Minka Lavery 4971-269 Operating instructions

Brand
Minka Lavery
Model
4971-269
Type
Operating instructions

Minka Lavery 4971-269 is a versatile and stylish light fixture that can be used in a variety of settings. With its adjustable chain, the fixture can be hung at a variety of heights to suit your needs. The fixture's open design allows for maximum light output, making it ideal for use in rooms with high ceilings or large windows. The fixture is also compatible with a variety of light bulbs, so you can customize the light output to your liking. Installation is relatively easy and can be completed in a few simple steps.

Minka Lavery 4971-269 is a versatile and stylish light fixture that can be used in a variety of settings. With its adjustable chain, the fixture can be hung at a variety of heights to suit your needs. The fixture's open design allows for maximum light output, making it ideal for use in rooms with high ceilings or large windows. The fixture is also compatible with a variety of light bulbs, so you can customize the light output to your liking. Installation is relatively easy and can be completed in a few simple steps.

INSTALLATION INSTRUCTIONS
Item#4971-269 (Rev. 03/13/2014)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig.1
Fig. 2
Fig.3
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker. If necessary, remove
the old fixture from the ceiling including the mounting hardware.
2. Carefully remove the new fixture from the carton and check that
all parts are included as shown in the illustration.
3. Screw the fixture loop into the nipple onto the fixture body (A)
until snug.
4. Place the cover (B), glass shade (C) and metal ring (D) over the
socket of the fixture body (A). Then secure with socket ring (E)
using the spanner (F) provided.
HANGING THE FIXTURE (Fig. 3)
5. Thread the nipple into the ceiling loop until snug.
6. Thread the other end of the nipple into the crossbar until snug.
Note: The length of the nipple into the crossbar may be
adjusted if necessary.
7. Place the lock washer and hex nut over the end of nipple
protruding through crossbar. Then thread the hex nut onto the
nipple until snug.
8. Take this crossbar assembly and mount it to the ceiling outlet
box using the mounting screws (Size: #8-32N*L0.5”). The side
of the crossbar marked “GND” must face out.
9. Use proper chain pliers to open one end link of the chain and
connect to the fixture loop. Then close the link.
10. By measuring, determine the desired hanging height and use
the chain pliers to remove and discard the excess chain.
11. Carefully lace the fixture wires through the chain.
12. Slip the lock collar and canopy over the chain and allow them
to rest on the fixture body.
13. Open the other end link of the chain and attach it to ceiling
loop and close the link.
14. Feed the fixture wires through the loop and nipple assembly
and pull tight.
CONNECTING THE WIRES (See Fig.2)
15. At this point, connect the electrical wires as shown in Fig. 2,
making sure that all wire connectors are secured. If your outlet
box has a ground wire (green or bare copper), connect the
fixture’s ground wire to it. Otherwise, connect the fixture’s
ground wire directly to the crossbar using the green screw
provided.
16. Tuck the wire connections neatly into the ceiling outlet box and
raise the canopy to the ceiling. Thread the lock collar to the
ceiling loop to secure the canopy against the ceiling.
COMPLETING THE INSTALLATION (Fig. 1)
17. Install the light bulb(s) (not included) in accordance with the
fixture’s specification. (DO NOT EXCEED THE MAXIMUM
WATTAGE RATING!) (NE PAS DEPASSER LA PUISSANCE
NOMINALE MAXIMALE!)
Your installation is now complete. Return power to the outlet box
and test the fixture.
Note: Illustration (Fig. 1) on this manual is for installation
purposes only. It may or may not be identical to the fixture
purchased.
Notice: It is important to use proper chain pliers (not included)
To OPEN and CLOSE the chain included with this fixture. Do not
open them with other tools that may twist or stress the chain
links. It is important to use proper chain pliers like the ones
shown in the diagram.
LA-2401E
Set# A-016
- Crossbar
- Ground Screw
- Mounting Screw*2
Chain# HCH2072-269
Canopy
Outlet Box
Mounting Screw
Nipple
Lock Collar
Crossbar
Hex Nut
Lock Washer
Loop
Wire
Chain
Ceiling Loop
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
E
D
C
B
A
LOOP
F
  • Page 1 1

Minka Lavery 4971-269 Operating instructions

Brand
Minka Lavery
Model
4971-269
Type
Operating instructions

Minka Lavery 4971-269 is a versatile and stylish light fixture that can be used in a variety of settings. With its adjustable chain, the fixture can be hung at a variety of heights to suit your needs. The fixture's open design allows for maximum light output, making it ideal for use in rooms with high ceilings or large windows. The fixture is also compatible with a variety of light bulbs, so you can customize the light output to your liking. Installation is relatively easy and can be completed in a few simple steps.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents