Crown RC 5500 Operating instructions

Crown
Brand
Crown
Model
RC 5500
Type
Operating instructions

Crown RC 5500 Below you will find brief product information for Crown RC 5500. The information provided is based on the capacity and load center section of the instruction manual.

Crown RC 5500 is a versatile forklift truck designed to handle a wide range of loads. Its capacity varies depending on the load center and lift height, which can be found on the capacity plate attached to the truck. It is important to use the correct units of measure (kg/mm or lb/in) when determining the capacity.

The load center refers to the distance from the load backrest or vertical face of the fork to the center of an evenly distributed load. The maximum load center for the Crown RC 5500 is 600mm (24 in).

Crown RC 5500 Below you will find brief product information for Crown RC 5500. The information provided is based on the capacity and load center section of the instruction manual.

Crown RC 5500 is a versatile forklift truck designed to handle a wide range of loads. Its capacity varies depending on the load center and lift height, which can be found on the capacity plate attached to the truck. It is important to use the correct units of measure (kg/mm or lb/in) when determining the capacity.

The load center refers to the distance from the load backrest or vertical face of the fork to the center of an evenly distributed load. The maximum load center for the Crown RC 5500 is 600mm (24 in).

Capacity & Load Center
11 Capacity & Load Center
Capacity & Load Center 12
625-B
this side up
start laminate on this line
load in die
5500
S E R I E S
Truck Weight with M ax. Battery
Units of measure, kg/mm
Capacit y with Mast Ve rtical
Capacit y
Attach ment Data
Serial Numb er
RC
600
(24)
(lb/in)
Truck Typ e
Center
Capacity & Load Center
WHAT IS YOUR TRUCK CAPACITY?
Capacity is the load (including pallet or
container) that can be lifted to a given height
at a given load center. See the capacity plate on
your truck. Make certain you use the correct units
of measure.
WHAT IS LOAD CENTER?
Load center is the distance from the load backrest
or vertical face of the fork to the center of an evenly
distributed load.
LOADS MUST BE EVENLY DISTRIBUTED
Your truck could tip over, in any direction, if a load
is shifted to the front or side of a pallet or container.
Load
Center
Center of evenly
distributed load
600mm
(24 in.)
Max
Capacity & Load Center 12
KNOW YOUR LOAD
Do not exceed the capacity shown on your truck's
capacity plate. Be careful when handling long, high or
wide loads. Do not handle unstable loads.
EXCEEDING TRUCK CAPACITY CAN CAUSE AN ACCIDENT
Know the capacity of your truck as shown on your
capacity plate. Make certain you use the correct units
of measure. Pay attention to:
• Weight of load
• Load center
• Lift height
HYDRAULIC OPERATIONS CAN AFFECT STABILITY
Capacities given on your capacity plate are for loads that
are centered and level. Be extra careful when tilting a
load. (This also applies to other accessories or
attachments your truck may have, such as sideshift, carton
clamp, push-pull, etc.)
CENTER THE LOAD
Your truck could tip over if a load is shifted to the front
or side of a pallet or container. Make sure your load is
evenly distributed and centered over the forks.
625-B
5500
S E R I E S
Truck Weight with Max. Battery
Units of measure,
kg/mm
Cap acit y with Ma st Vert ical
Cap acit y
Att achm ent Data
Ser ial Numb er
RC
600
(24)
(lb/in)
Truc k Typ e
Load
Center
11 Capacity & Load Center
Know the Hazards
625-B
5500
S E R I E S
Truck Weight with Max. Battery
Units of measure,
kg/mm
Capacity with Mast Vertical
Capacity
Attachment Data
Serial Number
RC
600
(24)
(lb/in)
Truck Type
Load
Center
?
?
107
47
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

Crown RC 5500 Operating instructions

Crown
Brand
Crown
Model
RC 5500
Type
Operating instructions

Crown RC 5500 Below you will find brief product information for Crown RC 5500. The information provided is based on the capacity and load center section of the instruction manual.

Crown RC 5500 is a versatile forklift truck designed to handle a wide range of loads. Its capacity varies depending on the load center and lift height, which can be found on the capacity plate attached to the truck. It is important to use the correct units of measure (kg/mm or lb/in) when determining the capacity.

The load center refers to the distance from the load backrest or vertical face of the fork to the center of an evenly distributed load. The maximum load center for the Crown RC 5500 is 600mm (24 in).

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents