As a user of the ResMed AirFit
™
P10 nasal pillows mask, you know how simple its Quickfit
™
elastic headgear is to fit and how easy it slips on and off, even at night in the dark.
It’s important to properly care for your AirFit P10’s Quickfit elastic headgear to maintain its benefits
until you’re eligible for a headgear replacement. For best performance, remember to clean your
headgear on a weekly basis, use warm water and mild soap and leave it to dry on a flat surface
out of direct sunlight. For complete cleaning instructions, see the AirFit P10 user guide.
Cleaning and maintaining
your AirFit P10 headgear
Distributed by ResMed Corp, 9001 Spectrum Center Boulevard, San Diego, CA 92123 USA +1 858 836 5000 or 1 800 424 0737 (toll free). See ResMed.com for other ResMed locations worldwide. AirFit and QuickFit are trademarks and/or
registered trademarks of the ResMed family of companies. Specifications may change without notice. © 2018 ResMed. 10110614/1 2018-01
Headgear don’ts
Performing any of these “headgear don’ts” may negatively affect the
longevity of your headgear. Should additional adjustments be needed for your
elastic headgear, clips can be found in every AirFit P10 package to ensure
you get the right fit and therapy. Remember to replace your mask and mask
components on a regular interval, especially if any damage is noticed.
Don’t overstretch Don’t hang Don’t place in direct sunlight
Don’t machine wash/dry Don’t use boiling water to clean
100C
212F
-
1
ResMed AirFit P10 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ResMed AirFit N20 for Her Size guide
-
ResMed AirFit F30 CPAP Full Face Mask User manual
-
ResMed AirFit N30 User manual
-
ResMed AirFit P10 User guide
-
-
-
ResMed P10 User manual
-
-
ResMed AirFit N10 User guide
-