Duerkopp Adler 867 User manual

Brand
Duerkopp Adler
Model
867
Category
Car kits
Type
User manual

This manual is also suitable for

867
Additional Instructions
Locking set for adjusting elements
All rights reserved.
Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents,
including extracts, is prohibited without the prior written approval of Dürkopp Adler AG.
Copyright © Dürkopp Adler AG 2017
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Table of Contents
Additional Instructions 867 - 01.0 - 03/2017 1
1 Components of the kit................................................................ 3
2 Fitting the kit ............................................................................... 4
2.1 Blocking of the needle thread tension .......................................... 4
2.2 Blocking of the sewing foot pressure adjusting wheel .................. 4
2.3 Blocking of the sewing foot stroke adjustment wheel ................... 5
2.4 Blocking of the stitch length adjusting wheel ................................ 6
Table of Contents
2 Additional Instructions 867 - 01.0 - 03/2017
Components of the kit
Additional Instructions 867 - 01.0 - 03/2017 3
1 Components of the kit
Check wether the scope of delivery for kit 0667 595204 is correct prior to
installing it.
Part number Quantity Description
0667 115680 1 Holder
0667 115690 1 Bushing
0667 135310 1 Bushing
0667 135320 1 Plate
0667 165620 1 Clamp
0667 315464 1 Socket/Adjusting wheel
9202 002107 1 Screw M4x20
9202 002117 1 Screw M4x25
9204 202067 1 Screw M5x35-H
Fitting the kit
4 Additional Instructions 867 - 01.0 - 03/2017
2 Fitting the kit
2.1 Blocking of the needle thread tension
Fig. 1: Blocking of the needle thread tension
1. Adjusting the needle thread tension ( Operating Instructions 867,
Adjusting the needle thread tension).
2. Fit the retaining plate (2).
3. Tighten the fastening screws (1).
2.2 Blocking of the sewing foot pressure adjusting wheel
Abb. 2: Blocking of the sewing foot pressure adjustment wheel
1. Turn the adjusting wheel for the sewing foot pressure (3)
(
Operating Instructions 867, Setting the sewing foot pressure).
(1) - Fastening screw (2) - Retaining plate
1234
+
–
+
+
–
+
–
–
+
–
+
–
+
–
②
①
(1) - Fastening screw
(2) - Retaining plate
(3) - Adjusting wheel for the sewing foot
pressure
①
②
③
Fitting the kit
Additional Instructions 867 - 01.0 - 03/2017 5
2. Fit the retaining plate (2).
3. Tighten the fastening screw (1).
2.3 Blocking of the sewing foot stroke adjustment wheel
Abb. 3: Blocking of the sewing foot stroke adjustment wheels (1)
1. Loosen arm cover ( Service Instructions 867).
2. Loosen screw (2) at the bottom of the arm cover.
3. Replace adjusting wheel (1).
4. Assemble worm (3) like shown in the picture (adjusting wheel at
position
1).
5. Tighten the adjusting wheel with screw (2).
6. Assemble arm cover ( Service Instructions 867).
Abb. 4: Blocking of the sewing foot stroke adjustment wheels (2)
(1) - Adjusting wheel
(2) - Screw
(3) - Worm
①
②
③
(4) - Fastening screws (5) - Adjusting wheels for the sewing foot
stroke
3
4
2
3
4
2
④
⑤
Fitting the kit
6 Additional Instructions 867 - 01.0 - 03/2017
7. Turn the adjusting wheel for the sewing foot stroke (2)
( Operating Instructions 867, Setting the sewing foot stroke).
8. Tighten the fastening screws (1).
2.4 Blocking of the stitch length adjusting wheel
Abb. 5: Blocking of the stitch length adjusting wheel (1)
1. Loosen Screws (2) from the inner side, then remove adjusting
wheel
(1).
Fig. 6: Blocking of the stitch length adjusting wheel (2)
WARNING
Risk of injury from moving parts!
Switch off the sewing machine before removing
blocking of the stitch length adjusting wheels.
(1) - Adjusting wheels for the stitch length (2) - Screw
0
1
2
4
3
5
6
7
8
9
1
0
1
1
1
2
0
1
2
4
3
5
6
7
8
9
1
0
11
12
MAX
MIN
①
②
(3) - Screw
(4) - Clamp
(5) - Screw
③
④
⑤
Fitting the kit
Additional Instructions 867 - 01.0 - 03/2017 7
2. Loosen screw (3).
3. Fix Clamp (4) with screw (5) to the adjusting wheel (1).
4. Assemble adjusting wheel (1) to the machine.
Abb. 7: Blocking of the stitch length adjusting wheel (3)
5. Turn the stitch length adjusting wheels (1)
(
Operating Instructions 867, Stitch length).
6. Insert a 3 mm hex key through the access holes (6) and tighten the
blocking screws for the stitch length adjusting wheels.
(1) - Adjusting wheels for the stitch length (6) - Access holes
0
1
2
4
3
5
6
7
8
9
1
0
1
1
1
2
0
1
2
4
3
5
6
7
8
9
1
0
11
12
MAX
MIN
⑥
①
Fitting the kit
8 Additional Instructions 867 - 01.0 - 03/2017
Subject to design changes - Part of the machines shown with additional equipment - Printed in Germany
© Dürkopp Adler AG - Additional Instructions - 0791 867704 EN - 01.0 - 03/2017
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Duerkopp Adler 867 User manual

Brand
Duerkopp Adler
Model
867
Category
Car kits
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents