Deltech Fitness DF908 User manual

Brand: Deltech Fitness

Model: DF908

Category: Fitness, gymnastics & weight training

Type: User manual

Deltech Fitness DF908

The Deltech Fitness DF908 Lat Pulldown Machine with 200 lb Weight Stack is a versatile piece of home gym equipment that allows you to perform a variety of exercises to strengthen your back, shoulders, and arms.

With its adjustable seat and multiple grip positions, the DF908 allows you to customize your workouts to target specific muscle groups. The 200 lb weight stack provides ample resistance for both beginners and experienced lifters.

Some of the exercises you can perform on the DF908 include:

Lat pulldowns
Seated rows
Triceps extensions
Bicep curls
Shoulder presses

Deltech Fitness DF908

Some of the exercises you can perform on the DF908 include:

Lat pulldowns
Seated rows
Triceps extensions
Bicep curls
Shoulder presses

DF908

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533

FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY

(888) 258-0533

The DF908 consists of the DF910 Lat

Machine and the DF935 Stack Kit

LAT PULLDOWN MACHINE

WITH 200 LB WEIGHT STACK

Assembly Manual

BOX CONTENTS

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533

REAR SUPPORT

QTY 1

FRONT SUPPORT

QTY 1

BOTTOM FRAME

QTY 1

REVOLVING CHROME

ROW BAR

QTY 1

LAT CABLE

QTY 2

FOOT PLATE

QTY 1

FOOT REST

QTY 1

LAT BAR

QTY 1

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533

BOX CONTENTS

SEAT SUPPORT

QTY 1

SEAT BRACKET

QTY 1

UPPER PULLEY

FRAME

QTY 1

SEAT PAD

QTY 1

REAR CROSSMEMBER

QTY 1

HOLD-DOWN SUPPORT

QTY 1

HOLD-DOWN

TUBE

ROLLER PAD

QTY 2

FLANGE

QTY 2

BOTTOM PULLEY

FRAME

QTY 1

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533

FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY

(888) 258-0533

HARDWARE

MUSHROOM CAP

QTY 2

4-1/2” PULLEY

QTY 3

3-1/2” PULLEY

QTY 3

PULLEY BUSHING

QTY 4

SNAP HOOK

QTY 6

CHAIN

QTY 2

M12 x 70MM BOLT

QTY 2

M10 x 45MM BOLT

QTY 4

M10 x 20MM BOLT

QTY 2

M10 x 70MM

FLAT HEAD BOLT

QTY 3

RUBBER SHOE

QTY 2

M12 x 65MM BOLT

QTY 2

M10 x 70MM BOLT

QTY 3

M10 x 65MM

CARRIAGE BOLT

QTY 9

HARDWARE

M10 LOCKNUT

QTY 19

M12 WASHER

QTY 8

M10 WASHER

QTY 20

I I

M12 LOCKNUT

QTY 4

(SEE INSET) ASSEMBLE THE 4 ½” PULLEY (U) INTO THE BOTTOM PULLEY FRAME

(R) USING THE M10 x 45MM BOLT (DD), M10 WASHERS (II), AND M10 LOCKNUT

(KK).

INSTALL TO BOTTOM FRAME (C) USING THE M10 x 65MM CARRIAGE BOLTS (GG),

M10 WASHERS (II), AND M10 LOCKNUTS (KK).

ATTACH THE REAT CROSSMEMBER (N) TO THE BOTTOM FRAME (C) USING THE

M12 x 70MM BOLTS (AA), M12 WASHERS (HH), AND M12 LOCKNUTS (JJ). INSTALL

THE RUBBER BOOTS (T) OVER THE ENDS OF THE CROSSMEMBER.

ATTACH THE FOOT PLATE (C2) AND FOOT REST (C1) TO THE BOTTOM FRAME (C)

USING M10 x 70 MM FLAT HEAD BOLTS (FF), M10 WASHERS (II), AND M10 LOCK-

NUTS (KK).

BOTTOM FRAME ASSEMBLY

TOOLS REQUIRED:

METRIC WRENCHES OR SOCKET SET

Some components may be pre-installed

from the factory

(NOTE: THE NUTS USED ON THIS

BENCH ARE LOCK NUTS, THIS MEANS

YOU MUST TIGHTEN THEM DOWN

PAST THE PLASTIC INSERT.)

I I

ATTACH THE SEAT PAD (H) TO THE SEAT BRACKET (I) USING THE M10 x 20MM

BOLTS (EE) AND M10 FLAT WASHERS (II). THEN SLIDE THE SEAT BRACKET (I)

INTO THE SEAT SUPPORT (J).

(WAIT TO COMPLETE THE FOLLOWING STEP UNTIL THE CABLES ARE INSTALLED)

INSTALL THE 4 ½” PULLEY (U) INTO THE SEAT SUPPORT TUBE (J) USING THE

M10 x 45MM BOLT (DD) , M10 WASHERS (II), AND M10 LOCK NUT (KK).

SEAT FRAME ASSEMBLY

I I

SLIDE THE HOLD-DOWN TUBE (L) INTO THE HOLD-DOWN SUPPORT (M) . LOCK

INTO PLACE WITH PULL-PIN.

SLIDE THE ROLLER PADS (P) OVER THE LEG PAD TUBE AND INSERT THE MUSH-

ROOM CAPS (S). TAP INTO PLACE WITH ARUBBER HAMMER.

LEG HOLD DOWN ASSEMBLY

FLOATING PULLEYASSEMBLY

ASSEMBLE THE FLOATING PULLEY ASSEMBLY BY USING 4-1/2” PULLEYS (U),

FLANGES (Q), M10 x 45MM BOLTS (DD), M10 WASHERS (II), AND M10 LOCKNUTS (KK).

I I

UPPER PULLEY FRAME ASSEMBLY

INSTALL THE FRONT 3-1/2” PULLY (V) USING THE M10 x 70MM BOLT (CC), PULLEY

BUSHINGS (W), AND M10 LOCKNUT (KK). REPEAT FOR REAR PULLEYS.

NEXT ASSEMBLE THE UPPER PULLEY FRAME ASSEMBLY ONTO THE FRONT AND

BACK SUPPORTS (A,B) USING THE M12 x 65MM BOLTS(BB), M12 WASHERS (HH), AND

M12 LOCKNUTS (JJ).

MAIN FRAME ASSEMBLY

LAY THE BOTTOM FRAMEASSEMBLY ON ITS SIDE. ATTACH THE MAIN FRAME

ASSEMBLY, THE LEG HOLDDOWN ASSEMBLY, AND THE SEAT FRAME ASSEMBLY

USING THE M10 x 65MM CARRIAGE BOLTS (GG), M10 WASHERS (II), AND M10

LOCKNUTS (KK).

FINALASSEMBLY

BOTTOM FRAME ASSY

MAIN FRAME ASSY

LEG HOLDDOWN ASSY

SEAT FRAME ASSY

I I

ASSEMBLY INSTRUCTIONS FOR

THE DF935 STACK KIT

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533

FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY

(888) 258-0533

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533

BOTTOM SUPPORT

QTY 1

UPPER PULLEY

FRAME

QTY 1

DF935 WEIGHT STACK

BOX CONTENTS

CHROME RODS

QTY 2

WEIGHT STACK

(19) 10 LB. PLATES

QTY 1

WEIGHT STACK

TOP PLATE

QTY 1

SELECTOR ROD

QTY 1

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533

FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY

(888) 258-0533

RUBBER SHOE

QTY 3

DF935 WEIGHT STACK

HARDWARE

M10 x 75MM BOLT

QTY 2

RUBBER DOUGHNUTS

QTY 2

M10 WASHER

QTY 4

M10 LOCKNUT

QTY 2

WEIGHT STACK

ADJUSTMENT PIN

QTY 1

M10 x 25MM BOLT

QTY 2

WEIGHT STACK

CABLE CONNECTOR

QTY 1

SPRING PIN

QTY 1

PULLEY

QTY 1

PULLEY BUSHING

QTY 2

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533

FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY

(888) 258-0533

RUBBER SHOE

QTY 3

DF935 WEIGHT STACK

HARDWARE

M10 x 75MM BOLT

QTY 2

RUBBER DOUGHNUTS

QTY 2

M10 WASHER

QTY 4

M10 LOCKNUT

QTY 2

WEIGHT STACK

ADJUSTMENT PIN

QTY 1

M10 x 25MM BOLT

QTY 2

WEIGHT STACK

CABLE CONNECTOR

QTY 1

SPRING PIN

QTY 1

PULLEY

QTY 1

PULLEY BUSHING

QTY 2

UPPER PULLEYASSEMBLY

INSTALL THE PULLEY (P) INTO THE UPPER PULLEY FRAME (B), USING M10 x

75MM BOLT (H), PULLEY BUSHINGS (Q), AND M10 LOCKNUT (J).

SCREW WEIGHT STACK CONNECTOR (N)

INTO TOP OF WEIGHT STACK ROD AND

TIGHTEN WITH WRENCH.

INSERT WEIGHT STACK ROD (E) INTO CENTER HOLE OF

TOP PLATE (F) ALIGNING TOP HOLE OF WEIGHT STACK

ROD WITH SPRING PIN HOLE. INSERT SPRING PIN (O)

AND TAP WITH HAMMER UNTIL FLUSH WITH SURFACE.

WEIGHT STACK ASSEMBLY

LOWER FRAME ASSEMBLY

INSTALL THE RUBBER CAPS (G) ONTO THE BOTTOM SUPPORT (B). ATTACH THE BOTTOM

SUPPORT (B) TO THE LAT MACHINE USING THE M10 x 75MM BOLTS (H), M10 WASHERS (I), AND

M10 LOCKNUTS (J).

I H

WEIGHT STACK ASSEMBLY

INSTALL THE RUBBER DOUGHNUTS (L) ONTO THE BOTTOM OF THE CHROME RODS (C) ,

LEAVING APPROXIMATELY 2” PROTRUDING. INSERT THE CHROME RODS INTO THE TWO

OUTER HOLES IN THE BOTTOM SUPPORT.

ASSEMBLE THE WEIGHT STACK (E) BY SLIDING EACH PLATE OVER THE CHROME RODS (C)

AND ON TO THE BOTTOM SUPPORT.

SLIDE THE SELECTOR ROD/TOP PLATE ASSEMBLY OVER THE CHROME RODS (C) AND

THROUGH THE WEIGHT STACK (E). INSERT THE WEIGHT STACK ADJUSTMENT PIN (K) INTO

THE WEIGHT STACK (E).

Page is loading ...

Deltech Fitness DF908 User manual

Brand: Deltech Fitness

Model: DF908

Category: Fitness, gymnastics & weight training

Type: User manual

Deltech Fitness DF908

Some of the exercises you can perform on the DF908 include:

Lat pulldowns
Seated rows
Triceps extensions
Bicep curls
Shoulder presses

Download PDF

report

Deltech Fitness DF908 User manual

Deltech Fitness DF908 User manual

Related papers

Other documents