Check these 4 things to ensure compatibility:
Will My Saw Fit
the Bora
®
NGX
Saw Plate
™
?
Blade guard to edge of saw plate - width
must be between 2 ½ in. and 5 ¼ in.
Front of saw plate to back of blade guard -
max length 11 ¾ in. (no min. restrictions)
Front lip on saw plate - ideal
width > ¾ in. (space is needed
for clamps to lock in place)
Open space on motor side of
saw plate for two locking clamps
-
1
bora NGX Pro Saw Plate and Non-Chip Strip User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI