Aaeon EMB-Q170B User manual

Brand: Aaeon

Model: EMB-Q170B

Category: Motherboards

Type: User manual

Industrial Motherboard

EMB-Q170B

E15309

Revised Edition V4

March 2019

This document is copyrighted, 2019. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products described

in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use,

or for any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to

change without notice. While reasonable efforts have been made in the preparation

of this document to assure its accuracy, the original manufacturer assumes no

liabilities resulting from errors or omissions in this document, or from the use of the

information contained herein.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

Acknowledgments

All other products’ name or trademarks are properties of their respective owners.

• AMI is a trademark of American Megatrends Inc.

• Intel

, Core™ are trademarks of Intel® Corporation.

• Microsoft Windows

is a registered trademark of Microsoft Corp.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

All other product names or trademarks are properties of their respective owners.

iii

Contents

Chapter 1: Product overview

1.1 Package contents ......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specications ............................................................................... 1-2

Chapter 2: Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Screw size ..................................................................................... 2-4

2.3.1 Component side .............................................................. 2-4

2.3.2 Solder side ...................................................................... 2-5

2.4 Central Processing Unit (CPU) ................................................... 2-6

2.4.1 Installing the CPU ........................................................... 2-7

2.4.2 CPU heatsink and fan assembly installation ................... 2-9

2.5 System memory ......................................................................... 2-11

2.5.1 Installing a DIMM .......................................................... 2-11

2.6 Jumpers ...................................................................................... 2-13

2.7 Onboard LEDs ............................................................................ 2-17

2.8 Connectors ................................................................................. 2-18

2.8.1 Rear panel connectors .................................................. 2-18

2.8.2 Internal connectors ....................................................... 2-19

Chapter 3: BIOS setup

3.1 BIOS setup .................................................................................... 3-1

3.1.1 Menu bar ......................................................................... 3-2

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-3

3.3.1 CPUConguration .......................................................... 3-3

3.3.2 Trusting Computing ......................................................... 3-3

3.3.3 SATAConguration ........................................................ 3-4

3.3.4 USBConguration .......................................................... 3-5

3.3.5 Hardware Monitor ........................................................... 3-5

3.3.6 SIOConguration ........................................................... 3-9

3.3.7 AMTConguration .......................................................... 3-9

3.3.8 PCH-FWConguration ................................................. 3-10

3.3.9 Power Management ...................................................... 3-10

3.3.10 DigitalIOPortConguration ......................................... 3-11

3.4 Chipset menu ............................................................................. 3-11

3.4.1 SystemAgent(SA)Conguration ................................. 3-11

3.5 Security menu ............................................................................ 3-12

3.5.1 Administrator Password ................................................ 3-12

3.5.2 User Password .............................................................. 3-12

3.6 Boot menu .................................................................................. 3-13

BootConguration ....................................................................... 3-13

3.7 Save & Exit menu ....................................................................... 3-14

Appendix

Notices .......................................................................................................A-1

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x Industrial Motherboard

1 x SATA cable

1 x SATA power cable

1 x I/O Shield

1 x Support CD

If any of the above items is damaged or missing, contact your distributor or

sales representative immediately.

1.2 Features

• Intel

Socket 1151 for 6th/7th Generation Core™ i7/ Core™ i5/ Core™ i3,

Pentium

and Celeron™ processors up to 65W

• 2 x SO-DIMM, max. 32GB, 260-pin DDR4 2133/1867 MHz, Non-ECC, Un-

buffered Memory

• SATA 6.0 Gb/s x 4, USB3.0 x 4, USB2.0 x 6

• 1 x PCIe 3.0 [x4], 1 x M.2 M key (22 x 80mm) for PCIe [x4] / SATA at the

bottom side, 1 x M.2 E key (22 x 30mm) for PCIe / USB / I2C-ME / SDIO /

UART / PCM at mid-board

• DP, eDP, 18/24-bit Dual Channel LVDS support

Chapter 1

Product overview

EMB-Q170B

1-2

1.3 Specications

System

Form factor

Mini-ITX

CPU

Intel

Socket 1151 for 6th/7th Generation Core™ i7/ Core™ i5/

Core™ i3, Pentium

and Celeron™ processors up to 65W

Chipset

Intel

Q170 Express Chipset

Memory

2 x SO-DIMM, Max. 32GB, 260-pin, DDR4 2133/1867 MHz, Non-

ECC, Un-buffered Memory

Dual channel memory architecture

I/O Chipset

NCT6791D

Storage

Intel

Q170 Express Chipset supports 4 x SATA 6.0Gb/s

Ethernet

1 x Intel PCIe Gb LAN 219LM for vPro

1 x Intel PCIe Gb LAN 211AT

Audio

Realtek

ALC887

TPM

InneonSLB96XXTT1.2coay2.0(Default:No)

Expansion slot

1 x PCIe 3.0 [x4]

1 x M.2 M key (22 x 80mm) for PCIe[x4]/SATA at bottom side

1 x M.2 E key (22 x 30mm) for PCIe/USB/I2C-ME/SDIO/UART/PCM at top

side

BIOS

128Mbit Flash ROM, AMI BIOS

Wake on LAN

Yes (WOL/PXE)

Watchdog Timer

1~255 steps by software program

H/W Status Monitor

Monitors CPU/Chassis temperature

Monitors Vcore/5V/12V voltages

Monitors CPU/Chassis fan speed

Smart Fan Control

CPU Fan / Chassis Fan

Power State

S3, S4, S5

Graphics

Graphics Multi Display

2 x DP, 1 x eDP, 1 x LVDS

Up to 4096 x 2160 MHz @ 24 Hz / 3840 x 2160 MHz @ 60 Hz, with Digital

Audio

LVDS / eDP

LVDS:Upto1920x1200MHz@60Hz,DualChannel18/24bit

eDP:UPto4096x2340MHz@60Hz(couldonlyuse1functionatatime

since only support 1 x inverter)

Backlight Control

Voltage / PWM

Environement & Power & ME

Battery

Lithium battery

Power requirement

12V DC

Form Factor

Mini ITX Form Factor, 6.7”x 6.7” (170mm x 170mm)

Weight

1.1 lb (0.5 Kg)

Operating temperature

F~140

F (0

C~60

Operating humidity

0%~90% relative humidity, non-condensing

Certicate

CE/FCC (Class A)

(continued on the next page)

1-3

Chapter 1: General information

I/O

Storage

4 x SATA 6.0Gb/s, supports RAID 0/1/5/10

1 X M.2 (M-key), (22 x 80mm) (PCIex4/SATA)

4-pin SATA power (5V, 12V @1A)

USB

4 x USB 3.0 ports (Rear IO)

6 x USB 2.0 ports (internal pin header)

Display I/O

2 x DP, 1 x eDP, 1 x LVDS

Audio I/O

Mic-in, Line-out, AAFP, internal speaker

LAN I/O

2 x RJ-45 ports

Serial port

1 x RS-232/422/485 supports 5V/12V/RI option (mid board)

DIO

8-bit Digital I/O interface (4-in / 4-out)

FAN

1 x CPU Fan connector (4-pin)

1 x Chassis Fan connector (4-pin)

Placement

Back panel I/O ports

1 x DC Jack

2 x DP

2 x LAN (RJ-45) ports

4 x USB 3.0 ports

1 x Audio jack (Mic-In) pink connector

1 x Audio jack (Line-Out) green connector

Internal I/O

connectors

1 x PCIe x4 slot

1 x M.2 M key (22 x 80mm) at bottom side

1 x M.2 E key (22 x 30mm) at top side

4 x SATA 6.0Gb/s ports

1 x 4-pin SATA power connector

3 x USB 2.0 pin header support additional 6 USB ports

1xboxerheaderforCOM(COM1:RS-232/422/485supports5V/12V/RI)

1 x 40-pin LVDS connector

1 x 40-pin eDP connector

1 x LVDS 3.3V / 5V jumper

1 x LCD DC / PWM mode jumper

1 x LCD backlight connector (inverter)

1 x LCD backlight 12V / 5V jumper

1 x Digital I/O box header

1 x 4-pin (2x2) internal power connector

1 x 4-pin CPU Fan connector

1 x 4-pin Chassis Fan connector

1 x Front Panel connector

1 x AAFP connector follows ASUS pin out

1xSpeakerconnectorfor2W/4Ω

1 x Chassis Intrusion connector

1 x Buzzer on board

1 x AT/ATX mode selection jumper

1 x Clear CMOS jumper

(continued on the next page)

EMB-Q170B

1-4

Others

OS support

Windows

7 32-bit / 64-bit (not supported when using a Kaby Lake

processor)

Windows

8.1 32-bit / 64-bit (not supported when using a Kaby Lake

processor)

Windows

10 64-bit

Linux Fedora

Accessories

1 x SATA cable

1 x SATA power cable

1 x I/O shield

1 x Support DVD

NOTE: Specicationsaresubjecttochangewithoutnotice.

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplugthepowercordfromthewallsocketbeforetouchingany

component.

• Beforehandlingcomponents,useagroundedwriststraportouchasafely

groundedobjectorametalobject,suchasthepowersupplycase,toavoid

damaging them due to static electricity.

• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.

• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic

pad or in the bag that came with the component.

• Beforeyouinstallorremoveanycomponent,ensurethattheATXpower

supply is switched off or the power cord is detached from the power

supply.Failuretodosomaycauseseveredamagetothemotherboard,

peripherals,orcomponents.

EMB-Q170B

2-2

EMB-Q170B

EATX_PWR2

EATX_PWR1

USB3_12

LAN1

LAN2

CLRTC1

DIS_ME

17.0cm(6.7in)

SATA6G_4SATA6G_3SATA6G_2SATA6G_1

F_PANEL1

CHASSIS

USB78USB56 USB910

CHA_FAN1 CPU_FAN1

DDR4 DIMM_A1 (64bit, 260-pin module)

DDR4 DIMM_B1 (64bit, 260-pin module)

INV

LJ2

LJ1

LJ3

DIOCOM

COM_V

LVDS

BOTTOM:EDP

SATA_PWR

AAFP

ALC

887

BIOS_P

Intel

211AT

Intel

219LM

Intel

Q170

Super

I/O

PCIEX4_1

CH7511

BZ1

LGA1151

LINE-OUT

MIC-IN

AMP_CON1

BATTERY_H

LED_+5V

LED_+5VSUS

128Mb

BIOS

M.2(SOCKET3)

8 9763 541 2

ATMODE

2022 21

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place four screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION!Donotovertightenthescrews!Doingsocandamagethe

motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots

Page

12VDCconnector(4-pinEATX_PWR2) 2-19

Chassis/CPUfanconnectors(4-pinCPU_FAN1,4-pinCHA_FAN1) 2-20

SerialATA6.0Gb/sconnectors(7-pinSATA6G_1~4) 2-21

COM1Ring/+5V/+12Vselection(COM1_V1) 2-15

Serialportconnectors(10-1pinCOM1) 2-25

DigitalI/Oconnector(DIO) 2-26

SO-DIMMmemoryslots 2-11

Inverterbacklightcontrolmodeselection(3-pinLJ3) 2-14

Invertervoltageselection(3-pinLJ2) 2-15

10.

LVDSpanelvoltageselection(3-pinLJ1) 2-14

11.

Backlightinverterpowerconnector(5-pinINV1) 2-22

12.

LVDSconnector(40-pinLVDS1) 2-22

13.

EmbeddedDisplayPort(40-pineDP) 2-24

14.

