Recommendation on storage
and handling of labels
To ensure proper handling of the labels, we recommend
to store them as follows:
Edition: 25.02.14
Storage
• Label rolls should be stored flat one upon the other.
• Do not expose the label rolls to direct sun light and heat radiati-
on
• Storage should be at a temperature of max. 20° Celsius and a
relative humidity of about 50 % to avoid adhesive bleed.
• Plastic labels with particularly easy-flowing adhesives should be
stored in a cool environment at a temperature of about 10° to
max. 18° Celsius, not condensing and packed in plastic bags.
• Leave shrink-wrapped label rolls packed in films until use.
Repack partly used rolls in plastic bags to avoid absorption of
humidity.
Handling
• Make sure to evenly lift the material when taking it out of the
transport packaging to avoid telescoping.
• Avoid additional „tensioning“ of the rolls to keep the tensile
preloading.
• Make sure you have a clean, grease- and oilfree adhesion sur-
face.
For further information please contact our technical advisers and
department for labels and ribbons. Or visit us on our website at
www.cab.de.
3
All specifications about delivery, design and technical data are given to the best of our current knowledge and are subject to change without
prior notice. For more information go to www.cab.de
cab-Produkttechnik
GmbH & Co KG
P.O. Box 1904 Wilhelm-Schickard-Str. 14
76007 Karlsruhe
/
Germany 76131 Karlsruhe
/
Germany
Phone +49 721 6626-0
Fax +49 721 6626-249
www.cab.de
-
1
CAB Labels Short Manual
- Type
- Short Manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
CAB A4+M User manual
-
CAB Demand module 5114, 5116 Operating instructions
-
CAB HS and VS User manual
-
CAB MACH1/MACH2 User manual
-
CAB EOS1/EOS4 Operating instructions
-
CAB Hermes+ User manual
-
-
-
-