General International 30-300 M1 is a heavy-duty planer, that can handle stock up to 8 inches (202 mm) thick and 20 inches (508 mm) wide, making it suitable for a variety of woodworking projects. It comes with a 5 HP motor that gives the cutterhead a speed of 5000 RPM and allows for a maximum depth of cut of 3/32 inches (2.3 mm). The table is made of cast iron and has two extension wings, each measuring 15 inches (380 mm) by 21 1/4 inches (538 mm), giving you a total surface area of 55 inches (1437 mm) by 20 inches (506 mm) to work with.
General International 30-300 M1 is a heavy-duty planer, that can handle stock up to 8 inches (202 mm) thick and 20 inches (508 mm) wide, making it suitable for a variety of woodworking projects. It comes with a 5 HP motor that gives the cutterhead a speed of 5000 RPM and allows for a maximum depth of cut of 3/32 inches (2.3 mm). The table is made of cast iron and has two extension wings, each measuring 15 inches (380 mm) by 21 1/4 inches (538 mm), giving you a total surface area of 55 inches (1437 mm) by 20 inches (506 mm) to work with.
General International 30-300 M1 is a heavy-duty planer, that can handle stock up to 8 inches (202 mm) thick and 20 inches (508 mm) wide, making it suitable for a variety of woodworking projects. It comes with a 5 HP motor that gives the cutterhead a speed of 5000 RPM and allows for a maximum depth of cut of 3/32 inches (2.3 mm). The table is made of cast iron and has two extension wings, each measuring 15 inches (380 mm) by 21 1/4 inches (538 mm), giving you a total surface area of 55 inches (1437 mm) by 20 inches (506 mm) to work with.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI