESQUEMAS ELECTRICOS
ESQUEMAS ELÉTRICOS
SCHEMI IDRAULICI
SCHÉMAS HyDRAULIQUES
HyDRAULIKPLÄNE
HYDRAULIC DIAGRAMS 132-134
ESQUEMAS HIDRÁULICOS
ESQUEMAS HIDRÁULICOS
70
NAME: Coffee machine, CLASSE 10 series
MODEL: USB - S - RE
VERSIONS: 2 - 3 - 4 GROUPS
The label illustrated on the EC Declaration of Conformity of this instruction manual corresponds to the identi-
cation label placed on the machine Fig. 2. (Pos. A).
Label identication (Fig.1):
1 Manufacturer
2 Model and version
3 Voltage
4 EC conformity mark (if required)
5 Serial number
6 Boiler data
7 Machine total absorption
8 Protection level
9 Motor power
10 Heating element power
11 Frequency
12 Conformity marks
13 year of manufacture
Warning signal. The instructions which refer to this signal must be followed with great care in order to
avoid accidents or damage to the machine.
This manual is an integral and essential part of the product and must be delivered to the user. The warnings
contained in it must be read carefully, as they supply important indications relating to the safety of installation,
use and maintenance. Keep this manual for future reference.
● Don’t leave the packing elements (plastic bags,
expanded polystyrene, nails, cardboard, etc.)
within the reach of children, as these elements
are potential sources or danger.
● Check that the data on the machine corresponds
to that of the electrical supply network, before
connecting the equipment.
● Adaptors, multiple sockets and /or extensions must
not be used.
● In doubt, request an accurate control of the plant
by qualied personnel. The electric plant must be
provided with the following safety devices:
- efcient earth connection;
- section of conductors suitable for absorption
capacity
- efficient earth leakage protection circuit
breaker.
● Install the machine on a water repellent surface
(laminate, steel, ceramic, etc.) away from heat
sources (oven, cooking stove, replace, etc.) and
in conditions in which the temperature may not go
below 5°C. KEEP WARM.
● Do not leave the machine exposed to atmosphe-
ric agents or place them in damp rooms such as
bathrooms.
● Do not obstruct the suction or dispersion grilles
and do not cover with cloths, etc.
● Keep the packed machine in a dry place, not
exposed to atmospheric agents and in conditions
in which the temperature does not go below 5°C.
Do not stack more than three items of the same kind.
Do not place heavy items on the packaging.
● In an emergency, such as the breaking out of a re,
unusual noise, overheating, etc., take immediate
action, disconnecting the power and closing gas
and water taps.
● Only use original spare parts in order to avoid
compromising the safety and proper functioning
of the machine.
Erroneous installation can cause damage
to people, animals and things for which the
manufacturer cannot be considered respon-
sible
71
Legend:
A Semiautomatic system; manual dispensing start
and stop.
B Automatic system; electronic control of coffee
and hot water doses dispensed.
C N. of coffee dispensing units.
D N. of steam spouts.
E N. of hot water spouts.
F Operating with economizer.
Gas heating, on request.
1 Steam tap (C-LEVER)
2 Steam spout
3 Function/service button panel
4 Hot water spout thermoregular
5 Coffee dispensing unit
6 Coffee dispensing button panel (mod.S - USB)
7 Manual water supply tap
8 Level indicator
9 Gauge
10 Power on-off switch and led
11 Gas lighter (on specic models)
12 Valved gas tap (on specic models)
13 Switch and boiler resistance engagement light.
14 Bottom unit door for access to controls
15 Display (mod.UDB)
16 Programming panel (mod. USB)
17 Hot water spout
18 Dispenser control lever (mod.RE)
19 Unit door opening lever
20 USB connection
21 iSteam dispenser nozzle
(Fig.3 - 4)
The machines in the CLASSE 10 series have been
designed to prepare express coffee and hot beve-
rages.
A positive-displacement pump inside the machine
powers the heater in which the water is heated. By
pressing the appropriate buttons, water is supplied
to the spouts in the form of hot water or steam, ac-
cording to needs.
The hot water used to make drinks comes from the
boiler and is mixed directly with cold water from the
water outlet.
The machine is composed of a steel carrying struc-
ture on which the mechanical and electrical compo-
nents are tted. These are completely covered with
panels made of aluminium.
The beverages are dispensed at the front of the
machine, where all the buttons, control devices and
dispensers are to be found.
There is a cup-warming plate on the top of the ma-
chine.
Models equipped with gas connections (when applied).
A B C D E F
USB
- ok 2 - 3 - 4 2 2 ok
S
ok - 2 - 3 - 4 2 2 ok
RE
ok - 2 - 3 - 4 2 2 ok
2 GROUP 3 GROUP 4 GROUP
1 1 1
2 3 4
Filters 3 4 5
1 1 1
1 1 1
1 1 1
Pipe connections 1 1 1
Blind disks for cleaning 2 3 4
Doser and presser 1 1 1
Instruction manual 1 1 1
Brush 1 1 1
72
The machine is equipped with the following protective
devices:
● complete panelling protection of all the parts
subject to heat and of the steam and hot water
supplier;
● cup-warmer plate supplied with a tray to collect
spilt liquids;
● work surface provided with grill and tray to collect
spilt liquids;
● expansion valve in the hydraulic system and valve
on the boiler to avoid overpressure;
● nonreturn valve on the hydraulic system to avoid
owing back to the main supply.
The safety devices provided are:
● 12V low tension push buttons an the USB control
key panel;
● thermal protection on the pump motor;
● gas failure thermocouple and thermocouple ther-
mostat automatically closing gas tap;
● safe resistance thermal;
● Electronic safety devices.
Noise level in the working place does not usually
exceed 70dB(A).
The machine is supplied with rubber vibration dam-
ping feet. In normal working conditions, the machine
does not produce vibrations harmful to the operator
and the environment.
(Fig.5)
You’ll nd all the technical data on electric
connection, on the machine identication
label Fig. 1.
Machines provided with gas heating have a standard
connection kit to carry out the following connections
with:
- direct stiff pipe;
- copper and double cone pipe;
- rubber support.
Gas connections must be made in complian-
ce with the safety regulations in force in the
relative country.
The machine have been designed, manufactured and
protected to be used to make express coffee and hot
beverages (tea, cappuccino, etc.). Any other use is to
be considered unsuitable and therefore dangerous.
The manufacturer cannot be held responsible for
any damage caused to people or things
due to unsuitable, erroneous or irrational
use of the machine.
The operator must always follow the indications
contained in this manual. In the case of a failure or if
the machine is not working properly, switch it off and
do not attempt any direct repair. Refer exclusively
to a service centre.
2 GROUP 3 GROUP 4 GROUP
A mm 780 1020 1260
B mm 700 940 1180
C mm 540 540 540
D mm 470 470 470
H mm 530 530 530
11 16 22
76 94 112
3/8” 3/8” 3/8”
Ømm drainage 14 14 14
Packaging
3
0,44 0,55 0,67
Dimensions L x P x H mm 910x670x720 1150x670x720 1390x670x720
91 111 134
73
The appliance is only to be installed in
locations where use and maintenance is
restricted to trained personnel.
The machines are tted with height adjustable feet.
The support surface shall be levelled, dry, smooth,
steady and stable and at such a height that the cup-
warming surface is at over 150 cm from ground. Do not
use water jets or install where water jets are used.
In order to guarantee normal operation, the machine
must be installed in areas that the environmental
temperature is between +5°C ÷ +32°C end humidity
of not over 70%.
It does not need to be anchored to the surface and it
does not require any technical operations to dampen
vibrations in order to operate properly.
It is recommended to leave the area around the ma-
chine free to facilitate its use and the performance
of any maintenance operations.
If the machine is wet or very damp, wait until it is
completely dry before installing or using it. It is always
necessary to request an accurate control to qualied
service people in order to nd any possible damage
to the electric components.
Reserve an area near the machine for the installa-
tion of the coffee grinding and dosage machine (see
relevant documentation).
The machine is usually equipped with a water sof-
tener, type DP2 or DP4, which must be connected
by the user in compliance with the laws in force.
Should a different softener be installed, refer to the
documentation of the relevant product.
A dreg drawer should be tted by the installer.
user
Hook-up must be carried out by qualied
personnel in full accordance with federal,
state and local regulations.
(Fig.6)
This equipment is to be installed to
comply with the applicable federal, state
or local plumbing codes.
Connections must be installed close to the machine.
● Water drainage pipe 1, having a minimum internal
diameter of 30 mm, equipped with a water-trap
accessible for inspection.
● Water supply pipe 2, with a 3/8"G cut-off tap.
● Gas supply pipe 3, with a cutoff tap.
Make sure that the maximum supply pressure
does not exceed 6.5 bar; otherwise, install a
pressure reducer.
The machine with gas heating must be instal-
led in compliance with current local laws.
The machine is delivered in a strong cardboard box
with internal protection.
The packaging bears symbols which must be obser-
ved during handling and stocking of the item.
Always keep the package in a vertical position
during transport. Do not turn it over or lay it
on its side and avoid bumping and exposure
to atmospheric agents.
Check that the machine received corresponds to
the one indicated on the delivery note, including any
accessories.
Check that it has not been damaged during transport
and, if so, inform the forwarder and our customer
service ofce immediately.
The packing elements (plastic bags, expan-
ded polystyrene, nails, cardboard, etc.) must
not be left within reach of children as they are
potential sources of danger. Do not dispose
of the packing elements in the environment;
consign them to rms authorized for their
disposal.
The user must not:
● touch the hot surfaces and dispensing areas;
● place liquids containers on the machine;
● put his hands under the spouts during use;
● transport the machine or carry out maintenance
operations when the plug is connected or when
the machine is hot;
● wash the machine with water or steam jet;
● dip completely or partially the machine in water;
● use the machine if the cable is damaged;
● touch the machine when his hands or feet are wet
or damp;
● use the machine when there are children in its
proximity;
● allow the machine to be used by children or unt
people;
● obstruct the suction or dispersal grilles with cloth
or any other thing;
● do not use the machine when wet or very damp.
This machine may only be used with foodstuffs. It
cannot be used for heating liquids or grinding any other
kind of product that could damage and pollute it.
The manufacturer cannot be held responsible
for damage to people or things caused by
unsuitable, erroneous or irrational use.
74
The machine is supplied ready for connection
according to the required electrical specications.
Before connecting the machine ensure that the plate
details comply with those of the electric distribution
network.
The electrical connection cable must be directly
connected to the connection provided according to
current legislation. Ensure that the earthing system
is efcient and in compliance with current legal re-
quirements.
The earthing system and the lightening protection
system must be realized in accordance with the
provisions of current legislation.
For the supply network use a cable in compliance with
standards with protective conductor (earthing wire).
For three-phase power use a cable with 5 conductors
( 3 phases + neutral + earth).
For single phase power supply use a cable with 3
conductors (phase + neutral + earth).
In both cases it is necessary to provide an automatic
differential switch () at the start of the power
cable, complete with magnetic release elements in
accordance with the identication plate details (
1). The contacts must have an opening of equal or
over 3 mm and with dispersed current protection of
30 mA.
Remember that each machine must be tted with its
own safety elements.
Should the power supply cable be damaged
it is to be replaced by the manufacturer or by
its technical assistance service or by person
with equivalent qualication, in order to pre-
vent any risks.
(Fig.7)
P O T E N T I A L - E Q U A L I Z I N G
CONNECTION
This connection, which is the one called for by several
norms, avoids electrical potential differences, building
up between any equipment that may be installed in
the same room. There is a terminal clip on the under
side of the base of the machine to which an external
potential-equalizing wire should be connected.
This connection is ABSOLUTELY NECESSARY and
must be made right after the machine is installed.
Use a wire whose cross-sectional area conforms to
the existing norms.
CONNECTIONS
● Place the machine on the horizontal surface pre-
viously prepared.
Before connecting, thoroughly wash the mains water
pipes:
● Leave the water supply taps running at full pres-
sure for several minutes.
● Connect to the mains water supply.
● Connect the machine to the socket.
● Connect the gas pipe
Thoroughly wash all the water pipes of the machine:
● Leave the water supply taps running at full pres-
sure.
● Switch on main switch 1 (Fig.8): wait until the boiler
lls up to the level set.
● Boiler resistance switch2 (Fig.8) to begin heating
the water in the boiler.
● Operate each unit in order to allow the water to
escape for about one minute; repeat the operation
twice.
● Deliver steam from the steam jets for about one
minute.
● Deliver hot water for about one minute; repeat the
operation twice.
● Switch off switches 1 and 2.
● Empty the water from the boiler: see point 10.3.
IMPORTANT
Should the machine not deliver water for over
24 hours, wash the internal components be-
fore beginning work, repeating the operations
as described above.
75
OPERATION
(Fig.8)
Two-position switch with led.
Turn on the switch (led on) the machine is turned
(apart from the boiler) and the pump is turned on
to ll the boiler;
Two-position switch with led.
On activating the switch (the led comes on) and
power is supplied to the resistance for the boiler
water.
(mod.S)
Two-position switch:
With switch ON, coffee is dispensed;
With switch OFF, dispensing of coffee is interrup-
ted.
4 Dispenser control lever (mod.RE)
Move the lever downward to start dispensing cof-
fee.
To stop dispensing, move the lever upward.
5 Coffee Dispensing Electronic Panel (mod. USB)
Five buttons with relative led:
A Press the button for a second, led on, release
button; a small coffee is dispensed.
The led turns off and dispensing ceases.
B Press the button for a second, led on, release
the button; two small coffees ar dispensed from
the same unit.
The led turns off and dispensing ceases.
C Press the button for a second, led on, release
the button; a big cup of coffee is dispensed.
The led turns off and dispensing ceases.
D Press the button for a second, led on, release
the button; two big cups of coffee are dispensed
from the same unit.
The led turns off and dispensing ceases.
E Press the button for a second, led on, release
the button; coffee is continuously dispensed.
Press the button for a second, led off, release
button; continuous dispensing of coffee ceases.
To interrupt brewing once the operation has been
activated with buttons A-B-C-D, press the same
button again or press E.
Each time a coffee is dispensed, the LED of the
relative button lights up.
If pressed for approx. 8 sec., the dose quantity
programming function is accessed.
During dose programming, the LED of the 5
th
button ashes rapidly.
If the dose is supplied irregularly or the volumetric
counter is malfunctioning, the LED of the pressed
button ashes dispensing the dose on a time ba-
sis.
(mod.S-RE)
Cup-warmer switch with two positions:
With switch ON, the LED ashes and the cup
warmer resistance is energized.
With switch OFF, the LED switches off and the
resistance is de-energized.
Two-position hot water switch (thermoregula-
ted):
With switch ON, the LED ashes and thermore-
gulated hot water is dispensed.
With switch OFF, the LED switches off and dispen-
sing stops.
Hot water switch (picking up directly from the
boiler) with two positions:
With switch ON, the LED ashes and hot water is
dispensed directly from the boiler.
With switch OFF, the LED switches off and dispen-
sing stops.
(mod.USB)
This panel features 5 buttons and 5 LEDs consi-
sting of the following:
1 cup-warmer button (7.1)
2 buttons for dispensing hot water (7.2 - 7.3)
3 keys for dispensing hot water blended with the
temperature control function (7.3 - 7.4 - 7.5)
The function provides for 4 setting levels of resi-
stance heating strength:
off, minimum, medium, maximum (pls. consult par.
9.5).
When the button is pressed, hot water is dispensed
directly from the boiler for the set time or until the
button is pressed again.
If the key is kept pressed in for 2 seconds, the
dispensing ow becomes continuous and it will
stop only if the key is pressed in again.
The dispensing ow is anyway stopped automati-
cally after 30 sec.
-
rature control function (4-TEA)
Pressing on any one of the keys will start dispen-
sing of the temperature-controlled water for the set
amount of time, or until the key is pressed in again.
During this dispensing cycle, the pump starts up.
The default programming of the 3 keys provides
for different water temperatures, ranging between
85°C (7.3) and 60°C (7.5). The temperatures and
the dispensing times can anyway be program-
med. It is also possible to set a dispensing option
providing cold water taken directly from the water
mains line.
If the key is kept pressed in for 2 seconds, the di-
spensing ow becomes continuous and it will stop
only if the key is pressed in again. The dispensing
ow is anyway stopped automatically after 30
seconds.
76
● Turn on the water supply tap 2 Fig.6.
● Turn the main switch 1; the pump is activated, lling
the boiler.
● When the water reaches the correct level, the pump
stops.
Turn the main switch 2 to begin heating the water
in the boiler then turn each one until water begins
to ow from them.
● Wait for the machine to reach its working pressure
and to reach the correct thermal balance.
(Fig.8)
● Turn on the water supply tap 2 (Fig.6).
● Turn on the gas tap 3 (Fig.6).
●Turn the main switch 1; the pump is activated, lling
the boiler.
● When the correct level is reached, the pump stops.
Turn the switch 2.
● Turn the gas tap 10 to the vertical open position
and hold down the incorporated button, at the same
time repeatedly press hard on the piezelectric but-
ton 11 until the spark lights the gas ame (carry out
this operation looking through window 14). Hold
the tap button 10 down for approx. 30 seconds to
allow the safety system to keep the ame lighted.
If the ame goes out, repeat the operation.
Should the ame not light up, avoid insisting
and close the gas tap by turning it 90° in a
clockwise direction.
● Wait until the machine reaches its working pressure
and until the correct thermal balance is achieved.
Press the button to excite the steam and emulsion
delivery electromagnetic valves until the program-
med temperature and froth level are reached or
until the function is switched off.
Pressing the key excites the steam distribution
electro-valves until the programmed temperature
is reached or until the same is pressed again.
Dispensing cannot be carried out if the machine
has not reached the operating pressure or tempe-
rature at least once, and each time that the boiler
pressure drops too much.
Rotating the turn-knob upwards will open the tap;
the turn-knob will remain in open position to allow
for a continuous steam supply. To close the tap,
turn the turn-knob back into its horizontal position.
Rotating the turn-knob downwards provides for
instant steam supply. Once it is released, the turn-
knob will go back into its horizontal position and
the steam supply is instantly stopped.
-
Press down to ll the boiler.
(models with gas heating).
Open: vertical position;
Closed: turn 90° in clockwise direction.
(models with gas heating).
Firing button: press down rmly to give off the
spark to light the gas for the burner.
(Fig.8)
12 Gauge with mobile needle on a xed dial with a
double scale.
Visual control of the pump (manometer on the left-
hand side) and of the boiler pressure (manometer
on the right-hand side)
13 Minimum and maximum water
Visual control of water level in boiler.
(models with gas heating).
Visual control of lighting and functioning of the
ame of the gas burner.
77
The machine has a top shelf on which the cups are
kept and heated, ready for use.
This is very important to obtain good coffee as the
pre-warmed cup stops the coffee from growing cold
too quickly.
● Unclamp the lter-holder from the dispensing unit
and knock any grouts out into the drawer espe-
cially provided for this purpose, taking care not to
damage the rim of the lter.
● Use the filter for 1 or 2 coffees, according to
need.
● Fill the lter with the measure of coffee, level it off
and press it down gently with the presser.
● Remove any ground coffee that has stuck to the
rim of the lter while pressing.
If ground coffee is left on the rim of the lter, a
leaktight seal is not ensured, with consequent
leaking of water and coffee grounds.
● Lock the lter-holder into the dispensing unit rmly
to obtain a leaktight seal.
● Place the cups under the spouts and start pouring
using control 3 - 4 or button panel 5 according to
model (Fig.9).
● When the coffee has been poured, leave the lter-
holder attached to the dispensing unit until the next
coffee is required.
When pouring, beware of the hot parts of the
machine, especially the coffee dispensing
units, the steam and hot water spouts. Do not
put your hands for any reason under the units
and the spouts when they are operating.
The grinding of the coffee beans is of fundamental
importance to the making of good coffee, and the
granular texture of the resulting grounds should
be such that it takes 25-30 seconds to produce the
beverage. If the coffee is ground too coardsely the
coffee will be pale in colour and weak in avour, with
only a very small amount of white cream, and if the
grounds are too ne, the coffee will be dark with no
cream. Good coffee can only be made if the beans
are freshly and uniformly ground (only possible when
the blades of the coffee grinder are sharp) and are
then measured out into the correct quantities (roughly
6 grams per measure).
The importance of freshly ground coffee beans is
due to the fact that once ground, they rapidly lose
their aromatic qualities, and fats present in the beans
go rancid.
(Fig.9)
● Make cup of cappuccino with the express coffee.
● Use a high and narrow jug, half-lled with milk.
●Place the jug under the spout so that the nozzle
touches the bottom.
● Turn on the steam tap and lower the jug so that
the nozzle is almost at the surface of the milk.
● Now, raise and lower the vessel constantly so that
the steam nozzle is immersed in and out of the
milk to create the froth.
● Turn off the steam tap and pour the milk into the
cup.
Immediately after carrying out this operation,
clean the spout with a sponge or a clean
cloth so that the milk does not dry on it. Be
careful as the spout is hot and may burn
your hand.
● Immerse the steam spout into the liquid to be
heated.
● Gradually turn on the steam tap 8 Fig.8; the steam
that bursts in the liquid heats it to the desired tem-
perature.
● Turn off the steam tap when the desired tempera-
ture has been reached.
Immediately after carrying out this operation,
clean the spout with a sponge or clean cloth.
Be careful as the spout is hot and may burn
your hand
● Place the jug under the hot water spout and use
the delivery control according to the model (Fig.8).
When the desired quantity has been obtained, turn
off the switch.
● Add the beverage desired.
Models USBFor these models, hot water is dispensed
in specic measures (see paragraph 9, adjusting
the dose of hot water).
To dispense hot water in different quantities, proceed
as follows:
● Hold down the delivery control 7.2 o 7.3 o 7.4 o 7.5
(Fig.8) for at least four seconds then release the
button; the machine continuously delivers water.
● When the desired measure has been obtained,
press the button E again to interrupt delivery.
When the dose of hot water is being delivered electro-
nically, delivery can be interrupted by pressing the
button 7.3.
When puried water is used, these beverages often
assume a darker colour.
Should the user prefer a lighter coloured drink, draw
fresh water from an ordinary tap and proceed with
the heating phase as described in point 8.3.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
