E
F
G
I
H
A
B
C
i
D
R L
LR
1
2 3
Mounting instruction
Mounting cushion and covers
1. Seat cushion
• Mount the seat cushion straps in the belt fittings in the seat (A)
• Fasten the cushion at the top with two press studs (B) and at the bottom with vel-
cro around the foot support bar (C). Push the extra cushion, if any, to the rear (D)
2. Cover for back side
We recommend to tilt the seat backwards, for easy mounting of the back side cover
• Mount the cover beneath the seat with the two press studs (E)
• Mount the cover on the back with the two press studs (F)
• Mount the cover with the press strud (G)
3. Cover for adductor
• Remove the fingerscrew (H) before mounting the cover. Be aware that the foot
support becomes loose after removing the fingerscrew. Remount the fingerscrew
and fasten the foot support after mounting the cover.
• Mount the cover on the adductor, e.g. pull from below and upwards (I)
Any adjustments and addition of accessories must be placed and fitted correctly
and checked before every use.
i
