ኇᐠ֜ഥԒӤ࢜Ԋ၆ᇳ݂ਪ
Ceiling Mounted Projector Hanger Installation Manual
䊒䊨䉳䉢䉪䉺䊷ᄤๆ⌕ᑼ䊑䊤䉬䉾䊃ڥ䉍п䈔䊙䊆䊠䉝䊦
78P30250101A
ԃդኇᐠӤ࢜ھܻۡӤ࢜ҏᡝ
Install the hanger on the ceiling
ᄤๆ⌕ᑼ䊑䊤䉬䉾䊃䉕ᄤ䈮࿕ቯ䈜䉎
ᄤๆ⌕ᑼ䊑䊤䉬䉾䊃䉕ᄤ䈮࿕ቯ䈜䉎
ϐငԊ၆ԁޟኇᐠӤ࢜ඨΣӤ࢜ҏᡝ
պᒳ൛ઠϤޜ̅ϤޜΏᖇႧ
Fix Inflate Screw (Part H) onto the ceiling
䉟䊮䊐䊧䊷䊃䊶䊈䉳
䉟䊮䊐䊧䊷䊃䊶䊈䉳㩷
(Part H) 䉕ᄤ᧼䈮ข䉍ઃ䈔䉎䇯
䉕ᄤ᧼䈮ข䉍ઃ䈔䉎䇯
4
Њ!ϒ!ᚌ!ҙ Caution ٧!๎ Њ!ϒ!ᚌ!ҙ Caution ٧!๎
ᓗѻЊཆϵຣݙؖᑆݙ྆̅ψѤᚉ̫֗ڟϴ̟Ą
ቜ˼Њཆػڪቡ௩రڟ͎ʣʿۣۖ̅ᓗѻ˃ුи̅ٶອĄ
ͫЊཆػ̫ڟ̈ۆٖ-ᓗѻชଇڟᑓĄ
ቜ˼Њཆػए̅ᆡᐞĄ
ቜ˼Њཆػ઼ώڢĄ
Avoid any places with high temperature or humidity or subject to contact with water.
Do not install the product near the vents of air conditioners and avoid places where it
is dusty and fumy.
Only install on a horizontal ceiling and avoid slanted surfaces.
Do not install in places subject to vibrations and shocks.
Do not install in places subject to direct bright light, which may cause fatigue in the
eyes of users when viewing the display.
㜞᷷䇮ᄙḨ䇮䈲᳓䈱䈎䈎䉎႐ᚲ䉕ㆱ䈔䉎䇯
䉣䉝䉮䊮䈱ㅢ᳇ญઃㄭ䇮䈲၎䉇Ⴒ䈱䈅䉎႐ᚲ䉕ㆱ䈔䉎䇯
᳓ᐔ䈭ᄤ᧼䈮䈱䉂ข䉍ઃ䈔䇮ᢳ㕙䈻䈱ข䉍ઃ䈔䈲ㆱ䈔䉎䇯
ᝄേ䈶ⴣ᠄䉕ฃ䈔ᤃ䈇႐ᚲ䉕ㆱ䈔䉎䇯
ᒝ䈇⋥ᣣశ䈱ᒰ䈢䉎႐ᚲ䉕ㆱ䈔䉎䇯
7. Њཆढቜػӹᆇጠֺྱॼઊڟڪ-̾ሂ۳ڪॉڟĄ
Remember to maintain ample space around the projector to ensure good ventilation.
឵᳇䉕⦟䈒䈜䉎䈢䉄䇮䊒䊨䉳䉢䉪䉺䊷ㄝ䈮චಽ䉴䊕䊷䉴䉕⏕䈜䉎䇯
8. ߏʟЊϒ̅թ̥๎ʹവΡ-Њཆ܉-ᄯᐮޥ̈ۆٖڟൖ်̅Ꮅጅࠞʴؒڟኌ໋ѝ༊Ą
To ensure safety and avoid any accident, it is necessary to investigate the structure of
the ceiling and select an appropriate and durable location before installation.
ో䉕⏕䈚䇮ᅤ䈭䉎䉅ㆱ䈔䉎䈢䉄䇮ข䉍ઃ䈔೨䈮ᄤ᧼䈱᭴ㅧ䉕䉼䉢䉾䉪䈚䇮⠴ਭᕈ
䈱䈅䉎ㆡᒰ䈭ข䉍ઃ䈔႐ᚲ䉕ㆬ䈹䇯
9. ̈ۆٖᄯ̛ᆤӹᆇጠ̅Ϥޜᒂࡧු䋴ࡻ̾ʰ-̸ᄯሂ۳Фઊڟ઼ݙ؛֧ϴኪ̅֏ͺ
ʹʨڟएĄ
The ceiling should have load-carrying capability to sustain more than four times the total
weight of the projector and the hanger. Also make sure it has enough strength to
withstand earthquakes and other shocks.
ᄤ᧼䈲䊒䊨䉳䉢䉪䉺䊷䈫䊊䊮䉧䊷䈱✚㊀㊂䈱䋴એ䉕ᡰᜬ䈪䈐䇮䈧㔡䈶䈠䈱ઁ䈱
ᄖ䈎䉌䈱ᝄേ䈮⠴䈋䉎ᒝᐲ䉕⏕䈜䉎䈖䈫䈏ᔅⷐ䈪䈜䇯
1. ߏሂ۳Њϒ-ϵЊཆ܉-ቜϑཏኧΏЊཆჳقपծᎳЈ˱࣠-ӂൡ۳ІΏЊཆჳقप
ػЊϒڟϴ̟-̾ۯ̠ݣуĄ
To ensure safety, please read this manual carefully before installation and follow the
instructions herein. Store this manual in a secure place for future reference.
ో䈮䈍䈇䈇䈢䈣䈒䈢䉄䈮䉅䇮ข䉍ઃ䈔೨䈮ᧄ䊙䊆䊠䉝䊦䉕⦟䈒䈍⺒䉂䈮䈭䉍䇮䈖䈖䈮⸥タ
䈘䉏䈢ᚻ㗅䈮ᓥ䈏䈦䈩䈒䈣䈘䈇䇯ᧄ䊙䊆䊠䉝䊦䈲䇮䈇䈧䈪䉅ෳᾖ䈪䈐䉎䉋䈉䈮ᄢಾ䈮▤䈚䈩
䈒䈣䈘䈇䇯
2. ϰᎿჲڟЊཆ̅ጇѰ̟ٲؚఅЙڟ௩రຒ̅ʡࢷฌࣛ-Ώყఅ੦ઠӇϒ˚؛ጊؚࡊΡ
ڟߺᘰٲݡ௰ψĄ
The manufacturer shall not be responsible legally for any equipment damage or
personal injury caused by incorrect installation or operation not covered in this
manual.
ਇㆡಾ䈭ข䉍ઃ䈔䉇ᠲ䈮࿃䈜䉎ᯏེ䈱៊ኂ䈲ᕋᚒ䈮䈧䈇䈩䈲䇮䊜䊷䉦䊷䈲৻ಾ⽿
છ䉕⽶䈇䉁䈞䉖䇯
3. ΏϤޜ˞௩ࡎߏ࣠ؾЊཆ̅ض֣-࠷ϰʡߏؖ̈ഓԮࣛĈЃϴኪăᄶࡳČ-ؚఅЙ˞
௩రຒ̅ʡࢷฌࣛ-Ώყఅ੦ઠӇϒ˚؛ጊؚࡊΡڟߺᘰٲݡੰᖠĄ
The ceiling mount bracket is designed for installing and removing easily. The
manufacturer shall not be liable to the damage of equipment and personnel injuries
arising out of human factors, acts of gods, such as earthquake.
䈖䈱䊑䊤䉬䉾䊃䈲䇮ข䉍ઃ䈔䈫ข䉍ᄖ䈚䈏◲න䈮䈪䈐䉎䉋䈉䈮⸳⸘䈘䉏䈩䈇䉎䈢䉄䇮ੱὑ⊛䉁
䈢䈲㔡䈭䈬䈱⥄ὼἴኂ䈮䉋䈦䈩⊒↢䈚䈢⸳䈱⎕៊䈶ኻੱ்ኂ䈮䈧䈇䈩䇮ᧄ䊜䊷䉦䊷
䈲䇮ቢో䈮ᵷ↢䈚䈢㑐ㅪᴺᓞ⽿છ䉕⽶䈇䉁䈞䉖䇯
4. ЊཆӹᆇጠϤޜᄯΥટʡࢷઈїЊཆĄ
The projector hanger must be installed by professional personnel.
䊒䊨䉳䉢䉪䉺䊷䈱䊑䊤䉬䉾䊃ข䉍ઃ䈔䈲䇮ᔅ䈝ኾ㐷䈱ᬺ⠪䈏ข䉍ઃ䈔䈭䈔䉏䈳䈭䉍䉁䈞䉖䇯
5. ഒባЊཆؖਸ਼Ώ୰ܢ-э̍ᄯΥ2ʡઈї-̾ᓗѻԕࡧڟڐܢ૬༣అЙʡࢷؖڐܢ
ฌࣛĄ
At least two persons are needed to install or remove the product to avoid any hazard
caused by falling objects.
‛䈱⪭ਅ䈮䉋䉎ෂ㒾䉕ㆱ䈔䉎䈢䉄䇮ᯏེ䈱ข䉍ઃ䈔㪆ข䉍ᄖ䈚䈮䈲ዋ䈭䈒䈫䉅2ฬ䈏ᔅⷐ䈫䈭
䉍䉁䈜䇯
6. Њཆ܉ቜϑሂჯϤޜֺڟᑗ;
Please check carefully the areas around where the hanger is to be installed:
䊑䊤䉬䉾䊃䈱ข䉍ઃ䈔ㄝ䉕䉋䈒䉼䉢䉾䉪䈚䈩䈒䈣䈘䈇㪑
Њ!ϒ!ᚌ!ҙ Caution ٧!๎
10. ቜ˼ьїᝐԁψѤྭχ-˼պːকڟྭχ-࠷ФψѤੰᖠቜჄѱڟ༄ኛ
੦ᒒ൜Ą
Do not modify any accessory or use broken parts. Contact the local
distributors with any questions.
ㇱຠ䈱ᡷㅧ䉇៊்䈚䈢ㇱຠ䉕↪䈚䈭䈇䈖䈫䇯䈗⾰䈲䇮ᦨነ䈱ઍℂᐫ䈮䈍䈇
ว䉒䈞䈒䈣䈘䈇䇯
11. ᖇႧᒳ൛)˸˼̾྆˃ڟӯʨᖇ̿ᒳ൛-̾ѻఅЙᒳ൛ᔞؖᒳ̱ڟࣛ*Ą
Tighten all screws (do not exert force on any screw with excess torque to
avoid breaking the screw or damaging its thread).
䈜䈼䈩䈱䊈䉳䉕✦䉄䉎䋨䊈䉳䈲䉴䊧䉾䊄䈱៊்䉕ㆱ䈔䉎䈢䉄䇮ㆊᐲ䈱✦䉄ㆊ䈑䈮
ᵈᗧ䋩䇯
㪈㪉㪅㩷 ΏϤޜؚ̛ᆤӹᆇጠڟࡧුߏ15Kg. (33 lbs.)̾ʮĄ
The maximum weight of the ceiling projector that the hanger can support is
below 15Kg. (33 lbs.).
ᧄ䊑䊤䉬䉾䊃䈏ᡰᜬ䊒䊨䉳䉢䉪䉺䊷ᦨᄢᡰᜬ㊀㊂䋺15Kg. (33 lbs.)㩷એਅ䇯
13. Ώ૮ޜਸ਼ʟᙚ૮ӹᆇጠ-˚͑͟૮֏ͺڐχ-ծᙒʡࢷᙚ૮ϵΏϤޜʰĄ
Do not hang any other objects except the projector on this hanger. Hanging
on this hanger by any personnel is strictly prohibited.
ᧄ䊊䊮䉧䊷䈮䈲䊒䊨䉳䉢䉪䉺䊷䉕ษ䉍ਅ䈕䉎એᄖ䈲䇮䈠䈱ઁ䈱‛ຠ䉕ษ䉍ਅ䈕䈩䈲
䈭䉍䉁䈞䉖䇯䉁䈢ᬺຬ䈏ᧄ䊊䊮䉧䊷䈮ษ䉍ਅ䈏䉎䈱䈲෩䇯
14. ̠ݣਸ਼ӹᆇጠ̅Ϥޜढ-ϵ̈ۆٖॼʮᒳ൛̌̅ᒳृ-̸ϰೈպϵ̈
ۆٖॼʮдၒĄ
Drill holes and screws will be left on the ceiling once the projector and hanger
are removed. Stains may occur after extended use.
䊒䊨䉳䉢䉪䉺䊷䈶䊑䊤䉬䉾䊃䉕ข䉍ᄖ䈚䈢ᓟ䈲䇮ᄤ᧼䈮䊈䉳ሹ䈫䊈䉳䈏ᱷ䉍䉁䈜䇯
䉁䈢䇮㐳ᦼ↪ᓟ䈲ᄤ᧼䈮ᨴ䉂䈏ᱷ䉎႐ว䉅䈅䉍䉁䈜䇯
15. ࠷ФψѤନ̜ڌᚊ-ቜ̾࠼̜ჳقपߏ̺Ą
Please consult the English language manual for any dispute on the terms.
⻉᧦ઙ䈮䈍䈔䉎㗴䈮㑐䈚䈩䈲䇮⧷⺆ 䊙䊆䊠䉝䊦䉕䈗ෳᾖ䈒䈣䈘䈇䇯
ኇᐠ֜ഥԒӤ࢜
Ceiling Mounted Projector Hanger
䊒䊨䉳䉢䉪䉺䊷ᄤๆ⌕ᑼ䊑䊤䉬䉾䊃
䊒䊨䉳䉢䉪䉺䊷ᄤๆ⌕ᑼ䊑䊤䉬䉾䊃
ߝ࡙㩷㩷㪆㩷㩷
㩷㩷㪆㩷㩷
Length㩷㩷㪆㩷㩷
㩷㩷㪆㩷㩷
㐳䈘
㐳䈘
ΏϤޜశ഻ݙߏ116mm,
శߏ578mmĄ
Length of Hanger:
From 116mm up to 578mm.
ᧄ䊑䊤䉬䉾䊃䈱ᦨ⍴㐳䈘䈲㩷㩷㩷
116mm 䇮ᦨ㐳䈲578mm䇯
ͪૃ398mm֗578mmߏ͟ቡጌڟݙ
)Ԑ22.5mmʙि*Ą
Adjustable length: From 398mm to 578mm (spaced at every 22.5mm)
䈠䈱ᄖ㩷398mm 䈎䉌㩷578mm 䉁䈪䈲⺞ᢛน⢻䈭㐳䈘㩿22.5mm৻ᨓ㪀䈫䈜䉎䇯Ą
1
ҏӤ࢜ᎌҢጒ൜
Application Scope of the Hanger
ᧄ䊑䊤䉬䉾䊃䈱ㆡ↪▸࿐
ᧄ䊑䊤䉬䉾䊃䈱ㆡ↪▸࿐
ݙ̅ᅶݙϵ300mm (L) x 250mm (W)̾˱ڟ
ӹᆇጠϤ૮̌߱ኌЪጠႍĄ
This product is suitable for projectors with
hanging holes within a size of 300mm (L) x
250mm (W).
㐳䈘䈶䈏300mm (L) x 250mm (W)એ 䈱䊒䊨
䉳䉢䉪䉺䊷䈱ษ䉍ដ䈔ሹ䈮䈲⊝䈖䈱ᯏ⒳䉕ㆡ↪䇯
1
2
W
L
116
398
578
22.5
A B C
D e
gf
h i j
k l M
Arm --- 4 pcs
Screw with fixed washer for
projector housing --- 4 pcs
Nylon washer for
projector housing --- 8 pcs
Projector bracket --- 1 pcs Flat Washers --- 4 pcs
Nyllon nut (M6 type) Ceiling mount bracket --- 1 pcs
Inflate screw M6 L=50mm
Height adjust
outside pipe --- 1 pcs
Height adjust Inside pipe --- 1 pcs
Screw with spring washer
(M4 type) --- 7 pcs Carriage Bolt --- 3 pcs Button screw (M4 type) --- 1 pcs
ѓ၆ႭӇ
Enclosed parts and accessories
หᪿㇱຠ䈶䉝䉪䉶䉰䊥
หᪿㇱຠ䈶䉝䉪䉶䉰䊥
ᐌُ࡙㩷㩷㪆㩷㩷
㩷㩷㪆㩷㩷
Adjusting angle㩷㩷㪆㩷㩷
㩷㩷㪆㩷㩷
ⷺᐲ⺞ᢛ
ⷺᐲ⺞ᢛ
;͟͡ଋᕽ360䍽Ą
For turning 360䍽 degrees to left and right
Ꮐฝ㪊㪍㪇䍽ᣓ࿁น⢻䇯
̫!0!ܭڢชଇՏݙ;㫧10䍽 Ą
Horizontal / Vertical inclination angle: 㫧10䍽
᳓ᐔ㩷㪆㩷ု⋥ᢳⷺᐲ䋺㫧㪈㪇䍽䇯
ЪᒳΔ͟ૡ֙ӹᆇጠՏݙڟᖬႧݙĄ
The nut is used to control the tightness of
the projector angle.㩷
䈖䈱䊅䉾䊃㩷䈲䊒䊨䉳䉢䉪䉺䊷ⷺᐲ䈱✦ઃᐲ䉕
ᓮ䈪䈐䉎䇯
!!!!!!!!!
ᒳΔቡጌΥટʡࢷઈїĄ
The nut must be adjusted by a qualified person.
䊅䉾䊃⺞ᢛ䈲ኾ㐷ᬺ⠪䈏ၫⴕ䈱䈖䈫䇯
1
2
3
360°
ᒳΔ㩷/㩷Nut / 䊅䉾䊃
10°
10°
10°
10°
ᒵᐅձܚሯؑӤ࢜ޟߝ࡙
Select the desired suspension length
ᔅⷐ䈭䊑䊤䉬䉾䊃䈱㐳䈘䉕ㆬ䈹
ᔅⷐ䈭䊑䊤䉬䉾䊃䈱㐳䈘䉕ㆬ䈹㩷
࿋Ӥ࢜ߝ࡙࣏100mm ਢ
պᒳ൛(Part K)ઠː༄ЊཆЁ̛ޜڟӹᆇ
ጠĂᖇ־ػҜథВϤޜ(Part G) Ą
When the pipe is 100mm long
Fix the frame-mounted projector onto Ceiling
mount bracket (Part G) with Screw (Part K).
䊑䊤䉬䉾䊃䈱㐳䈘䈏
䊑䊤䉬䉾䊃䈱㐳䈘䈏㩷
100mm
䈱
ᤨ
䊈䉳㩷(Part K) 䉕↪䈚䈩䉦䊮䉼䊧䊋䊷ข䉍ઃ
䈔ᷣ䉂䈱䊒䊨䉳䉢䉪䉺䊷䉕ᄤๆ⌕ᑼ䊑䊤䉬䉾
䊃㩷(Part G) 䈮࿕ቯ䈜䉎䇯
࿋Ӥ࢜ߝ࡙࣏ 380mm оΰਢ
When the pipe is over 380mm long
䊑䊤䉬䉾䊃䈱㐳䈘䈏
䊑䊤䉬䉾䊃䈱㐳䈘䈏
380mm એ䈱ᤨ
એ䈱ᤨ
ϑઠʹࣈ്(Part I)ࣈʣҜథВϤޜ
(Part G)Ăϔպᒳ൛ޘ(Part L)ࠎ྆ʹࣈ
്Ăϔҁᒳ൛(Part K)ᖇ־ػʹࣈ്Ăశ
ݣպᒳ౾(Part F)ؚฉػᒳ൛ޘ(Part L)Ą
First insert the Height adjust outside pipe
(Part I) in the Ceiling mount bracket
(Part G), and then pass the Hexagon bolt
(Part L) through the Outer Sleeve and
tighten it with the Nyllon nut (Part F).
Lastly, secure the Outer Sleeve with the
Screw with Spring washer (Part K).
వ䈮ᄖ䉴䊥䊷䊑ౝ䈮䉝䉾䊌㩷(Part I) 䊷䊐䊧䊷
䊛㩷(Part G) 䉕⚵䉂ㄟ䉂䇮ᰴ䈮ᄖ䉴䊥䊷䊑䈮
ⷺᬀㄟ䊗䊦䊃㩷(Part L) 䉕ㅢ䈚䈩䊅䉾䊃㩷㩷㩷
(Part F) 䈪࿕ቯ䈚䇮ᦨᓟ䈮䊈䉳㩷(Part K) 䈪
ᄖ䉴䊥䊷䊑䈮࿕ቯ䈜䉎䇯
1
2
2-1
2-1
2-1
G
G
L
K
F
I
K
2
Ԋ၆ኇᐠ֜ഥԒӤ࢜؏
Ceiling-mounted Projector hanger installation steps
䊒䊨䉳䉢䉪䉺䊷ᄤๆ⌕ᑼ䊑䊤䉬䉾䊃䈱ข䉍ઃ䈔䉴䊁䉾䊒
䊒䊨䉳䉢䉪䉺䊷ᄤๆ⌕ᑼ䊑䊤䉬䉾䊃䈱ข䉍ઃ䈔䉴䊁䉾䊒
ሯӑኇᐠЛኤ࢜Ȃᚇھܻኇᐠ
㩷
Fix the support frame on the projector
వ䈝䊒䊨䉳䉢䉪䉺䊷ᡰᜬ䊐䊧䊷䊛䉕䊒䊨䉳䉢䉪䉺䊷䈮࿕ቯ䈜䉎
వ䈝䊒䊨䉳䉢䉪䉺䊷ᡰᜬ䊐䊧䊷䊛䉕䊒䊨䉳䉢䉪䉺䊷䈮࿕ቯ䈜䉎㩷
պᒳ൛(Part ̌)ઠᙚᒗ̛ޜ(Part A)ᖇ־ػӹ
ᆇጠϤ૮̌ĂЊཆढ࠷ᒳ൛̊Ă͟ઠͻᏸ̰
(Part C)Ⴤᒳ൛ʙਔᖇ־ػӹᆇጠϤ૮̌Ą
Lock the Arm bracket (Part A) in the projector
hanging hole. If the Screw with fixed washer for
projector housin (Part ̌) is too long, lock the
supplied Nylon Pad (Part C) into the hanging hole
together with the projector.
䊈䉳 (Part ̌) 䉕↪䈚䈩䉦䊮䉼䊧䊋䊷㩷(Part A) 䉕
䊒䊨䉳䉢䉪䉺䊷ษ䉍ដ䈔ሹ䈮࿕ቯ䇯ข䉍ઃ䈔ᤨ䈮䊈
䉳䈏㐳䈜䈑䉎ᤨ䈲䊅䉟䊨䊮䊪䉲䊞䊷㩷(Part C) 䉕䊈
䉳䈫䈮䊒䊨䉳䉢䉪䉺䊷ษ䉍ដ䈔ሹ䈮࿕ቯ䈜䉎䇯
ϑઠӹᆇጠ̛ᆤޜ( Part D)Ăع༊ػᙚᒗ̛ޜ!!!!
( Part A)ʰծቡጌᒳ൛ѝ༊Ăϔպ̰(Part E)
̅ᒳ౾(Part F)ᖇ־ػᒳ൛ʰĄ
Place projector bracket (Part D) to Arm bracket (Part A)
and then adjust the screws and then tighten the bolt with
the Flat Washer (Part E) and the Nyllon nut (Part F).
䊒䊨䉳䉢䉪䉺䊷䉰䊘䊷䊃 (Part D) 䉕䉦䊮䉼䊧䊋䊷䉰䊘䊷䊃 (Part A)㩷
䈻⟎䈐䇮䊈䉳䈱⟎䉕⺞ᢛ䈚䈩䈒䈣䈘䈇䇮ᰴ䈮䊪䉾䉲䊞 (Part E)
䈶䊅䉾䊃 (Part F)䉕䊈䉳䈮✦䉄ઃ䈔䉎䇯
ඝ;պڱ͟ьїቡጌᙚᒗ̛ޜڟ̟̌˱ؖʹĂծቡጌᙚ̛ࠧޜڟᒳ൛ѝ༊Ă̾ϫӹᆇጠ
̛ᆤޜڟ̌ѝĄ
Note: The user may adjust the rectangular hole on the arm holder to face inward or outward and
also adjust the bolt position on the arm holder to be in line with the position of the hole on the
projector bracke.
⸼䋺↪⠪䈲⥄ಽ䈪 ᜬ䈲䉍䈱㐳ᣇᒻሹ䉕ౝะ䈐ᚗ䈲ᄖะ䈐䈮⺞ᢛ䈚䇮 ᜬ䈲䉍䈱䊈䉳⟎䉕⺞ᢛ䈚
䈩䊒䊨䉳䉢䉪䉺䊷ᡰᜬ䊐䊧䊷䊛䈱ሹ⟎䈮ว䉒䈞䉎䇯
1
2
D
F
E
B
C
A
1
պᒳ൛(Part K)ઠ˱ࣈ႓(Part J)ᖇ־ػː
༄ЊཆЁ̛ޜڟӹᆇጠĄ
Fix Height adjust Inside pipe (Part J) onto
the frame-mounted projector with Screw
(Part K).
䊈䉳㩷(Part K) 䉕↪䈚䈩ౝ䊌䉟䊒㩷(Part J)
䉕䉦䊮䉼䊧䊋䊷ข䉍ઃ䈔ᷣ䉂䈱䊒䊨䉳䉢䉪䉺
䊷䈮࿕ቯ䈜䉎䇯
պڱ͟ቡጌӹᆇጠэኌ໋ݙĂϔҁ
ᒳृ(Part L)Ⴤᒳ౾(Part F)Ăઠ˱ࣈ႓־ס
ػʹࣈ႓˱Ą
The user can adjust the projector to the
desired height, and then fix the Inner
Sleeve in the Outer Sleeve with Carriage
Bolt (Part L) and Nyllon nut (Part F).
↪⠪䈲⥄り䈪䊒䊨䉳䉢䉪䉺䊷䉕ㆡᒰ䈭㜞䈘
䈮⺞ᢛ䈚䈢ᓟ䇮䊗䊦䊃㩷(Part L) 䈫䊅䉾䊃(Part
F) 䉕↪䈚䈩䇮ౝ䊌䉟䊒䉕ᄖ䊌䉟䊒ౝ䈮
࿕ቯ䈜䉎䇯
శݣϔઠᒳ൛(Part M)ᖇ־ػʹࣈ႓ʰĂպ
ʹࣈ႓Ⴤ˱ࣈ႓־סԁߏᗧסĄ
Finally, lock Button Screw (Part M) on the
Outer Sleeve, securing outer and inner
sleeves in place firmly.
ᦨᓟ䈮䊈䉳㩷(Part M) 䉕ᄖ䊌䉟䊒䈮࿕ቯ
䈚䈩䇮ᄖ䊌䉟䊒䈫ౝ䊌䉟䊒䉕䈚䈦䈎䉍࿕ቯ
䈘䈞䉎䇯
2-2
2-2
2-2
2-3
2-3
2-3
2-4
2-4
2-4
J
K
I
J
F
M
ھۡ֜ഥԒӤܻ࢜Ј߆ݖ
Install the hanger on the ceiling
ᄤๆ⌕ᑼ䊑䊤䉬䉾䊃䉕ᄤ䈮࿕ቯ䈜䉎
ᄤๆ⌕ᑼ䊑䊤䉬䉾䊃䉕ᄤ䈮࿕ቯ䈜䉎
ᖳ๛(Part H)წаޟ௶Ӗו
œ
Њཆϵ̈ۆٖढ٧๎፷൬ᒳ൛(Part H)
̰ڟϖӕĄ
ҁწаƖӤ࢜១ӇƖҁწаƖኆᙋწаƖᖳҔĄ
œ
Њཆढᐖϑሂჯ̈ۆٖڟႍᘸĂᎵጅኌ໋ڟ
ᒳ൛ĂΏχؚ͓ۣڟᒳ൛(Part H)Ă!!!!!!
ͫኌػ̫٫ᑓĄ
œ
Њཆϵ̣ቴڟ̈ۆٖФઊڟ઼ݙĂծ̸
ΥટʡࢷᎵጅኌ໋ڟᒳ൛Ą
Fix Inflate Screw (Part H) onto the ceiling
œ
Place the Inflate Screw (Part H) on the ceiling,
in the following order:
Washer Ɩ Iron Hanger Ɩ Washer Ɩ Spring Washer Ɩ Nut.
œ
Select screws that are suitable for each type of ceiling. The enclosed Inflate
Screw (Part H) are for installation on concrete walls only.
œ
In the case of installation on a wooden ceiling, make sure it is strong enough.
Do not install on decorated posts or plaster boards. Consult professional
personnel to select appropriate screws.
䉟䊮䊐䊧䊷䊃䊶䊈䉳
䉟䊮䊐䊧䊷䊃䊶䊈䉳㩷
(Part H) 䉕ᄤ᧼䈮ข䉍ઃ䈔䉎䇯
䉕ᄤ᧼䈮ข䉍ઃ䈔䉎䇯
œ
ᄤ᧼䈮ข䉍ઃ䈔䉎ᤨ䈲䉟䊮䊐䊧䊷䊃䊶䊈䉳㩷(Part H) 䊪䉾䉲䊞䊷䈱ឃ㗅ᐨ䈮ᵈᗧ
䈜䉎䇯
ᐔ䊪䉾䉲䊞䊷
ᐔ䊪䉾䉲䊞䊷㩷
Ɩࡉࠤ࠶࠻ㇱຠ
ࡉࠤ࠶࠻ㇱຠ㩷
Ɩᐔ䊪䉾䉲䊞
ᐔ䊪䉾䉲䊞㩷
Ɩ䉴䊒䊥䊮䉫䊶䊪䉾䉲䊞䊷
䉴䊒䊥䊮䉫䊶䊪䉾䉲䊞䊷㩷
Ɩ䊅䉾䊃䇯
䊅䉾䊃䇯
œ
ข䉍ઃ䈔ᤨ䈮ᄤ᧼䈱⒳㘃䉕⏕䈚ㆡᒰ䈭䊈䉳䉕ㆬ䉖䈪䈒䈣䈘䈇䇯ઃዻ䈱䊈䉳㩷㩷㩷㩷㩷㩷
(Part H)㩷䈲䉶䊜䊮䊃ოኾ↪䈪䈜䇯
œ
ᧁᄤ᧼䈮ข䉍ઃ䈔䉎႐ว䈲චಽ䈭ᒝᐲ䈏ᔅⷐ䈪䈜䇯䉁䈢ኾ㐷ᬺຬ䈏ㆡᒰ䈭
䊈䉳䉕ㆬ䈹䈖䈫䈏ᔅⷐ䈪䈜䇯
1
H
G
3
/
