247E3L

Philips 247E3L, 247E3LHSU, 247E3LPHSU, 247E3LSU, 247E3LSU2 User manual

  • Hello! I am an AI chatbot trained to assist you with the Philips 247E3L User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.philips.com/welcome
247E3L
EN Usermanual 1
Customercareandwarranty 30
Troubleshooting&FAQs 35
Table of Contents
1. Important ................................................1
1.1 Safetyprecautionsandmaintenance...1
1.2 NotationalDescriptions.............................2
1.3 Disposalofproductandpacking
material................................................................3
2. Setting up the monitor .........................4
2.1 Installation...........................................................4
2.2 Operatingthemonitor...............................6
2.3 RemoveBaseStand......................................9
3. Image Optimization .............................10
3.1 SmartImageLite...........................................10
3.2 SmartContrast..............................................11
3.3 PhilipsSmartControlLite.......................11
4. PowerSensor™ ....................................17
5. Technical Specifications ......................19
5.1 Resolution&PresetModes...................22
6. Power Management ............................23
7. Regulatory Information ......................24
8. Customer care and warranty ...........30
8.1 Philips’FlatPanelMonitorsPixel
DefectPolicy..................................................30
8.2 CustomerCare&Warranty.................32
9. Troubleshooting & FAQs ...................35
9.1 Troubleshooting...........................................35
9.2 SmartControlLiteFAQs.........................36
9.3 GeneralFAQs...............................................37
1
1. Important
1. Important
Thiselectronicuser’sguideisintendedfor
anyonewhousesthePhilipsmonitor.Taketime
toreadthisusermanualbeforeyouuseyour
monitor.Itcontainsimportantinformationand
notesregardingoperatingyourmonitor.
ThePhilipsguaranteeappliesprovidedthe
productishandledproperlyforitsintendeduse,
inaccordancewithitsoperatinginstructionsand
uponpresentationoftheoriginalinvoiceorcash
receipt,indicatingthedateofpurchase,dealer’s
nameandmodelandproductionnumberofthe
product.
1.1 Safety precautions and mainte-
nance
Warnings
Useofcontrols,adjustmentsorprocedures
otherthanthosespecifiedinthisdocumentation
mayresultinexposuretoshock,electrical
hazardsand/ormechanicalhazards.
Readandfollowtheseinstructionswhen
connectingandusingyourcomputermonitor.
Operation
•
PleaseKeepthemonitoroutofdirect
sunlight,verystrongbrightlightsand
awayfromanyotherheatsource.Lengthy
exposuretothistypeofenvironmentmay
resultindiscolorationanddamagetothe
monitor.
•
Removeanyobjectthatcouldfallinto
ventilationholesorpreventpropercooling
ofthemonitor’selectronics.
• Donotblocktheventilationholesonthe
cabinet.
•
Whenpositioningthemonitor,makesure
thepowerplugandoutletareeasilyac-
cessible.
•
Ifturningoffthemonitorbydetachingthe
powercableorDCpowercord,waitfor6
secondsbeforeattachingthepowercable
orDCpowercordfornormaloperation.
• Pleaseuseapprovedpowercordprovided
byPhilipsallthetime.Ifyourpowercord
ismissing,pleasecontactwithyourlocal
servicecenter.(PleaserefertoCustomer
CareConsumerInformationCenter)
• Donotsubjectthemonitortosevere
vibrationorhighimpactconditionsduring
operation.
•
Donotknockordropthemonitorduring
operationortransportation.
Maintenance
•
Toprotectyourmonitorfrompossible
damage,donotputexcessivepressureon
theLCDpanel.Whenmovingyourmoni-
tor,grasptheframetolift;donotliftthe
monitorbyplacingyourhandorfingerson
theLCDpanel.
• Unplugthemonitorifyouarenotgoingto
useitforanextensiveperiodoftime.
• Unplugthemonitorifyouneedtocleanit
withaslightlydampcloth.Thescreenmay
bewipedwithadryclothwhenthepower
isoff.However,neveruseorganicsolvent,
suchas,alcohol,orammonia-basedliquids
tocleanyourmonitor.
• Toavoidtheriskofshockorpermanent
damagetotheset,donotexposethe
monitortodust,rain,water,orexcessive
moistureenvironment.
• Ifyourmonitorgetswet,wipeitwithdry
clothassoonaspossible.
• Ifforeignsubstanceorwatergetsinyour
monitor,pleaseturnthepoweroffimmedi-
atelyanddisconnectthepowercord.Then,
removetheforeignsubstanceorwater,and
sendittothemaintenancecenter.
• Donotstoreorusethemonitorinloca-
tionsexposedtoheat,directsunlightor
extremecold.
• Inordertomaintainthebestperformance
ofyourmonitoranduseitforalongerlife-
time,pleaseusethemonitorinalocation
thatfallswithinthefollowingtemperature
andhumidityranges.
2
1. Important
• Temperature:0-4C32-95°F
• Humidity:20-80%RH
• IMPORTANT:Alwaysactivateamoving
screensaverprogramwhenyouleave
yourmonitorunattended.Alwaysactivate
aperiodicscreenrefreshapplication
ifyourmonitorwilldisplayunchanging
staticcontent.Uninterrupteddisplayof
stillorstaticimagesoveranextended
periodmaycause“burnin”,alsoknownas
“after-imaging”or“ghostimaging,onyour
screen.
"Burn-in","after-imaging",or"ghostimag-
ing"isawell-knownphenomenoninLCD
paneltechnology.Inmostcases,the
“burnedin”or“after-imaging”or“ghost
imaging”willdisappeargraduallyovera
periodoftimeafterthepowerhasbeen
switchedoff.
Warning
Severe”burn-in”or“after-image”or“ghost
image”symptomswillnotdisappearandcannot
berepaired.Thedamagementionedaboveis
notcoveredunderyourwarranty.
Service
•
Thecasingcovershouldbeopenedonly
byqualifiedservicepersonnel.
• Ifthereisanyneedforanydocumentfor
repairorintegration,pleasecontactwith
yourlocalservicecenter.(pleasereferto
thechapterof"ConsumerInformation
Center")
• Fortransportationinformation,please
referto"TechnicalSpecifications".
• Donotleaveyourmonitorinacar/trunk
underdirectsunlight.
Note
Consultaservicetechnicianifthemonitor
doesnotoperatenormally,oryouarenotsure
whatproceduretotakewhentheoperating
instructionsgiveninthismanualhavebeen
followed.
1.2 Notational Descriptions
Thefollowingsubsectionsdescribenotational
conventionsusedinthisdocument.
Notes, Cautions and Warnings
Throughoutthisguide,blocksoftextmaybe
accompaniedbyaniconandprintedinboldor
italictype.Theseblockscontainnotes,cautions
orwarnings.Theyareusedasfollows:
Note
Thisiconindicatesimportantinformationand
tipsthathelpyoumakebetteruseofyour
computersystem.
Caution
Thisiconindicatesinformationthattellsyou
howtoavoideitherpotentialdamageto
hardwareorlossofdata.
Warning
Thisiconindicatesthepotentialforbodilyharm
andtellsyouhowtoavoidtheproblem.
Somewarningsmayappearinalternateformats
andmaynotbeaccompaniedbyanicon.Insuch
cases,thespecificpresentationofthewarningis
mandatedbytherelevantregulatoryauthority.
3
1. Important
1.3 Disposal of product and packing
material
Waste Electrical and Electronic Equipment-
WEEE
Thismarkingontheproductoronits
packagingillustratesthat,underEuropean
Directive2002/96/ECgoverningusedelectrical
andelectronicappliances,thisproductmay
notbedisposedofwithnormalhousehold
waste.Youareresponsiblefordisposalof
thisequipmentthroughadesignatedwaste
electricalandelectronicequipmentcollection.
Todeterminethelocationsfordroppingoff
suchwasteelectricalandelectronic,contact
yourlocalgovernmentoffice,thewastedisposal
organizationthatservesyourhouseholdorthe
storeatwhichyoupurchasedtheproduct.
Yournewmonitorcontainsmaterialsthatcan
berecycledandreused.Specializedcompanies
canrecycleyourproducttoincreasethe
amountofreusablematerialsandtominimize
theamounttobedisposedof.
Allredundantpackingmaterialhasbeen
omitted.Wehavedoneourutmosttomakethe
packagingeasilyseparableintomonomaterials.
Pleasefindoutaboutthelocalregulationson
howtodisposeofyouroldmonitorandpacking
fromyoursalesrepresentative.
Recycling Information for Customers
Yourdisplayismanufacturedwithhighquality
materialsandcomponentswhichcanbe
recycledandreused.
Tolearnmoreaboutourrecyclingprogram
pleasevisitwww.philips.com/about/sustainability/
recycling.
4
2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Package contents
VGA
DVI (optional)
Audio cable (247E3LH)
Register your product and get support at
www.philips.com/welcome
247E3
Quick
Start
Install base stand
1. Placethemonitorfacedownonsoft
andsmoothsurfacetakingcaretoavoid
scratchingordamagingthescreen.
2. Holdthebasestandwithbothhandsand
firmlyinsertthebasestandintothebase
column.
(1)Gentlyattachthebasetothebase
columnuntilthelatchlocksthebase.
(2)Useyourfingerstotightenthescrew
locatedatthebottomofthebase,and
securethebasetothecolumntightly.
1
2
5
2. Setting up the monitor
Connecting to your PC
Model 247E3L:
4
ACpowerinput
VGAinput
DVI-Dinput
Kensingtonanti-theftlock
Model 247E3LH:
4
5
5
6
ACpowerinput
VGAinput
HDMIinput
Audioinput
Audiooutput
Kensingtonanti-theftlock
Model 247E3LPH:
4
4
5
ACpowerinput
VGAinput
HDMIinput
HDMIaudiooutput
Kensingtonanti-theftlock
Connect to PC
1. Connectthepowercordtothebackof
themonitorfirmly.
2. Turnoffyourcomputerandunplugits
powercable.
3. Connectthemonitorsignalcabletothe
videoconnectoronthebackofyour
computer.
4.
Plugthepowercordofyourcomputerand
yourmonitorintoanearbyoutlet.
5. Turnonyourcomputerandmonitor.Ifthe
monitordisplaysanimage,installationis
complete.
6
2. Setting up the monitor
2.2 Operating the monitor
Front view product description
Model 247E3L:
5
6 2347
Model 247E3L (1A model):
5
6 2347
Switchmonitor’spowerONand
OFF.
AccesstheOSDmenu
.
ReturntopreviousOSDlevel.
Changedisplayformat.
Adjustthebrightnesslevel.
AdjusttheOSDmenu.
Changethesignalinputsource.
Changedisplayformat.
SmartImageLite.Therearethree
modestobeselected:Standard,
InternetandGame.
Model 247E3LH:
5
6 2347
Switchmonitor’spowerONand
OFF.
AccesstheOSDmenu
.
ReturntopreviousOSDlevel.
Adjustthespeakervolume.
AdjusttheOSDmenu.
Changethesignalinputsource.
SmartImageLite.Therearethree
modestobeselected:Standard,
InternetandGame.
Model 247E3LPH:
5
6 2347
Switchmonitor’spowerONand
OFF.
AccesstheOSDmenu
.
ReturntopreviousOSDlevel.
Setthesensorlevelforbacklight
automaticcontrol.
AdjusttheOSDmenu.
Changethesignalinputsource.
SmartImageLite.Therearethree
modestobeselected:Standard,
InternetandGame.
7
2. Setting up the monitor
Description of the On Screen Display
What is On-Screen Display (OSD)?
On-ScreenDisplay(OSD)isafeatureinall
PhilipsLCDmonitors.Itallowsanenduserto
adjustscreenperformanceorselectfunctions
ofthemonitorsdirectlythroughanon-screen
instructionwindow.Auserfriendlyonscreen
displayinterfaceisshownasbelow:
Model 247E3L:






Model 247E3L (for 1A model):



 

 



 



Model 247E3LH:




 
 


Model 247E3LPH:





 

Basic and simple instruction on the control
keys
IntheOSDshownabove,youcanpress 
buttonsatthefrontbezelofthemonitor
tomovethecursor,andpressOKbuttonto
confirmthechoiceorchange.
8
2. Setting up the monitor
The OSD Menu
Belowisanoverallviewofthestructureof
theOn-ScreenDisplay.Youcanusethisasa
referencewhenyouwanttoworkyourway
aroundthedifferentadjustmentslateron.
Main menu Sub menu
Power Sensor
VGA
HDMI 1 (available for selective models)
HDMI 2 (available for selective models)
Picture
Wide Screen, 4:3
0~4
0~100
0~100
DVI (available for selective models)
Picture Format
Brightness
Contrast
SmartResponse
On, Off
Off, Fast, Faster, Fastest
SmartContrast
OSD Settings
0~100
0~100
Off, 1, 2, 3, 4
5s, 10s, 20s, 30s, 60s
Horizontal
Vertical
Transparency
OSD Time Out
Setup
0~100
On, Off
Yes, No
0~100
0~100
0~100
H. Position
Auto
V. Position
Phase
Clock
Resolution Notification
Reset
Information
Language
English Español, Français, Deutsch, Italiano,
Português,
Русский
简体中文,
Türkçe
On
Off
Color
6500K, 9300K
Red: 0~100
Green: 0~100
Blue: 0~100
Color Temperature
sRGB
User Define
Audio
0~100 (available for selective models)
On, Off
On, Off
Volume
Stand-Alone
Mute
0, 1, 2, 3, 4
On, Off (available for selective models)
Power LED
Over Scan
Input
(available for selective models)
Resolution notification
Thismonitorisdesignedforoptimal
performanceatitsnativeresolution,
1920×1080@60Hz.Whenthemonitoris
poweredonatadifferentresolution,analertis
displayedonscreen:Use1920×1080@60Hzfor
bestresults.
Displayofthenativeresolutionalertcanbe
switchedofffromSetupintheOSD(On
ScreenDisplay)menu.
Physical Function
Tilt
9
2. Setting up the monitor
2.3 Remove Base Stand
Remove the Base Stand
Beforeyoustartdisassemblingthemonitor
base,pleasefollowtheinstructionsbelowto
avoidanypossibledamageorinjury.
1. Placethemonitorfacedownonasmooth
surface,takingcaretoavoidscratchingor
damagingthescreen.
2. Detachthebasestandawayfromthebase
columnby:
(1)Useyourfingerstoloosenthescrew
locatedatthebottomofthebase.
(2)Gentlymoveup-and-downtorelease
thelatchthatlocksthebaseandpull
thebaseawayfromthebasecolumn.
2
1
10
3. Image Optimization
3. TheSmartImageLiteonscreendisplay
willremainonscreenfor5secondsor
youcanalsopressOKbuttontomake
confirmation.
4.
WhenSmartImageLiteisenabled,the
sRGBschemeisdisabledautomatically.To
usesRGByouneedtodisableSmartImage
Litewiththe buttonatthefrontbezel
ofyourmonitor.
Exceptusing keytoscrolldown,youcan
alsopress  buttonstochooseandpress
OKbuttontoconfirmselectionandclosethe
SmartImageLiteOSD.
Therearethreemodestobeselected:Standard,
Internet,Game.
Standard:Enhancestextanddampens
brightnesstoincreasereadabilityand
reduceeyestrain.Thismodesignificantly
enhancesreadabilityandproductivitywhen
you'reworkingwithspreadsheets,PDFfiles,
scannedarticlesorothergeneraloffice
applications.
Internet:Thisprofilecombinescolor
saturation,dynamiccontrastandsharpness
enhancementtodisplayphotosandother
imageswithoutstandingclarityinvibrant
colors-allwithoutartifactsandfaded
colors.
Game:Turnonoverdrivecircuitforbest
responsetime,reducejaggyedgesforfast
movingobjectsonscreen,enhancecontrast
ratioforbrightanddarkscheme,this
profiledeliversthebestgamingexperience
forgamers.
3. Image Optimization
3.1 SmartImage Lite
What is it?
SmartImageLiteprovidespresetsthat
optimizedisplayfordifferenttypesofcontent,
dynamicallyadjustingbrightness,contrast,color
andsharpnessinrealtime.Whetheryou're
workingwithtextapplications,displayingimages
orwatchingavideo,PhilipsSmartImageLite
deliversgreatoptimizedmonitorperformance.
Why do I need it?
Youwantamonitorthatdeliversoptimized
displayallyourfavoritetypesofcontent,
SmartImageLitesoftwaredynamicallyadjust
brightness,contrast,colorandsharpnessin
realtimetoenhanceyourmonitorviewing
experience.
How does it work?
SmartImageLiteisanexclusive,leadingedge
Philipstechnologythatanalyzesthecontent
displayedonyourscreen.Basedonascenario
youselect,SmartImageLitedynamically
enhancesthecontrast,colorsaturationand
sharpnessofimagestoenhancethecontents
beingdisplayed-allinrealtimewiththepress
ofasinglebutton.
How to enable SmartImage Lite?
1. Press tolaunchtheSmartImageLiteon
screendisplay;
2. Keeppressing totogglebetween
Standard,Internet,Game.
11
3. Image Optimization
Installation
•
Followtheinstructionandcompletethe
installation.
•
Youcanlaunchafterinstallationis
completed.
•
Ifyouwanttolaunchlater,youcaneither
clicktheshortcutondesktoportoolbar.
First launch -Wizard
•
Thefirsttimeafterinstallationof
SmartControlLite,itwillautomaticallygo
toWizardforfirsttimelaunch.
• Thewizardwillguideyouthrough
adjustmentyourmonitorperformancestep
bystep.
• YoucangotoPlug-inmenutolaunch
wizardlateronaswell.
• Youcanadjustmoreoptionswithout
wizardbyStandardpane.
3.2 SmartContrast
What is it?
Uniquetechnologythatdynamicallyanalyzes
displayedcontentandautomaticallyoptimizes
aLCDmonitor'scontrastratioformaximum
visualclarityandviewingenjoyment,stepping
upbacklightingforclearer,crisperandbrighter
imagesordimmingbacklightingforcleardisplay
ofimagesondarkbackgrounds.
Why do I need it?
Youwanttheverybestvisualclarityand
viewingcomfortforeverytypeofcontent.
SmartContrastdynamicallycontrolscontrast
andadjustsbacklightingforclear,crisp,bright
gamingandvideoimagesordisplaysclear,
readabletextforofficework.Byreducingyour
monitor'spowerconsumption,yousaveon
energycostsandextendthelifetimeofyour
monitor.
How does it work?
WhenyouactivateSmartContrast,itwillanalyse
thecontentyouaredisplayinginrealtimeto
adjustcolorsandcontrolbacklightintensity.This
functionwilldynamicallyenhancecontrastfora
greatentertainmentexperiencewhenviewing
videosorplayinggames.
3.3 Philips SmartControl Lite
ThenewSmartControlLitesoftwarebyPhillips
allowsyoutocontrolyourmonitorviaaneasy
touseon-screengraphicinterface.Complicated
adjustmentsareathingofthepastasthisuser
friendlysoftwareguidesyouthroughfine-
tuningresolution,Colorcalibration,Clock/Phase
adjustments,RGBWhitepointadjustment,etc.
Equippedwithlatesttechnologyincore
algorithmforfastprocessingandresponse,this
Windows7complianteyecatchinganimated
Iconbasedsoftwareisreadytoenhanceyour
experiencewithPhilipsmonitors!
12
3. Image Optimization
Start with Standard pane:
Adjust menu:
•
AdjustMenuallowyoutoadjustBrightness,
Contrast,Focus,PositionandResolution.
• Youcanfollowtheinstructionanddothe
adjustment.
• Cancelpromptsuserifyouwanttocancel
installation.
13
3. Image Optimization
Color menu:
• ColorMenuallowyoutoadjustRGB,
BlackLevel,WhitePoint,ColorCalibration,
andSmartImageLite(Pleasereferto
SmartImageLitesection).
• Youcanfollowtheinstructionanddothe
adjustment.
• Refertobelowtableforsub-menuitem
baseonyourinput.
• ExampleforColorCalibration:
1. "ShowMe"startscolorcalibrationtutorial.
2. Start-startsthe6-stepcolorcalibration
sequence.
3.
QuickViewloadsthebefore/afterimages.
4. ToreturntoColorhomepane,clickthe
Cancelbutton.
5. Enablecolorcalibration-bydefaultison.
Ifunchecked,doesnotallowforcolor
calibrationtohappen,dimesoutstartand
quickviewbuttons.
6. Musthavepatentinfoincalibrationscreen.
14
3. Image Optimization
First color Calibration Screen:
• Previousbuttonisdisableduntilthesecond
colorscreen.
• Nextgoestothesucceedingtarget
(6-targets).
• FinalnextgoesFile>Presetspane.
• CancelclosestheUIandreturnstothe
pluginpage.
SmartImage Lite
Allowsusertochangesettingforbetterdisplay
settingbasedoncontent.
WhenEntertainmentisset,SmartContrastand
SmartResponseareenabled.
Options>Preferences-Willonlybeactive
whenselectingPreferencesfromthedrop-
downOptionsmenu.Onanon-supported
displaycapableofDDC/CI,onlytheHelpand
Optionstabsareavailable.
• Displayscurrentpreferencesettings.
• Acheckedboxenablesthefeature.The
checkboxisatoggle.
• EnableContextMenuondesktopis
checked(On)bydefault.EnableContext
menudisplaysSmartControlLiteselections
forSelectPresetandTuneDisplayinthe
desktopright-clickcontextmenu.Disabled
removesSmartControlLitefromtheright
clickcontextmenu.
• EnableTaskTrayiconischecked(On)by
default.Enablecontextmenushowsthe
tasktraymenuforSmartControlLite.A
rightclickonthetasktrayicondisplaysthe
menuoptionsforHelp,TechnicalSupport,
CheckforUpgrade,About,andExit.When
Enabletasktraymenuisdisabled,thetask
trayiconwillonlydisplayEXIT.
• RunatStartupischecked(On)bydefault.
Whendisabled,SmartControlLitewillnot
launchatstartorbeinthetasktray.The
onlywaytolaunchSmartControlLiteis
eitherfromthedesktopshortcutorfrom
theprogramfile.Anypresetsettorun
atstartupwillnotloadwhenthisboxis
unchecked(Disabled).
• Enabletransparencymode(Windows7,
Vista,XP).Defaultis0%Opaque.
Options>Input-Willonlybeactivewhen
selectingInputfromthedrop-downOptions
15
3. Image Optimization
menu.Onanon-supporteddisplaycapableof
DDC/CI,onlytheHelpandOptionstabsare
available.AllotherSmartControlLitetabsare
notavailable.
• DisplaytheSourceinstructionpaneand
currentinputsourcesetting.
• Onsingleinputdisplays,thispanewillnot
bevisible.
Options>Audio-Willonlybeactivewhen
selectingAudiofromthedrop-downOptions
menu.
Onanon-supporteddisplaycapableofDDC/
CI,onlytheHelpandOptionstabsareavailable.
Help>User Manual-Willonlybeactivewhen
selectingUserManualfromthedrop-down
Helpmenu.Onanon-supporteddisplay
capableofDDC/CI,onlytheHelpandOptions
tabsareavailable.
Help>Version-Willonlybeactivewhen
selectingVersionfromthedrop-downHelp
menu.Onanon-supporteddisplaycapableof
DDC/CI,onlytheHelpandOptionstabsare
available.
16
3. Image Optimization
Context Sensitive menu
TheContextSensitivemenuisEnabledby
default.IfEnableContextMenuhasbeen
checkedintheOptions>Preferencespane,then
themenuwillbevisible.
The Context Menu has four entries:
•
SmartControlLite-Whenselectedthe
AboutScreenisdisplayed.
• SelectPreset-Providesahierarchical
menuofsavedpresetsforimmediateuse.
Acheckmarkshowsthecurrentlyselected
preset.FactoryPresetcanalsobecalled
fromthedropdownmenu.
• TuneDisplay-OpenstheSmartControl
Litecontrolpanel.
• SmartImageLite-Checkcurrentsettings,
Standard,Internet,Game.
Task Tray Menu Enabled
Thetasktraymenucanbedisplayedbyright-
clickingontheSmartControlLiteiconfromthe
tasktray.LeftClickwilllaunchtheapplication.
The task tray has five entries:
•
Help-AccesstoUserManualfile:Open
UserManualfileusingthedefaultbrowser
window.
• TechnicalSupport-displaysthetech
supportpage.
• CheckforUpdate-takestheusertoPDI
Landingandcheckstheuser’sversion
againstthemostcurrentavailable.
• About-Displaysdetailedreference
information:productversion,release
information,andproductname.
• Exit-CloseSmartControlLite.
TorunSmartControlLiteagaineitherselect
SmartControlLitefromProgrammenu,double-
clickthedesktopPCiconorrestartthesystem.
Task Tray Menu Disabled
WhentheTaskTrayisdisabledinthepreference
folder,onlytheEXITselectionisavailable.
TocompletelyremoveSmartControlLite
fromthetasktray,disableRunatStartupin
Options>Preferences.
17
4. PowerSensor
4. PowerSensor™
(Available for model 247E3LPH only)
PowerSensorisauniqueenvironmentallyfriendlytechnologyfromPhilipswhichenablesusertosave
upto80%ofpowerconsumption.InlinewithPhilip’sSenseandSimplicityPromise,thisuserfriendly
technologyworksforyourightoutoftheboxwithoutanyhardwareorsoftwareinstallation,and
withoutanyuserinterventioninthedefaultmode.
How does it work?
• PowerSensorworksonprincipleoftransmissionandreceptionofharmless“infrared”signalsin
ordertodetectuser-presence.
• Whentheuserisinfrontofthemonitorthemonitoroperatesnormally,atthepredetermined
settingsthattheuserhasset-i.e.Brightness,contrast,color,etc.
• Assumingthatthemonitorwassetto100%ofbrightnessforexample,whentheuserleaves
hisseatandisnolongerinfrontofthemonitor,themonitorautomaticallyreducesthepower
consumptiondownto80%.
User present in front User not present
Powerconsumptionasillustratedaboveisforreferencepurposeonly
Setting
Default settings
Atitsdefaultsetting,(Setting3),PowerSensorisdesignedtodetectthepresenceoftheuserlocated
between90and110cm(35.4and43.3inches)fromthedisplayandwithinfivedegreesleftorrightof
themonitor.
Custom settings
•
Ifyouprefertobeinapositionoutsidetheperimeterslistedabove,chooseahigherstrength
signalforoptimaldetectionefficiency:Thehigherthesetting,thestrongerthedetectionsignal.For
maximumPowerSensorefficiencyandproperdetection,pleasepositionyourselfdirectlyinfrontof
yourmonitor.
• Ifyouchoosetopositionyourselfmorethan110cmor43.3inchesfromthemonitorusethe
maximumdetectionsignalfordistancesupto130cmor51.2inches.(Setting4)
• Sincesomedarkcoloredclothingtendstoabsorbinfraredsignalsevenwhentheuseriswithin
100cmor40inchesofthedisplay,stepupsignalstrengthwhenwearingblackorotherdark
clothes.
18
4. PowerSensor
• Youcanreturntothedefaultmodeatanytime(Setting3).
Hot key Sensor distance
Power Sensor
3
How to adjust settings
IfPowerSensorisnotoperatingcorrectlyinsideoroutsidethedefaultrange,here’showtofine-tune
detection:
• PressthePowerSensorhotkey.
• Youwillfindthedefaultposition‘3’ontheadjustmentbar.
• AdjustthePowerSensordetectionadjustmenttoSetting4andpressOK.
• TestthenewsetuptoseeifPowerSensorproperlydetectsyouinyourcurrentposition.
Note
AmanuallyselectedPowerSensormodewillremainoperationalunlessanduntilitisreadjustedorthe
defaultmodeisrecalled.IfyoufindthatthePowerSensorisexcessivelysensitivetonearbymotionfor
somereason,pleaseadjusttoalowersignalstrength.
/