JETRICH CANADA LTD: 3270 Orlando Dr, Mississauga, Ontario, L4V 1C6, CANADA
Thank you for purchasing the Chris & Chris Chef series kitchen work station.
With proper assembly, maintenance, and cleaning, your work station will give you many years of service.
NOTE: IF THERE ARE ANY PARTS MISSING; OR THERE IS SLIGHT
SHIPPING DAMAGE TO YOUR UNIT, DO NOT RETURN TO THE STORE.
PLEASE CONTACT OUR CUSTOMER SERVICE DEPT. FOR HELP, OR VISIT
OUR WEBSITE FOR FURTHER INFORMATION.
CUSTOMER SERVICE: TOLL FREE NUMBER: 1-800-569-4201
WEBSITE: www.aimcorpchas.com
TOOLS NEEDED: PHILIPS HEAD SCREW DRIVER
ASSEMBLY TIPS: JET1222 STADIUM WORK STATION
>Cover work surface with soft blanket so as not to damage the unit or your work surface.
Step 1 .
Lay top panel (A) upside down on stable surface.
Install legs (B) to top (A) with allen bolts (I) using allen wrench (J)
NOTE: Install allen bolts (I) per step 1 illustration as follows:
leg position 1: 3 bolts per illustration
leg position 2: 2 bolts per illustration
leg position 3: 2 bolts per illustration
leg position 4: 3 bolts per illustration
NOTE: Do not tighten bolts at this time.
Steps 2 Slide 3 “S” hooks (G) on each of the 3 Towel Bars (C).
Install the 3 Towel Bars (C) onto the base of legs (B) using the 10 allen bolts (I)
The holes in the Bar (C) will line up with the holes in the leg base (B) that were left open in step 1
NOTE: Do not tighten bolts at this time
Step 3 Attach top shelf (D) to the legs (B) Using bolts (I) Do not tighten at this time
Attach bottom shelf (D) to legs (B) Using allen bolts (I) Now you may tighten the shelf bolts
Now you may tighten the leg bolts. Be careful not to over-tighten
Install the 4 locking casters (H) to the end of legs (B) using wrench (K)
Step 4
Slide Chef pan (E) into brackets under top (A)
Trash bag holder (F) can be used instead of or at the same time as chef pan (E) by pulling a plastic trash
bag up through the middle of frame (F) and sliding into brackets under top (A)
CONGRATULATIONS
/
