Feiss F2048/3GBZ Installation guide

Brand: Feiss

Model: F2048/3GBZ

Type: Installation guide

(E) 9/05

ASSEMB LY I NST R UCT I ONS FOR F2048/3

MUR R AY FEI SS

©M U R R AY FEI SS I MPORT LLC.

27 1/2"

(70 cm)

39 1/2

(100 cm)

51 1/2

(131 cm)

63 1/2

(160 cm)

75 1/2

(192 cm)

87 1/2

(222 cm)

Fixture wire

and Ground Wire

Fixture Plate

Small Hex Nut

Mounting Plate

Machine Screw

Canopy Loop

Fixture Loop

Adjustable Chain Link

Chain

Glass Shade

Counter Ring

Bulb (not included)

Fitter

Socket

IMPORTANT

TURN OFF THE POWER AT THE MAIN

FUSE OR CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION



Carefully unpack and identify all parts before

assembly. Bulbs are not included.

1. Attach Chains:

 A. Open adjustable chain links by turning small 

 round tube at one side. See fig. 1.

 B. Hook chain onto open adjustable chain link. 

 Then attach adjustable chain link onto loop located 

 at fixture plate. Close adjustable chain link by 

 turning back small round tube.

 C. Repeat other side.

 D. At this point determine the desired length  of 

 chains to hang. Remove any unwanted chain links 

 by following fig. 2.

 E. Take bottom open link of chain and hook onto 

 fixture loop. Then close back link.

 F. Repeat other side.

 G. Hook fixture loops onto fixture curls.

2. Take ground wire (without plastic insulation) and 

 weave through above chain links. Then thread 

 through hole in fixture plate loop. Repeat with 

 fixture wires (with plastic insulation).

3. Follow enclosed “Multiple Standard Installation 

 Instructions” for electrical and fixture installation 

 onto ceiling outlet box.

4. Install shades onto fitters by fastening counter rings 

 onto threaded sockets.

5. Install bulbs (not included). See relamping label 

 located at socket area for type and maximum  

 allowed wattage.

Correct

Incorrect

Pull ends of

link to open.

recommend

use of chain

pliers, which

are designed

for this

purpose. (Not

included)

Twisting ends to

open chain may

cause links to

snap apart.

Do not open

chains this way.

Note: Chain

length should be

determined prior

to installation of

lighting fixture.

It is not

recommended to

adjust chain

height with

fixture attached.

Fig. 2

Fig. 1

Twist to open or close

chain link.

Adjustable Chain Link

Feiss F2048/3GBZ Installation guide

Feiss F2048/3GBZ Installation guide

Feiss F2048/3GBZ Installation guide

Related papers

Other documents