TC Electronic K-212 User guide

Type
User guide

This manual is also suitable for

K-115 / K-210 / K-212 / K-410 setup guide and overview
K-115 / K-210 / K-212 / K-410 setup guide and overview
Congratulations on the purchase of your
K-115, K-210, K-212 or K-410 speaker
cabinet(s)!
Although connecting and setting up K-Cabs is
easy and straightforward, we recommend rea-
ding this short setup guide completely before
you proceed. Enjoy!
Example setups
Two K- 410 s
horizontally stacked
The classic 8 x 10 from a
combination of two K-410s.
Snappy and crisp, with
plenty of muscle!
K-212 + K-410
horizontally stacked
A cool combination for
full low end, precision
and body.
Two K-210s
vertically stacked
Plenty of low end and power with the
precise, fast and defined tone usually
associated with 10“ speakers.
Two K-212s
vertically stacked
Get that full-bodied 4 x 12 tone from
a combination of two K212 cabinets.
Lots of low end, plenty of punch and
a clear and defined sound that never
compromises with your original tone.
For information about even more setups and
other TC Electronic bass products, please go to
http://tcelectronic.com/bass/
Safety first
For the safety of your fellow musicians and your
own, please ensure the stability of stacked cabi-
nets and take proper precautions to prevent the
stack from becoming unstable or tipping over.
Only two cabinets should be stacked vertically.
Speaker connections
The speakON connectors can be used both for
input and linking. Connect your amp’s output to
one of the connectors on the first cabinet and
link to a second cabinet using the other con-
nector.
The impedance for every cab model in this series
(K-115, K 210, K-212 and K-410) is 8 Ohm.
If you accidentally connect a non-valid combina-
tion of cabinets to a TC Electronic bass amplifier,
the amplifier’s protection mode may be invoked.
However, the amplifier will not be damaged.
Important safety instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Only use attachments/accessories specified
by the manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus com-
bination to avoid injury from tip-over.
Caution
You are cautioned that any change or modifi-
cations not expressly approved in this manual
could void your authority to operate this equip-
ment.
Service
There are no user-serviceable parts inside.
All service must be performed by qualified
personnel.
Getting support
TC Electronic Support:
tcelectronic.com/support/
Product manuals:
tcelectronic.com/support/manuals/
  • Page 1 1

TC Electronic K-212 User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI