Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
www.ohlins.com
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To find the latest information contact
your Öhlins distributor. Please
consult your Öhlins dealer if you
have any questions regarding the
contents in this document.
Shock Absorber for ATV KTM SX 450/505 Rear
KT 972
Mounting Instructions
Part No. Pcs.
Shock absorber KT 972 1
C-spanner 00710-02 1
Spring adapter 00543-05 2
Spring clip 00629-01 1
Öhlins Sticker 00197-01 2
Memo Notes Sticker 01180-01 1
Owner’s Manual ATV 07235-01 1
Before installing this product, check the
contents of the kit. If anything is missing, please
contact your nearest Öhlins dealer.
Kit Contents
Set-up Data
Adjustments
Please note that during storage and
transportation, especially at high ambient
temperature, some of the oil and grease used for
assembling may leak and stain the packaging.
This is in no way detrimental to the product,
wipe off the excessive oil/grease with a cloth.
Part no. KT972_1
Issued 2010-02-09
Spring Preload
Adjuster
Warning!
Before installing this product, read the Öhlins
Owner’s Manual. The shock absorber is an
important part of your vehicle and will affect the
stability.
Warning!
Before riding, always make sure that the
basic settings made by Öhlins are according
to recommended Set-up Data. Read about
adjustments and setting up in the Öhlins
Owner’s Manual before you make any
adjustments. Contact an Öhlins dealer if you
have any questions about setting up the shock
absorber.
Note!
No spring included in this kit! See spring
recommendation in this manual. Consult your
Öhlins dealer.
Low speed
compression
adjustment
High speed
compression
adjustment
Recommended Set-up
Rebound damping 20 clicks
Compression damping
Low speed 15 clicks
High speed 1 turn
Spring pre-load 3 mm
Shock absorber data
Shock absorber length 440 mm
Stroke 115 mm
Rebound
Adjuster
Free sag and Ride height
Free sag, front 60 ± 5 mm
2½ ± ¼ “
Free sag, rear 30 ± 5 mm
1 ¼ ± ¼ “
Ride height, front 80 ± 5 mm
3 ¼ ± ¼ “
Ride height, rear 105 ± 5 mm
4½ ± ¼ “
Rider’s Weight Spring Spring Rate
75 kg/ 165 lbs Standard swingarm 06320-13 58 N/mm
85 kg/ 187 lbs Standard swingarm 06320-14 60 N/mm
95 kg/ 209 lbs Standard swingarm 06320-16 64 N/mm
Spring Guide