Westinghouse 7247200 User guide

Brand: Westinghouse

Model: 7247200

Type: User guide

Westinghouse 7247200 is a ceiling fan with a 52-inch blade span, ideal for medium to large rooms. It features a three-speed motor with a reversible airflow function, allowing you to customize the airflow direction for optimal comfort in both warm and cool weather. The fan comes with a convenient pull chain for easy speed and airflow direction adjustment. The durable construction and stylish design make it a perfect addition to any home décor.

ETL-ES-Wengue-WH10

OWNER'S MANUAL

MANUAL DEL USUARIO

Wengue

Please write model number here for future reference: /

Por favor, incluya el número del modelo aquí para futura referencia:

Net Weight: 10.27 LBS

Peso Neto: 4.66 KGS

Use and Care

Manual

ETL-ES-Wengue-WH10

Operation

Turn on the power and check operation of fan. The pull chain controls the fan speeds as follows: 1 pull - high; 2 pulls - medium; 3 pulls - low; 4 pulls - off.

Speed settings for warm or cool weather depend on factors such as room size, ceiling height, number of fans and so on. The slide switch controls direction, forward or reverse.

Warm weather/down position - (Forward) Fan turns counterclockwise direction. A downward air flow creates a cooling effect as shown in illustration A.

This allows you to set your air conditioner on a higher temperature setting without affecting your comfort.

Cool weather/up position - (Reverse) Fan turns clockwise direction. An upward airflow moves warm air off the ceiling area as shown in illustration B.

This allows you to set your heating unit on a lower setting without affecting your comfort. (Please however refer to point 10 in Safety Tips when operating in this position.)

NOTE: Turn off and wait for fan to stop before changing the setting of the forward/reverse slide switch.

Maintenance

1. Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year.

Make sure they are secure.

2. Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning.

This could damage the motor, or the wood, or possibly cause electrical shock.

3. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer coating to minimize discoloration or tarnishing.

4. There is no need to oil your fan. The motor has permanently lubricated bearings.

OPERATION AND MAINTENANCE

Page is loading ...