ClearRTCRAM(CLRTC) 2-13

15.

Chassisintrusionconnector(4-1pinCHASSIS) 2-16

16.

Intel

LGA1151CPUsocket 2-6

17. ATMODEselection(3-pin) 2-17

18. BIOSprogrammableconnector(8-pinBIOS_P) 2-23

19.

M.2E-Key(Top)

2-26

20. StandbyPowerLED(LED1_+5V,LED1_+5VSUS) 2-17

21. Batteryconnector(2-pinBATTERY_H) 2-19

22. Speakeroutconnector(AMP_CON1) 2-24

23. Frontpanelaudioconnector(10-1pinAAFP) 2-20

24.

Intel

MEJumper(3-pinDIS_ME)

2-16

25. SATApowerconnector(SATA_PWR1) 2-21

26.

M.2M-Key(Bottom)

2-26

27. USB2.0connector(10-1pinUSB_56,USB_78andUSB_910) 2-23

EMB-Q170B

2-4

2.3 Screw size

2.3.1 Component side

2-5

Chapter 2: Motherboard information

2.3.2 Solder side

EMB-Q170B

2-6

2.4 Central Processing Unit (CPU)

ThemotherboardcomeswithasurfacemountLGA1151socketdesignedforthe

Intel

6th/7thGenerationCore™i7/Core™i5/Core™i3,Pentium

andCeleron

processors.

EMB-Q170B

EMB-Q170B CPU socket LGA1151

IMPORTANT:UnplugallpowercablesbeforeinstallingtheCPU.

CAUTION!

• Uponpurchaseofthemotherboard,ensurethatthePnPcapison

thesocketandthesocketcontactsarenotbent.Contactyourretailer

immediatelyifthePnPcapismissing,orifyouseeanydamagetothe

PnPcap/socketcontacts/motherboardcomponents.Themanufacturerwill

shoulderthecostofrepaironlyifthedamageisshipment/transit-related.

• Keepthecapafterinstallingthemotherboard.Themanufacturerwill

processReturnMerchandiseAuthorization(RMA)requestsonlyifthe

motherboardcomeswiththecapontheLGA1151socket.

• Theproductwarrantydoesnotcoverdamagetothesocketcontacts

resultingfromincorrectCPUinstallation/removal,ormisplacement/loss/

incorrectremovalofthePnPcap.

2-7

Chapter 2: Motherboard information

2.4.1 Installing the CPU

2 3

CAUTION! EnsurethatyouinstallthecorrectCPUdesignedforLGA1151

only.DONOTinstallaCPUdesignedforLGA1155andLGA1156socketson

theLGA1151socket.

EMB-Q170B

2-8

2-9

Chapter 2: Motherboard information

2.4.2 CPU heatsink and fan assembly installation

CAUTION!ApplytheThermal

InterfaceMaterialtotheCPU

heatsinkandCPUbeforeyou

install the heatsink and fan if

necessary.

To install the CPU heatsink and fan assembly

3 4

EMB-Q170B

2-10

To uninstall the CPU heatsink and fan assembly

2-11

Chapter 2: Motherboard information

2.5 System memory

EMB-Q170B

EMB-Q170B 260-pin DDR4 SO-DIMM sockets

DIMM_B1

DIMM_A1

ThismotherboardcomeswithtwoDoubleDataRate4(DDR4)SmallOutlineDual

InlineMemoryModules(SO-DIMM)sockets.Thegureillustratesthelocationof

theDDR4SO-DIMMsockets:

2.5.1 Installing a DIMM

To install a SO-DIMM

EMB-Q170B

2-12

To remove a SO-DIMM

Page is loading ...

Aaeon EMB-Q170B User manual

Brand: Aaeon

Model: EMB-Q170B

Category: Motherboards

Type: User manual

Download PDF

report

Aaeon EMB-Q170B User manual

Aaeon EMB-Q170B User manual

Related papers

Other documents