Program
Max.
T(°C)
Max.Load
(kg)
Total Water
Consumption
(lt)
Max.energy
(kwh)
Total
time
(min)
Number
of Rinse
1-COTTON 90°C 83
5
75 1,96 155 3
2-COTTON 60°C
PRW 57
5
74 0,89 140 3
3-COTTON 60°C 57
5
43 0,85 190 2
4-COTTON 40°C 40
5
45 0,82 180 2
5-ECO WASH 40 5 43 0,39 80 2
6-QUICK WASH 25
2,5
40 0,16 30 2
7-COTTON
COLD WIT
5
56 0,17 110 3
8-SYNTHETICS
60°C 55
3
45 0,95 84 2
9-SYNTHETICS
40°C 40
5
45 0,53 65 2
10-SYNTHETICS
COLD WIT
3
45 0,12 72 2
11-DELCATE
30'C 30
2
56 0,34 70 3
12-WOOL 30°C 29
2
52 0,29 73 3
13-RINSE WIT 41 0,04 28 3
14-SPIN - - 0,02 10 -
15-DRAIN - - 0,01 2 -
Temperature may vary depending on the heating time
Durations may vary according to wash load (weight and type), tap water, ambient temperature
and selected extra functions.
CONSUMPTION DATA
SELECT ANY DESIRED OPTION
In order to select an additional option:
Press once the additional option button you wish to select.
If the lamp above the option button stays on it means you
have selected the option you wished to select.
If the lamp above the option button is not turned on means
you cannot use that additional option for the wash
programme you selected.
“No spin” button
This program is recommended to be used for your sensitive
clothes on which no spinning should be done. By pressing
this function button, you can cancel the spinning process
which is included in the program.
“Cold Wash” button
When this button is pressed, your clothes are washed with
cold water. With this function, you can wash your slightly
dirty clothes using less energy and water.
PROGRAMME START
Start the selected programme by pressing the
“Start/Pause” button.
When the programme you selected starts its operation the
lamp above the “Start/Pause” button will light up.
When you wish to put the selected programme on pause
press the “Start/Pause” button once. Programme ready
light will light up. In order to restart the programme from the
point it was put on pause at you will have to press the
“Start/Pause” button once again.
PROGRAMME END
Your machine will stop automatically when the programme
you selected has finished.
The programme end light will light up.
Bring the programme knob to the STOP (Off /”O”) position.
D DETERGENTS, CLOSE THE DOOR AND SELECT THE
PROGRAMME
Add detergent as indicated on the front page and as described in your Instructions for Use.
Close the door and turn the programme knob to the desired programme.
When you turn the programme knob to the desired programme, “programme ready”
light will stay on.
Programme ready light will light up.