Philips E3 Series User manual

Philips
Brand
Philips
Model
E3 Series
Type
User manual

This manual is also suitable for

Philips E3: Your Reliable Emergency Lighting Solution

The Philips E3 Series Emergency Lighting provides reliable illumination during power outages, ensuring safety and peace of mind. Its thermoplastic housing and high-performance electronics make it ideal for commercial and industrial applications.

With multiple lamp head options, the E3 Series offers flexible lighting solutions. Each lamp head features a high-performance parabolic reflector and a long-lasting tungsten lamp, allowing for maximum spacing between units.

The E3 Series boasts a robust construction with impact-resistant thermoplastic housing and universal J-box mounting. Its sealed lead calcium or nickel-cadmium battery provides a long service life and reliable operation in a wide range of temperatures.

Philips E3: Your Reliable Emergency Lighting Solution

The Philips E3 Series Emergency Lighting provides reliable illumination during power outages, ensuring safety and peace of mind. Its thermoplastic housing and high-performance electronics make it ideal for commercial and industrial applications.

With multiple lamp head options, the E3 Series offers flexible lighting solutions. Each lamp head features a high-performance parabolic reflector and a long-lasting tungsten lamp, allowing for maximum spacing between units.

The E3 Series boasts a robust construction with impact-resistant thermoplastic housing and universal J-box mounting. Its sealed lead calcium or nickel-cadmium battery provides a long service life and reliable operation in a wide range of temperatures.

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
E3 Series Emergency Lighting E3
Page 1 of 2 6 or 12 Volt 14 to 50 Watts Thermoplastic Housing
Lightolier is a Philips group brand
The E3 Series provides egress lighting in a wide variety of wattages. The thermoplastic housing and high performance electronics make the units ideal for commer-
5.0”
(12.7 cm)
13.0”
(33.0 cm)
Side
View
Front View
4.5”
(11.4 cm)
6.5”
(16.5 cm)
Features
1. Illumination: Allows up to three mounted lamp heads. The standard lamp
head incorporates a high performance parabolic reflector with a wedge base
tungsten lamp. Allows maximum spacing between units along a path of
egress.
2. Housing: Constructed of impact resistant, UL 94 V-0, 5VA white thermo-
plastic. Universal J-box mounting pattern, key hole slots or shelf mounting.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed lead calcium battery has an estimated
service life of 5 years, and an operating temperature range of 65°F (19°C) to
85°F (30°C). Maintenance free, sealed nickel cadmium battery has an esti-
mated service life of 10 years, and an operating temperature range of 20°F
(-7°C) to 95°F (35°C).
5. Input Power Requirements:
120 VAC - 0.18 amps (20 watts);
0.08 amps (20 watts)
Code Compliance
UL 924 listed, CUL listing for 30 minute operation.
Options
SD = Self-Diagnostics
SA = Self-Diagnostics with Alarm
SDTD = Self-Diagnostics with Time Delay
V = Voltmeter (not available with Ammeter (A) option)
1
A = Ammeter (not available with Voltmeter (V) option)
1
T1 = 120 VAC Time Delay (15 minutes)
T2 = 277 VAC Time Delay (15 minutes)
LCK1 = Line Cord (6’, 120 VAC field installed)
DL = UL Damp Location Listing
2
Options (continued)
F1 = 120 VAC Fuse
F2 = 277 VAC Fuse
P1 = 120 VAC Power Switch
P2 = 277 VAC Power Switch
DC = DC Power Switch
ST = Special Input Transformer (specify voltage and frequency)
HI = Lamp Heads Installed at Factory
Multiple option configurations may void UL listing. Consult factory for specifics.
Accessories
WG5 = Wire Guard
PCS1 = Polycarbonate Vandal Shield
MSSHELFW = White Mounting Shelf
How to Specify:
E3 W
SERIES BATTERY BATTERY/ # OF LAMP HOUSING
DC WATTAGE HEADS HEADS
COLOR
W = White
6V
S6 = 5.4W
S7 = 7.2W
S9 = 9W
12V
S9 = 9W
S12 = 12.5W
S18 = 18W
1 = One
2 = Two
3 = Three
Blank = No Heads
6V, Lead Cadmium
18L = 18W
2
25L = 25W
2
36L = 36W
2
50L = 50W
2
6V, Nickel Cadmium
14N = 14W
18N = 18W
25N = 25W
50N = 50W
12V, Lead Calcium
36L = 36W
2
50L = 50W
2
12V, Nickel Cadmium
25N = 25W
50N = 50W
1 = 6V
2 = 12V
E3 = Thermoplastic
Emergency Lighting
Unit
Complete Fixture consists of unit and two lamp heads. Select options and accessories below. For additional lamp heads, see RH Specification Sheet.
NOTES:
1) Not available for use with SD, SA and SDTD options.
2) Selected models are available with damp location option.
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0308
E3 Series Emergency Lighting E3
Page 2 of 2 6 or 12 Volt 14 to 50 Watts Thermoplastic Housing
Lightolier is a Philips group brand
Unit Battery Capacity
Warranty
Electronics: 3 years
Battery: 1 year full, 4 years pro-rata (lead calcium);
5 year full, 5 years pro-rata (nickel cadmium)
DC Suggested Watts to 87
1
⁄2
Voltage Unit Lamp Head of Rated Voltage*
1
1
⁄2 hrs. 2 hrs. 4 hrs. 8 hrs.
6 E3118L S9 18 13.5 7 —
E3125L S9 25 19 9.5 —
E3136L S9 36 27 14 7.2
E3150L S9 50 37.5 19 10
E3114N S9 14 10.5 5.5 —
E3118N S9 18 13.5 7 —
E3125N S9 25 19 9.5 —
E3150N S9 50 37.5 19 10
12 E3236L S9 36 27 14 7.2
E3250L S9 50 37.5 19 10
E3225N S9 25 19 9.5 —
* Per NEC Specifications
S7- 6 Volt, 7.2 Watt, Tungsten
Lamp Head Photometrics
S9- 6 Volt, 9 Watt, Tungsten
S9- 12 Volt, 9 Watt, Tungsten
50
40
30
20
10
0
10 5 0 5 10
left
feet
right
.1
.2
.3
.5
1
.1
.2
.3
.5
1
80
60
40
0
15 10
0
5 10
up feet
down
5
20
50
40
30
20
10
0
10 5 0 5 10
left
feet
right
.1
.2
.3
.5
1
60
40
20
0
10
5
0
5
10
up
feet
down
.1
.2
.3
.5
1
60
80
15
S6- 6 Volt, 5.4 Watt, Tungsten
25
20
15
10
5
0
5 3 0 3 5
.1
.2
.3
.5
1
50
40
30
20
10
0
5 50 10
up feet down
left
feet
right
.1
.2
.3
.5
1
50
40
30
20
10
0
10 5 0 5 10
left
feet
right
60
.1
.2
.3
.5
1
.1
.2
.3
.5
1
5
0
5
15
feet
down
10
15
up
80
40
20
0
60
S18- 12 Volt, 18 Watt, Tungsten
down
S12- 12 Volt, 12.5 Watt, Tungsten
50
40
30
20
10
0
10
5
0
5
10
left
feet
right
.1
.2
.3
.5
1
60
40
20
0
20 15
5
0
5
up
feet
80
.1
.2
.3
.5
1
10
10
50
40
30
20
10
0
10 5
0
5
15
left
feet
right
60
.1
.2
.3
.5
1
10
.1
.2
.3
.5
1
10
0
5
10
feet
down
15
up
90
30
0
60
5
  • Page 1 1
  • Page 2 2

Philips E3 Series User manual

Philips
Brand
Philips
Model
E3 Series
Type
User manual
This manual is also suitable for

Philips E3: Your Reliable Emergency Lighting Solution

The Philips E3 Series Emergency Lighting provides reliable illumination during power outages, ensuring safety and peace of mind. Its thermoplastic housing and high-performance electronics make it ideal for commercial and industrial applications.

With multiple lamp head options, the E3 Series offers flexible lighting solutions. Each lamp head features a high-performance parabolic reflector and a long-lasting tungsten lamp, allowing for maximum spacing between units.

The E3 Series boasts a robust construction with impact-resistant thermoplastic housing and universal J-box mounting. Its sealed lead calcium or nickel-cadmium battery provides a long service life and reliable operation in a wide range of temperatures.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents