Roland BNC-21 Owner's manual

Brand: Roland

Model: BNC-21

Type: Owner's manual

5100003190 1YZ

*5100003190- 01*

BNC-assembly_j.fm 1 ページ２００８年７月３０日　水曜日　午前１１時０分

permission of ROLAND CORPORATION.

5100003190 1YZ

*5100003190- 01*

Piano Bench Assembly Manual

Thank you for purchasing this piano bench.

Please read this manual carefully and assemble the bench as directed, performing each step in the order

given.

Checking the Included Items

No.

Part name Q’ty

Bench (seat)

Legs

Nuts

Spring washers

Wrench

Leg caps

Assembly Diagram

Place the bench seat upside down. Pass

the threaded portion of each leg bolt

through the bolt holes of the bench

seat, attach a spring washer and a nut

(in that order), and finger-tighten the

nut. Do this for each of the four legs.

* Tighten the nuts by hand when performing this

step; do not use the included wrench yet.

Place the bench upright. If one or two

legs are not in contact with the floor,

pull them down so that all four legs

contact the floor evenly.

* Perform this step in the location where you'll

be using the bench.

* If the floor is significantly uneven, perform the

assembly in a location that is flat.

Taking care not to touch the legs, place

the bench upside down once more, and

use the wrench to tighten the bolts until

there is no gap between the spring

washer and bolt.

If desired, attach the included leg caps.

If the height of the bench is adjustable, turn the

knob to adjust the height appropriately for the

person who will be playing the piano.

Assembly Procedure

Adjusting the Height

BNC-assembly_e.fm 1 ページ２００８年７月３０日　水曜日　午前１１時１分

Roland BNC-21 Owner's manual

Brand: Roland

Model: BNC-21

Type: Owner's manual

Download PDF

report

in other languages

日本語: Roland BNC-21 取扱説明書

Roland BNC-21 Owner's manual

Roland BNC-21 Owner's manual

in other languages

Related papers

Other documents