bluPen.2
Multifunctional Bluetooth™ Stereo Mini-Handset
with Stylus Pen
User Guide
Introduction
Thank you for purchasing Promate bluPen.2 Multifunctional Bluetooth™ Stereo Mini-Handset
with Stylus Pen. This mini-handset has been created with multiple functions, perfect power
and sync quality, ultra-high reliability and uniquely fined outlook.
Hereby stated are the features for this product for better understanding of its functions.
• Stereo Bluetooth™ mini-handset
• Detachable conductive silicone stylus pen
• Multifunctional buttons for call, tracks and volume controls
• High-quality audio earphones
• Dual ultra-sensitive microphone
• Vibration mechanism for incoming call
• 5th Gen CVC® Noise suppression and echo cancellation
• Dual-microphone audio algorithm offering enhanced near and far noise reduction
• Make, receive and cancel calls all while listening to music
• Compatible with smartphones, tablets and all Bluetooth™ enabled audio devices
• Exquisite, pocket friendly and mini design for ultimate portability
Packaging Contents
• bluPen.2
• Micro-USB cable
• Earphones with earbud replacements
• Stylus tip
• User Guide
• Warranty card
Precautions
Please read this User Guide carefully before using the product.
The contents herein may be changed to deliver the better services to the end-user. To keep
the perfect performances of the product, never use it in cold, hot, dusty or moistened areas or
places, especially in the following conditions:
1. Moist or underwater conditions.
2. Conditions near the heater or high-temperature service.
3. Conditions with direct sunshine.
4. Conditions with apt falling.
5. Never dismantle the product without due permission, otherwise it may nullify the
warranty clauses.
1. Product Overview
Introduction
The bluPen.2 is a multifunction gadget built for touch-screen smartphones and tablets.
Bluetooth™ pairing with the device, the bluPen.2 serves primarily as a call handset using its
ultra-sensitive mic and in-built stereo mini-speaker. Enhances the audio with its included
earphones and specially designed 5th Gen CVC® CSR chipset for superb noise suppression
and echo cancellation for a crystal clear sound quality. bluPen.2 also carries a vibration
mechanism for a quiet incoming call notification. Its secondary feature allows the device to be
a conductive stylus pen by replacing its tip and use it for any touch-screen devices for a more
precise swiping, drawing or even writing. The bluPen.2 is simply a complete solution for
touch-sensitive mobile and tablet devices.
2. Appearance and Interface Description
1 3.5mm audio jack
2 Microphone
3 Status indicator
4 Volume +/-
5 Charging jack
6 Capacitive stylus
7 Microphone
8 Multifunction button
9 Dustproof receiver
3. Instructional Usage
3.1 Charging
1. Connect the Micro-USB charging cable on the charging port.
2. Red LED lit up to shows it is charging.
3. Red will turn into blue once fully charged.
3.2 Pairing
1. Press and hold the multifunction button about 7 seconds to switch on the
mini-handset, it automatically enters the pairing mode. The red and blue indicator
lights flashes alternately.
2. Activate the Bluetooth™ feature on your phone or other Bluetooth™ devices and set it
to search for new Bluetooth™ devices.
3. Select "bluPen.2" from the list of found devices on your phone or other Bluetooth™
devices and connect. If necessary, enter passcode 0000 to pair and connect the
headset to your device. Now you can use bluPen.2 for phone calls or listening to
music.
3.3 Basic Operation
Function Operation LED status Alerts Explanation
Receive a call
Short press any key to
answer the call
Blue
Constinuous sound and
vibration alert
With continuous prompt
tone for incoming call
End a call
Short press the
multifunction button
N/A N/A
Or end the call with the
mobile device
Reject a call
Long press the vol - or vol
+ button for 2 seconds
N/A With beep alerts
Long press the vol - or vol
+ button for 2 seconds
Last number redial
Double short press the
multifunction button
N/A N/A
The mobile will redial the
last dialled by double
short press the
multifunction button
Voice dial
Press the vol - and vol +
simultaneously
N/A N/A
This function depends if
supported by the mobile
device
Call transfer to
mobile device
Long press the vol - button
for 2 seconds
N/A N/A
Call will be transferred to
the mobile device, audio
will automaticall
transferred back to
bluPen.2 after ending the
call
Mute mode
Long press the vol +
button for 2 seconds
N/A N/A
Mute mode will stay until
the end of the call
Volume up
Short press the vol +
button
N/A N/A
Short press the vol +
button to increase the
volume
Volume down
Short press the vol -
button
N/A N/A
Short press the vol -
button to decrease the
volume
Previous song
Long press the vol - button
for 2 seconds
N/A N/A
Long press the vol - button
to go to the previous song
Next Song
Long press the vol +
button for 2 seconds
N/A N/A
Long press the vol +
button to go to the next
song
Music pause/play
Press the multifunction
button to pause/play the
music
N/A N/A
Music will pause after
short press of the
multifunction button, and
press again to play
Headset reset
On standby status, press
and hold the multifunction
button and connect the
charging cable
N/A N/A
Press and hold the
multifunction button and
connect the charging cable
while the mini-handset is
on
Battery low alerts N/A
Red LED
flashes
every 8
seconds
Will beep every 30 seconds
Flashes Red LED when
battery is low
Delete paired
devices list
Press the vol - and vol +
simultaneously, after 4
seconds, connect the
charging cable
Blue LED
flashes 3
times
The paired devices list will
be deleted
/
