ESAB LTG 400 is a thyristor-controlled welding rectifier intended solely for TIG welding and welding with coated electrodes. It is suitable for both industrial and private use. Some of the features include: -Slope-up and slope-down which can be set between 0.1 and 15 seconds -Post-gas flow that can be set between 1 to 25 seconds -IP21 enclosure which means it is intended for indoor use
ESAB LTG 400 is a thyristor-controlled welding rectifier intended solely for TIG welding and welding with coated electrodes. It is suitable for both industrial and private use. Some of the features include: -Slope-up and slope-down which can be set between 0.1 and 15 seconds -Post-gas flow that can be set between 1 to 25 seconds -IP21 enclosure which means it is intended for indoor use
ESAB LTG 400 is a thyristor-controlled welding rectifier intended solely for TIG welding and welding with coated electrodes. It is suitable for both industrial and private use. Some of the features include: -Slope-up and slope-down which can be set between 0.1 and 15 seconds -Post-gas flow that can be set between 1 to 25 seconds -IP21 enclosure which means it is intended for indoor use
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI