Convair CTH04 Owner's manual

Convair
Brand
Convair
Model
CTH04
Type
Owner's manual

This manual is also suitable for

Convair Tower Heater CTH04 is a versatile heating solution for your home. It provides spot heating, making it ideal for warming up specific areas of your house. With its adjustable thermostat, you can set the desired temperature for optimal comfort. The oscillation function ensures even heat distribution, while the timer allows you to program the heater to turn off automatically. Additionally, the heater is equipped with safety features such as overheating protection and a tip-over switch for peace of mind. Its user-friendly control panel and remote control make it easy to operate.

Convair Tower Heater CTH04 is a versatile heating solution for your home. It provides spot heating, making it ideal for warming up specific areas of your house. With its adjustable thermostat, you can set the desired temperature for optimal comfort. The oscillation function ensures even heat distribution, while the timer allows you to program the heater to turn off automatically. Additionally, the heater is equipped with safety features such as overheating protection and a tip-over switch for peace of mind. Its user-friendly control panel and remote control make it easy to operate.

OWNER’SINSTRUCTIONMANUAL
PORT ABLECERAMICF ANHEA TER
MODEL CTH04
1
SAFETY
Make sure that the heater never comes into
contact with water.
Never position the heater under a power
outlet.
Never turn the heater on if the lead is
damaged or if the heater's casing is
obviously damaged. In order to avoid a
hazard, the power cord must be replaced by
a licensed electrician or service agent.
Do not pull the heater along by the power
cord or place the cord near the hot air outlet.
Always uncoil the power cord completely.
Do not use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool. If the heater is to be used in
a bathroom, ensure that switches and other
controls cannot be touched by a person in
the bath or shower.
Always turn the heater off and unplug from
the power socket when not in use.
To avoid overheating problems the in-built
safety device will interrupt electricity if the
heating elements become too hot.
If this should happen:
• Take the plug out of the mains socket.
• Let the heater cool down for 10 minutes.
• Check that the heater is positioned
correctly.
• See that there is no dust or other
obstacles hindering the air flow.
• Clean the inlet & outlet grilles if necessary.
The heater is also equipped with a ‘tip-over’
switch, which will turn off power to the heater
elements if it should fall over.
SAFETY DEVICES
,
GENERAL SAFETY
Please read these instructions before using
the heater and keep for future reference.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction in using the appliance by a
person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance. Do not
poke anything through the ventilating slits.
Always use the heater in an upright position.
Stand it on a firm, solid, horizontal base (not
on thick pile carpets).
Leave nothing hanging above or in front of
the heater (e.g. clothes or fabrics). Be sure
that the air inlets and outlets on the heater
are uncovered otherwise it will overheat.
Clean these openings at regular intervals to
prevent airflow reduction (refer Maintenance
section).
Do not use this heater outdoors, or on wet
surfaces.
The heater outlet is hot when in use. To
avoid burns, keep bare skin away from the
outlets. Leave plenty of room around the
heater (at least 50 cm on top and round the
sides, 120 cm at the front).
Connect the heater to a single 230 V, 10A
socket only. Do not plug into double
adaptors or multi-outlet power boards.
WARNING: In order to avoid
overheating, do not cover the
heater.
ELECTRICAL SAFETY
1
2
OPERATION
COMPONENTLIST
A CONTROLPANEL
B POWERINDICATOR
C POWERBUTTON
D POWERSWITCH(BASE)
E AIROUTLET
F AIRINLET (REAR)
G AIRFILTER
H BASE
I REMOTECONTROL
J REMOTECONTROL HOLDER
SET TIMEMODE
HIGH
0.5
1
2
4
LOW
AUTO
POWER
MODE/SET TIME
OSC
UPDOWN
POWER
A
B
C
G
F
H
I
E
D
POWER
MODE
TEMP
SETTIME
OSC
-
+
J
TURNING THE POWER ON
• Insert the plug into the power outlet.
• Turn the power switch located on the
product base (item D) to ON. The heater will
“beep” and the red light on the control panel
will illuminate.
OPERATION
The Convair fan heater is excellent in
providing spot heating throughout your
home. It should not be considered as a
centralized heating unit for your whole
house.
Your heater’s controls are shown below.
MODE SET TIME
HIGH
0.5
1
2
4
LOW
AUTO
POWER
MODE/SET TIME
OSC
POWER
DOWN
-
UP
+
INLET AIR TEMP /
THERMOSTAT SETTING
TIMER
DISPLAY
OSCILLATE
CONTROL
POWERBUTTON
(PUSH “ON/OFF”)
TIMER& TEMPERATURE
ADJUST (ROTATEUP /DOWN)
POWER
INDICATOR
MODEOR
TIMER
MENU
MODEDISPLAY
1
POWER
MODE
TEMP
SETTIME
OSC
-
+
TEMPERATURE
ADJUST
(UP /DOWN)
TIMERCONTROL
OSCILLATE
CONTROL
MODECONTROL
POWER “ON/OFF”
2
OPERATION-MAINTENANCE
3
REMOTE CONTROL SETUP
• Remove the battery cover and install the
two “AAA” batteries supplied.
• When the heater’s power is on, the
remote control can be used to operate the
heater from up to 6m away.
To prevent accidental operation of the
heater, always turn the base power switch
(item D) to OFF when not in use.
Note: if there are two or more heaters within
this distance, both will be operated by the
same remote control.
• Turn the heater ON by pushing the
“POWER” button on the unit or the remote
control (see Fig 1 & 2). The inlet air
temperature will be displayed on the LED
display.
• Press the “MODE/SET TIME” button on
the unit or the “MODE” button on the remote
control to change between the different
modes:-
- HIGH: High heat + high fan setting, no
thermostat
- LOW: Low heat + low fan setting, no
thermostat
- AUTO: Thermostat control
• Set the MODE toAUTO
• Select the temperature setting you want
by using the knob on the unit or the “+” and “-”
buttons on the remote. You can select in the
range of 15°-35°C.
• When the inlet air temperature is below
the selected set temperature, the unit will
blow hot air. If the inlet air is above the set
temperature, the heat element will turn off
and the fan will continue to run.
HEATER FUNCTIONS
To use the thermostat:-
To use the TIMER function:-
• Hold the MODE/SET TIME button on the
heater control for 2 seconds or more. A
light will appear next to “0.5” on the timer
display. Alternatively, press the SET TIME
button on the remote.
• Rotate the “POWER” knob clockwise to
increase the set time by 0.5 hr increments.
Rotate it anti-clockwise to decrease.
Alternatively, press the SET TIME button on
the remote to increase by 0.5 hr increments.
• Leave at the desired time. The timer will
begin to count down and indicate the time
remaining on the timer display until the
heater turns itself off.
Press the “OSC” button on the control panel
or remote control to turn oscillation on. The
heater will swing from side to side in a 90°
arc. Press again to stop oscillating.
To maximise the efficiency of the heater,
clean the inlet and outlet grilles regularly.
• Unplug the heater from the mains power
supply before cleaning.
• Use a soft, damp cloth to wipe the
outside. Never use thinners or other strong
chemicals on the heater surfaces.
• Use a vacuum cleaner to remove dirt and
dust from the removable air inlet filter and
inlet and outlet grilles.
• Ensure the heater is dry before plugging
back into the mains power supply.
OSCILLATION FUNCTION
MAINTENANCE
Asthepolicyofthiscompanyisoneofcontinuousimprovement,allspecificationsaresubjecttochangewithoutnotice.
NOTES
4
Wasteelectricalproductsmustnotbedisposedofwithhouseholdwaste. This
productshouldbetakentoyourlocalrecyclingcentreforsafetreatment.
001296-002-C
convair.net.au
AU1112
Service
Australia1-300-650-399
seeleyinternational.com
ItisthepolicyofSeeleyInternationaltointroducecontinual
productimprovement. Accordingly,specificationsare
subjecttochangewithoutnotice.Pleaseconsultwithyour
dealertoconfirmthespecificationsofthemodelselected.
®
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Convair CTH04 Owner's manual

Convair
Brand
Convair
Model
CTH04
Type
Owner's manual
This manual is also suitable for

Convair Tower Heater CTH04 is a versatile heating solution for your home. It provides spot heating, making it ideal for warming up specific areas of your house. With its adjustable thermostat, you can set the desired temperature for optimal comfort. The oscillation function ensures even heat distribution, while the timer allows you to program the heater to turn off automatically. Additionally, the heater is equipped with safety features such as overheating protection and a tip-over switch for peace of mind. Its user-friendly control panel and remote control make it easy to operate.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents