Holux M 1200E Connection Manual

Brand: Holux

Model: M 1200E

Type: Connection Manual

This manual is also suitable for

M-1000C -

How to connect Android device with M-1000C/M-1200E via

Bluetooth

1.Please download Bluetooth GPS from the link below:

https://play.google.com/store/apps/details?id=googoo.android.btgps

Please note, it is necessary to log in your Google Account to download APPs

from Google Play。

If you have any questions about operating Google Play, you may refer to the

official support page from Google:

https://support.google.com/googleplay/digital-content?hl=zh-Hant&rd=1#topic

=3364260

2. After finishing setup, please pair your device with M-1000C/M1200E first

3. Go to Settings＞Location Service and disable internal GPS

4. Open Bluetooth GPS and select paired GPS device

Select paired GPS

device here

Disable

internal GPS

Click Enable Mock GPS Provider and press Connect

Bluetooth GPS will start to connect with M-1000C/M-1200E

2. Press Connect

1. Enable Mock

GPS Provider

5. When the connection is established, your Android Smart Phone/Tablet will

able to receive GPS signals from M-1000C/M-1200E.Also you could check all

the GPS info via Bluetooth GPS.

Note:

If your device will switch to Developer options menu when clicking Enable

Mock GPS Provider, please enable Allow mock locations option and go

back to Bluetooth GPS to click Enable Mock GPS Provider again.

Click this

option

1
2
3
4
5

Holux M 1200E Connection Manual

Brand: Holux

Model: M 1200E

Type: Connection Manual

This manual is also suitable for

M-1000C -

Related papers

Other documents