Holux M-1000C - Connection Manual

Type
Connection Manual

This manual is also suitable for

How to connect Android device with M-1000C/M-1200E via
Bluetooth
1.Please download Bluetooth GPS from the link below:
https://play.google.com/store/apps/details?id=googoo.android.btgps
Please note, it is necessary to log in your Google Account to download APPs
from Google Play
If you have any questions about operating Google Play, you may refer to the
official support page from Google:
https://support.google.com/googleplay/digital-content?hl=zh-Hant&rd=1#topic
=3364260
2. After finishing setup, please pair your device with M-1000C/M1200E first
3. Go to SettingsLocation Service and disable internal GPS
4. Open Bluetooth GPS and select paired GPS device
Select paired GPS
device here
Disable
internal GPS
Click Enable Mock GPS Provider and press Connect
Bluetooth GPS will start to connect with M-1000C/M-1200E
2. Press Connect
1. Enable Mock
GPS Provider
5. When the connection is established, your Android Smart Phone/Tablet will
able to receive GPS signals from M-1000C/M-1200E.Also you could check all
the GPS info via Bluetooth GPS.
Note:
If your device will switch to Developer options menu when clicking Enable
Mock GPS Provider, please enable Allow mock locations option and go
back to Bluetooth GPS to click Enable Mock GPS Provider again.
Click this
option
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Holux M-1000C - Connection Manual

Type
Connection Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI