Vitek VTM-LED280-4K User manual

Vitek
Brand
Vitek
Model
VTM-LED280-4K
Category
TVs & monitors
Type
User manual

Vitek VTM-LED280-4K provides you with a professional-grade display designed for continuous use in security applications with a 50,000-hour panel life. It features a large 28” wide screen 4K LED display panel with dual HDMI v2.0 and dual DisplayPort v1.2 video inputs, allowing you to connect multiple devices simultaneously. The 4K resolution (3840 x 2160) delivers stunning image quality, while the 1000:1 contrast ratio and <5ms response time ensure sharp and fluid visuals. With its 170° horizontal viewing angle, you can enjoy a wide field of view without distortion.

Vitek VTM-LED280-4K provides you with a professional-grade display designed for continuous use in security applications with a 50,000-hour panel life. It features a large 28” wide screen 4K LED display panel with dual HDMI v2.0 and dual DisplayPort v1.2 video inputs, allowing you to connect multiple devices simultaneously. The 4K resolution (3840 x 2160) delivers stunning image quality, while the 1000:1 contrast ratio and <5ms response time ensure sharp and fluid visuals. With its 170° horizontal viewing angle, you can enjoy a wide field of view without distortion.

VITEK
VTM-LED280-4K
Transcendent 28” Professional
4K LED Monitor with HDMI and
DisplayPort Inputs
• 28” Wide Screen 4K LED Display Panel
• Dual HDMI v2.0 & Dual DisplayPort v1.2 Video Inputs with Stereo Audio Output
• 4K Resolution (3840 x 2160)
• Contrast Ratio of 1000:1
• <5ms Response time
• 170° Horizontal Viewing Angle
• Front Panel Controls
• 100mm VESA Standard Mounting
• Professional grade display designed for 24/7 continuous use in security
applications with 50,000 Hour Panel Life
• 3 Year Warranty
FEATURES
VTM-LED280-4K: Operation Manual
1
TABLE OF CONTENTS
1) SAFETY INFORMATION ............................................................................ 2
2) WHAT’S INCLUDED ................................................................................... 4
3) CONNECTIONS .......................................................................................... 4
4) BUTTON FUNCTIONS ................................................................................ 5
5) WALL MOUNTING ....................................................................................... 5
6) GETTING STARTED ................................................................................... 5
INITIAL SETUP ..................................................................................................... 5
PICTURE SET ...................................................................................................... 6
IMAGE .................................................................................................................. 7
COLOR TEMP ...................................................................................................... 8
OSD SETTING ..................................................................................................... 8
RESET .................................................................................................................. 9
MISC. .................................................................................................................... 9
7) TROUBLESHOTING ................................................................................. 11
8) SPECIFICATIONS ..................................................................................... 12
9) DIMENSIONS ............................................................................................ 13
VTM-LED280-4K: Operation Manual
2
1) SAFETY INFORMATION
• Read these instructions – All the safety and operating instructions should
be read before this product is operated.
• Keep these instructions – The safety and operating instructions should be
retained for future reference.
• Heed all warnings – All warnings on the appliance and in the operating
• instructions should be adhered to.
• Follow all instructions – All operating and usage instructions should be
followed.
• Do not use this equipment near water – The appliance should not be
used near water or moisture e.g. in a wet basement or near a swimming
pool.
• Clean only with a dry cloth. Do not use solvents or petroleum based
fluids.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, stoves or other
apparatus (including amplifiers) that produce heat.
• Do not tamper with the supplied plug. This plug is a BS1363 standard
plug.
• Protect the power cord from being walked on or pinched, particularly at
the plug and at the point where they exit from the appliance.
• Only use attachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer or sold with the apparatus. When a cart or stand is used,
use caution when moving it to avoid any injuries or damage from it
tipping over.
• Unplug the apparatus during lightning storms or when unused for long
periods of
• time.
• Refer all servicing to qualified personnel.
Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus or it has been exposed to rain or moisture, it does not operate
normally or has been dropped.
• Please keep the unit in a well-ventilated environment.
• The monitor should only be connected to a mains power supply as rated
on the back of the equipment.
• To prevent overload, do not share the same power supply socket with too
many other electronic components.
• Do not place any connecting wires where they may be stepped on or
tripped over.
• Do not place heavy items on the cable as this may cause damage.
• Hold the main plug, not the wires, when removing from a socket.
• Pull the plug out immediately and seek professional help if the main plug
or cable is damaged, liquid has spilt onto the set, if accidentally exposed
to water or moisture, if anything accidentally penetrates the ventilation
slots or if the set does not work normally.
VTM-LED280-4K: Operation Manual
1
TABLE OF CONTENTS
1) SAFETY INFORMATION ............................................................................ 2
2) WHAT’S INCLUDED ................................................................................... 4
3) CONNECTIONS .......................................................................................... 4
4) BUTTON FUNCTIONS ................................................................................ 5
5) WALL MOUNTING ....................................................................................... 5
6) GETTING STARTED ................................................................................... 5
INITIAL SETUP ..................................................................................................... 5
PICTURE SET ...................................................................................................... 6
IMAGE .................................................................................................................. 7
COLOR TEMP ...................................................................................................... 8
OSD SETTING ..................................................................................................... 8
RESET .................................................................................................................. 9
MISC. .................................................................................................................... 9
7) TROUBLESHOTING ................................................................................. 11
8) SPECIFICATIONS ..................................................................................... 12
9) DIMENSIONS ............................................................................................ 13
VTM-LED280-4K: Operation Manual
2
1) SAFETY INFORMATION
• Read these instructions – All the safety and operating instructions should
be read before this product is operated.
• Keep these instructions – The safety and operating instructions should be
retained for future reference.
• Heed all warnings – All warnings on the appliance and in the operating
• instructions should be adhered to.
• Follow all instructions – All operating and usage instructions should be
followed.
• Do not use this equipment near water – The appliance should not be
used near water or moisture e.g. in a wet basement or near a swimming
pool.
• Clean only with a dry cloth. Do not use solvents or petroleum based
fluids.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, stoves or other
apparatus (including amplifiers) that produce heat.
• Do not tamper with the supplied plug. This plug is a BS1363 standard
plug.
• Protect the power cord from being walked on or pinched, particularly at
the plug and at the point where they exit from the appliance.
• Only use attachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer or sold with the apparatus. When a cart or stand is used,
use caution when moving it to avoid any injuries or damage from it
tipping over.
• Unplug the apparatus during lightning storms or when unused for long
periods of
• time.
• Refer all servicing to qualified personnel.
Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus or it has been exposed to rain or moisture, it does not operate
normally or has been dropped.
• Please keep the unit in a well-ventilated environment.
• The monitor should only be connected to a mains power supply as rated
on the back of the equipment.
• To prevent overload, do not share the same power supply socket with too
many other electronic components.
• Do not place any connecting wires where they may be stepped on or
tripped over.
• Do not place heavy items on the cable as this may cause damage.
• Hold the main plug, not the wires, when removing from a socket.
• Pull the plug out immediately and seek professional help if the main plug
or cable is damaged, liquid has spilt onto the set, if accidentally exposed
to water or moisture, if anything accidentally penetrates the ventilation
slots or if the set does not work normally.
VTM-LED280-4K: Operation Manual
3
• Do not remove the safety covers. There are no user serviceable parts
inside. Trying to service the unit yourself is dangerous and may
invalidate the product’s warranty. Only qualified personnel should
service this apparatus.
• To avoid battery leakage, remove exhausted batteries from the remote
control when not in use for a long period.
• Do not block ventilation slots on the back cover. The monitor can be
placed in a cabinet but ensure at least 5cm (2”) clearance all around.
·Do not tap or shake the screen, this may damage internal components.
• WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. The apparatus shall not be exposed
to dripping or splashing and objects filled with liquids, such as vases,
shall not be placed on the apparatus.
• WARNING: The wall plug socket is used as a disconnection device and
should remain readily accessible.
• WARNING: The batteries shall not be exposed to excessive heat such
as direct sunlight or fire.
AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE
USER’S HEARING.
This warning sign is
to warn of
dangerous voltage
inside the
product.
CAUTION: To reduce the risk
of electric shock, DO NOT
remove the
cover (or back).
No user serviceable
parts
inside. Refer servicing to
qualified service personnel.
This warning sign is
to alert you of
important
instructions
accompanying the
product.
VTM-LED280-4K: Operation Manual
4
2) WHAT’S INCLUDED
User manual Power supply Power cable
HDMI
cable
IR
Remote
3) CONNECTIONS
DC input port: Connection for Monitor power
HDMI 1 port: This port is HDMI 2.0
HDMI 2 port: This port is HDMI 2.0
DP 1 This port Display Port 1.2
DP 2: This port Display Port 1.2
Audio Out: 1/8” Audio Output Port
VTM-LED280-4K: Operation Manual
3
• Do not remove the safety covers. There are no user serviceable parts
inside. Trying to service the unit yourself is dangerous and may
invalidate the product’s warranty. Only qualified personnel should
service this apparatus.
• To avoid battery leakage, remove exhausted batteries from the remote
control when not in use for a long period.
• Do not block ventilation slots on the back cover. The monitor can be
placed in a cabinet but ensure at least 5cm (2”) clearance all around.
·Do not tap or shake the screen, this may damage internal components.
• WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. The apparatus shall not be exposed
to dripping or splashing and objects filled with liquids, such as vases,
shall not be placed on the apparatus.
• WARNING: The wall plug socket is used as a disconnection device and
should remain readily accessible.
• WARNING: The batteries shall not be exposed to excessive heat such
as direct sunlight or fire.
AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE
USER’S HEARING.
CAUTION: To reduce the risk
of electric shock, DO NOT
remove the
cover (or back).
No user serviceable
parts
inside. Refer servicing to
qualified service personnel.
This warning sign is
to alert you of
important
instructions
accompanying the
product.
VTM-LED280-4K: Operation Manual
4
2) WHAT’S INCLUDED
User manual Power supply Power cable
HDMI
cable
IR
Remote
3) CONNECTIONS
DC input port: Connection for Monitor power
HDMI 1 port: This port is HDMI 2.0
HDMI 2 port: This port is HDMI 2.0
DP 1 This port Display Port 1.2
DP 2: This port Display Port 1.2
Audio Out: 1/8” Audio Output Port
VTM-LED280-4K: Operation Manual
5
4) BUTTON FUNCTIONS
1) SOURCE: Press this button to select the source or exit menu.
2) MENU: To enter menu setting page.
3) Press to move left in the OSD setting.
4)
Press to move right in the OSD setting
5) Press to move up in the OSD setting
6)
▼
Press to move down in the OSD setting
7) POWER: To turn monitor ON/OFF
5) WALL MOUNTING
● The monitor is provided with mounting holes for a VESA
approved Mount
(Mounting bracket not supplied)
● The VESA mounting pattern is:100x100mm and the size of the
screws are 4 x
M6 x 10 (not supplied)
● Do not use screws longer than specified or damage will
occur to the
internal components.
NOTE: As the monitor is heavy, please consult with a
professional wall mount installer to perform the installation.
6) GETTING STARTED
INITIAL SETUP
Connect the monitor to a power outlet.
1.
Press the POWER button on the monitor to turn it on(the
indicator light will turn blue)
2.
Connect the relevant cable to the corresponding source on
the monitor.
The input should be automatically detected.
3.
Press “Source” button to bring up the source menu. Use the
"▼" "▲" to
choose the preferred input source.
VTM-LED280-4K: Operation Manual
6
Select from:
DP1
DP2
HDMI 1
HDMI 2
PICTURE SET
BRIGHTNESS
Change image brightness, according to ambient light. Value “0-100”
Contrast: C hange contrast between white and black areas of the image.
Value “0-100”
ECO
Change the image settings among the following:” SRGB –ENERGY SAVE-STANDARD-
TEXT-MOVIE-GAME”.
DCR
Change the dynamic contrast of the picture “ ON, OFF”
VTM-LED280-4K: Operation Manual
5
4) BUTTON FUNCTIONS
1) SOURCE: Press this button to select the source or exit menu.
2) MENU: To enter menu setting page.
3) Press to move left in the OSD setting.
4)
Press to move right in the OSD setting
5) Press to move up in the OSD setting
6)
▼
Press to move down in the OSD setting
7) POWER: To turn monitor ON/OFF
5) WALL MOUNTING
● The monitor is provided with mounting holes for a VESA
approved Mount
(Mounting bracket not supplied)
● The VESA mounting pattern is:100x100mm and the size of the
screws are 4 x
M6 x 10 (not supplied)
● Do not use screws longer than specified or damage will
occur to the
internal components.
NOTE: As the monitor is heavy, please consult with a
professional wall mount installer to perform the installation.
6) GETTING STARTED
INITIAL SETUP
Connect the monitor to a power outlet.
1.
Press the POWER button on the monitor to turn it on(the
indicator light will turn blue)
2.
Connect the relevant cable to the corresponding source on
the monitor.
The input should be automatically detected.
3.
Press “Source” button to bring up the source menu. Use the
"▼" "▲" to
choose the preferred input source.
VTM-LED280-4K: Operation Manual
6
Select from:
DP1
DP2
HDMI 1
HDMI 2
PICTURE SET
BRIGHTNESS
Change image brightness, according to ambient light. Value “0-100”
Contrast: C hange contrast between white and black areas of the image.
Value “0-100”
ECO
Change the image settings among the following:” SRGB –ENERGY SAVE-STANDARD-
TEXT-MOVIE-GAME”.
DCR
Change the dynamic contrast of the picture “ ON, OFF”
VTM-LED280-4K: Operation Manual
7
IMAGE
H.
POSITION
Change horizontal position of the display image. Press “3” and “4” buttons to
horizontally move the image.
I.
POSITION
Change vertical position of the display image. Press “3” and “4” buttons to vertically
move the image.
CLOCK
Change CLOCK setting. Value “0-100”
PHASE
Reduce video distortion and instability.
ASPECT
Change the video format of the images among “ WIDE, 4:3 “.
VTM-LED280-4K: Operation Manual
8
COLOR TEMP
COLOR TEMP.
Change the color settings among the following: ”Warm – Cool – User”, in “ User”
option, you can select “ Red : 0-100, Green: 0-100, Blue : 0-100 “.
.
OSD SETTING
LANGUAGE
Select the desired language: “ENGLISH, FRENCH, TURKCE, ITALIANO, ESPANOL,
PORTUGUES, CHINESE, NEDERLANDS, JAPANESE, DEUTSCH, and POLSKI”.
OSD H. POS
Change the horizontal position of the OSD
OSD V. POS
Change the vertical position of the OSD
VTM-LED280-4K: Operation Manual
7
IMAGE
H.
POSITION
Change horizontal position of the display image. Press “3” and “4” buttons to
horizontally move the image.
I.
POSITION
Change vertical position of the display image. Press “3” and “4” buttons to vertically
move the image.
CLOCK
Change CLOCK setting. Value “0-100”
PHASE
Reduce video distortion and instability.
ASPECT
Change the video format of the images among “ WIDE, 4:3 “.
VTM-LED280-4K: Operation Manual
8
COLOR TEMP
COLOR TEMP.
Change the color settings among the following: ”Warm – Cool – User”, in “ User”
option, you can select “ Red : 0-100, Green: 0-100, Blue : 0-100 “.
.
OSD SETTING
LANGUAGE
Select the desired language: “ENGLISH, FRENCH, TURKCE, ITALIANO, ESPANOL,
PORTUGUES, CHINESE, NEDERLANDS, JAPANESE, DEUTSCH, and POLSKI”.
OSD H. POS
Change the horizontal position of the OSD
OSD V. POS
Change the vertical position of the OSD
VTM-LED280-4K: Operation Manual
9
OSD TIMER
Set the duration of the OSD, value “0-100”.
TRANSPARENCY
Set the transparency of the OSD, value “0-100”
RESET
IMAGE AUTO ADJUST
Auto adjust the image.
COLOR AUTO ADJUST
Auto adjust the image color.
RESET
Factory default the monitor
MISC.
VTM-LED280-4K: Operation Manual
10
SIGNAL SOURCE
Choose the signal source of the display “ HDMI1, HDMI2, DP1, DP2,
AUTO”.
VOLUME
Adjust the volume level
FREE SYNC
Set the free sync effect on or off to ensure the image display
VTM-LED280-4K: Operation Manual
9
OSD TIMER
Set the duration of the OSD, value “0-100”.
TRANSPARENCY
Set the transparency of the OSD, value “0-100”
RESET
IMAGE AUTO ADJUST
Auto adjust the image.
COLOR AUTO ADJUST
Auto adjust the image color.
RESET
Factory default the monitor
MISC.
VTM-LED280-4K: Operation Manual
10
SIGNAL SOURCE
Choose the signal source of the display “ HDMI1, HDMI2, DP1, DP2,
AUTO”.
VOLUME
Adjust the volume level
FREE SYNC
Set the free sync effect on or off to ensure the image display
VTM-LED280-4K: Operation Manual
11
7) TROUBLESHOTING
Problem
Solution
No power
Insert the power plug securely into the power outlet.
No
picture
Ensure that the equipment is connected properly.
Ensure the correct input is selected.
Buttons on the monitor don’t do
anything
Disconnect the power plug and then reconnect it. (The unit may
not
be operating properly due to lightning, static, or other factors.)
Noise or other interference
Electronic equipment near the unit may be causing interference.
Relocate
the unit or move the equipment.
VTM-LED280-4K: Operation Manual
12
8) SPECIFICATIONS
VTM-LED280-4K: Operation Manual
11
7) TROUBLESHOTING
Problem
Solution
No power
Insert the power plug securely into the power outlet.
No picture
Ensure that the equipment is connected properly.
Ensure the correct input is selected.
Buttons on the monitor don’t do
anything
Disconnect the power plug and then reconnect it. (The unit may
not be operating properly due to lightning, static, or other factors.)
Noise or other interference
Electronic equipment near the unit may be causing interference.
Relocate the unit or move the equipment.
VTM-LED280-4K: Operation Manual
12
8) SPECIFICATIONS
(888) VITEK-70 | WWW.VITEKCCTV.COM
28492 Constellation Road Valencia, CA 91355
Preliminary Specifications:
VTM-LED280-4K
Transcendent 28” Professional 4K LED
Monitor with HDMI and DisplayPort Inputs
100mm
100mm
26.10”
15.39”
17.83”
2.44”
10.24”
6.69”
1.77”
2.17”
0.79”
Panel Type
Resolution
Contrast Ratio
Brightness
Response Time
Video Interface
Audio Interface
Viewing Angle
Frequency
Adjustable Color Temperature
Video Compatibility
Aspect Ratio
Speaker Multimedia Speakers
Sound Demodulation
Operating Humidity
Operating Temperature
Certification
VESA Mount
POWER Voltage
Power Consumption
Dimensions (w/Stand)
28’’ (16:9) 4K LED Backlit Monitor
3840(H) x 2160(V) @ 60 Hz (4K)
1000:1 Typical
300 cd/m²
5ms(G2G)
HDMI v2.0 x 2 / Display Port v1.2 x 2
Audio Out x 1,
U/D: 85° / 85°, L /R: 80° / 80°
30-145KHz(H) / 50-130Hz(V)
WARM / COOL / USER
NTSC / PAL
16:9
Right x 1 Left x 1, 2X5W
Stereo. Audio
20 % - 70 %
- 10 to 50 °C
CE / FCC / ROHS
100mm x 100mm
DC 12V 5A
≤45W
26.10” x 17.83” x 6.69”
VTM-LED280-4K Specifications
VTM-LED280-4K: Operation Manual
13
9) DIMENSIONS
100mm
100mm
26.10”
15.39”
17.83”
2.44”
10.24”
6.69”
1.77”
2.17”
0.79”
VTM-LED280-4K: Operation Manual
14
VTM-LED280-4K: Operation Manual
14
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
Version 1.0
February 2018
VITEK LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. Digital recording and storage products
are also warranted for 3 years except for the hard drives which carry their own independent fac-
tory warranty from the hard drive manufacturer. VITEK warrants to the purchaser that products
manufactured by VITEK are free of any rightful claim of infringement or the like, and when used
in the manner intended, will be free of defects in materials and workmanship for a period of three
(3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty
is non-transferable and extends only to the original buyer or end user customer of a Vitek Author-
ized Reseller.
This warranty shall not apply to repairs or replacements necessitated by any cause beyond
the control of VITEK, including but not limited to, acts of nature, improper installation, excess
moisture, misuse, lack of proper maintenance, accident, voltage fluctuations, or any unauthor-
ized tampering, repairs or modifications. This warranty becomes VOID in the event of alteration,
defacement, or removal of serial numbers.
Within the first 6 months of purchase, VITEK will replace or credit any defective product at the
request of the customer (subject to availability) with a new product that equals or exceeds the
performance of the original product purchased.
Within the first 6 months of purchase, at its sole discretion, VITEK may issue an advance replace-
ment for a defective product; however, all related costs including, but not limited to shipping and/
or delivery charges will be the responsibility of the customer. If upon return inspection a product
is determined to be in good working order or shows evidence of misuse, the customer will be re-
sponsible for full payment of the original product purchased as well as the replacement product.
Beyond the first 6 month period for the remainder of the warranty, VITEK’S responsibility shall be
limited to repairing the defective product, including all necessary parts and related labor costs.
At its sole discretion, VITEK may choose to either exchange a defective product or issue a mer-
chandise credit towards future product purchases. Any replacement parts furnished in connec-
tion with this warranty shall be warranted for a period not to exceed the remaining balance of the
original equipment warranty.
A Return Authorization number or “RA” number must be obtained prior to the return of any item
for repair, replacement, or credit. VITEK requires that this “RA” number be clearly printed on the
outside of the shipping carton to avoid refusal of said shipment. The Return Authorization number
expires after 30 days. Products returned after the 30 day period will be subject to refusal. Ship-
ping charges, if any, must be prepaid. A copy of the bill of sale (or invoice of purchase), together
with a complete written explanation of the problem must accompany all returns.
Vitek makes no warranty or guarantee whatsoever with respect to products sold or purchased
through unauthorized sales channels. Warranty support is available only if product is purchased
through a Vitek Authorized Reseller.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Vitek VTM-LED280-4K User manual

Vitek
Brand
Vitek
Model
VTM-LED280-4K
Category
TVs & monitors
Type
User manual

Vitek VTM-LED280-4K provides you with a professional-grade display designed for continuous use in security applications with a 50,000-hour panel life. It features a large 28” wide screen 4K LED display panel with dual HDMI v2.0 and dual DisplayPort v1.2 video inputs, allowing you to connect multiple devices simultaneously. The 4K resolution (3840 x 2160) delivers stunning image quality, while the 1000:1 contrast ratio and <5ms response time ensure sharp and fluid visuals. With its 170° horizontal viewing angle, you can enjoy a wide field of view without distortion.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents