AmazonBasics B07V2BGM4R User manual

Brand: AmazonBasics

Model: B07V2BGM4R

Category: Interface hubs

Type: User manual

This manual is also suitable for

‎B07V7RCF8H

AmazonBasics B07V2BGM4R is a 7-port USB hub with an AC adapter, designed to provide additional USB ports to a host computer. It is compatible with USB 3.0, 2.0, and 1.1 devices, allowing for fast data transfer and charging of multiple devices simultaneously. The USB 3.0 ports support SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 ports provide standard transfer rates of up to 480 Mbps. The hub is powered by an AC adapter, ensuring stable power supply for all connected devices.

USB 3.0 HUB with AC Adapter

HUB USB 3.0 de 10 Puertos con

Transformador para CA

Concentrateur à 10Ports USB3.0 avec

Adaptateur SecteurCA

B07V6MXF3C, B07V7RCF8H, B07V2BGM4R,

B07V4GJDLW, B07V8N689N, B07V6MVXNG

English . . . . . . . . . . . . . . . . . . . . . . . 3

Español . . . . . . . . . . . . . . . . . . . . . 17

Français . . . . . . . . . . . . . . . . . . . . . 28

IMPORTANT SAFETY

INSTRUCTIONS

Read these instructions carefully and

retain them for future use. If this product

is passed to a third party, then these

instructions must be included.

When using electrical appliances, basic safety

precautions should always be followed to reduce the

risk of ﬁre, electric shock, and/or injury to persons

including the following:

• Do not bend or kink the USB cable.

• Children shall not play with the product.

• Observe the safety instructions of any other

devices connected to the product.

Power Adapter Warnings

• Protect the product from extreme temperatures,

hot surfaces, open ﬂames, direct sunlight, water,

high humidity, moisture, strong jolts, vapors, and

solvents.

• Disconnect the power adapter from the power

outlet when it is not in use.

•

Keep the power adapter out of the reach of children.

• Use this product only with the provided power

adapter (model K36V050400U; 5 V ; 4 A).

SAVE THESE

INSTRUCTIONS

Explanation of Symbols

This product is for indoor use only.

Positive (+) and negative (-) polarity

connection.

Alternating current (AC).

Direct current (DC).

This product is classiﬁed as protection

class II. This means the product is

equipped with reinforced or double

insulation between the mains supply circuit

and the output voltage or the casing.

Therefore it does not require a safety

connection to an electrical earth (ground).

This product complies to US energy

efficiency VI standard.

Intended Use

•

This product is intended to provide a host computer

with additional USB ports.

• This product is intended to connect several

interfaces such as scanners, printers, smart

tablets, smartphones, mice, and other data

storage devices.

• This product is intended for household use only.

It is not intended for commercial use.

• This product is intended to be used in dry indoor

areas only.

• No liability will be accepted for damages resulting

from improper use or non-compliance with these

instructions.

Product Description

B07V6MXF3C, B07V7RCF8H

B07V2BGM4R, B07V4GJDLW

B07V8N689N, B07V6MVXNG

NOTICE

Only one model is provided.

USB 3.0

Master port

E DC power input socket

B LED indicator F

USB 3.0 cable (Type A

to Micro-B SuperSpeed)

USB 3.0 slave

port (blue)

G Power adapter

USB 2.0 slave

ports (white)

Before First Use

• Check the product for transport damages.

• Remove all the packing materials.

DANGER

Risk of suffocation! Keep any

packaging materials away from children – these

materials are a potential source of danger, e.g.

suffocation.

Connection

Connecting the power adaptor

• Connect the plug of the power adapter (G) to the

DC power input socket (E) of the product.

• Connect the power adapter to a power outlet.

Connecting the product to a computer

• Connect the USB 3.0 Micro-B SuperSpeed plug

to the corresponding port (A) of the product.

•

Connect the USB 3.0 cable (F) to the USB 3.0 port

on a computer. The LED indicator (B) lights up.

NOTICE

This product is backward compatible

and is designed to work with older USB versions

including USB 2.0 and USB 1.1.

NOTICE

Only the USB 3.0 slave port (C) can be

used to charge iOS devices.

Connecting USB devices

Connect USB device(s) to the USB port(s) (C/D) of

the product.

CAUTION

Risk of data loss! Do not disconnect

from a computer or USB device during data

transfer.Doing so may corrupt your data or damage

connected devices.

NOTICE

The total current consumption of all

connected devices must not exceed 4.0 A.

NOTICE

To achieve the SuperSpeed transfer

rate of USB 3.0, all devices and cables used must

be having USB 3.0 speciﬁcations and connected to

the corresponding USB 3.0 port (C) of the product.

Cleaning and Maintenance

WARNING

Risk of electric shock! To prevent

electric shock, unplug the power adapter before

cleaning.

WARNING

Risk of electric shock! During

cleaning do not immerse the power adapter in water

or other liquids. Never hold the power adapter under

running water.

Cleaning

• To clean the product, wipe with a soft, slightly

moist cloth.

• Never use corrosive detergents, wire brushes,

abrasive scourers, metal or sharp utensils to

clean the product.

• Disconnect the product from the power adapter

before cleaning.

Storage

Store the product in its original packaging in a dry

area. Keep away from children and pets.

FCC – Supplier’s Declaration of

Conformity

Unique Identiﬁer

B07V6MXF3C USB 3.0

10-Port HUB with AC

Adapter, Black

B07V7RCF8H USB 3.0

10-Port HUB with AC

Adapter, White

B07V2BGM4R USB 3.0

7-Port HUB with AC

Adapter, Black

B07V4GJDLW USB 3.0

7-Port HUB with AC

Adapter, White

B07V8N689N USB 3.0

4-Port HUB with AC

Adapter, Black

B07V6MVXNG USB 3.0

4-Port HUB with AC

Adapter, White

Responsible Party

Amazon.com Services, Inc

U.S. Contact

Information

410 Terry Ave N.

Seattle, WA

98109, United States

Telephone Number (206) 266-1000

FCC Compliance Statement

1. This device complies with Part 15 of the FCC

rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful

interference, and

(2) this device must accept any interference

received, including interference that may

cause undesired operation.

2. Changes or modiﬁcations not expressly approved

by the party responsible for compliance could void

the user’s authority to operate the equipment.

FCC Interference Statement

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio / TV

technician for help.

Canada IC Notice

• This Class B digital apparatus complies with

Canadian CANICES-3(B) / NMB-3(B) standard.

Speciﬁcations

Power adapter

Model number: K36V050400U

Voltage/frequency:

100-240 V 50/60 Hz

Input current: Max. 0.9 A

Output voltage/

current:

5 V , 4 A

USB hub

Voltage / current:

5 V , max. 900 mA per USB

3.0 port; max. 500 mA per USB

2.0 port

Master unit

interface:

1 x USB 3.0 Micro-B

SuperSpeed port

System

requirements:

Windows Vista, Windows XP,

Windows Me, Windows 2000,

Windows 7, Windows 8,

Windows 10

Mac OS X v10.12.2

Transfer rate:

USB 3.0 super speed (5 Gbps)

backward compatible with

USB 2.0/1.1

USB 3.0

cablelength:

31.9" (80 cm)

Operating

conditions:

32 to 113 °F (0 to +45 ºC), 10 to

90 % RH (non-condensing)

Storage

conditions:

50 to 194 °F (10 to +90 ºC), 10 to

90 % RH (non-condensing)

Product

Net

weight

Dimension

Slave unit

interface

B07V6MXF3C,

B07V7RCF8H

approx.

10.3 oz

(291 g)

approx. 8.7

x 0.6 x 1.3"

(22 x 1.6 x

3.3cm)

2 x female

USB 3.0,

8 x female

USB 2.0

B07V2BGM4R,

B07V4GJDLW

approx.

9.5 oz

(270 g)

approx. 6.5

x 0.6 x 1.3"

(16.5 x 1.6

x 3.3cm)

2 x female

USB 3.0,

5 x female

USB 2.0

B07V8N689N,

B07V6MVXNG

approx.

8.7 oz

(247 g)

approx. 4.2

x 0.6 x 1.3"

(10.5 x 1.6

x 3.3cm)

4 x female

USB 3.0

Feedback and Help

Love it? Hate it? Let us know with a customer review.

AmazonBasics is committed to delivering customer-

driven products that live up to your high standards.

We encourage you to write a review sharing your

experiences with the product.

amazon.com/review/

review‑your‑purchases#

amazon.com/gp/help/

customer/contact‑us

amazon.com/AmazonBasics

V02-11/19

MADE IN CHINA

HECHO EN CHINA

FABRIQUÉ EN CHINE

AmazonBasics B07V2BGM4R User manual

Brand: AmazonBasics

Model: B07V2BGM4R

Category: Interface hubs

Type: User manual

This manual is also suitable for

‎B07V7RCF8H

Download PDF

report

AmazonBasics B07V2BGM4R User manual

This manual is also suitable for

AmazonBasics B07V2BGM4R User manual

Related papers

Other documents