Haier AU362XHERA Installation guide

No. 0150501212 B

Please read this manual carefully before using this air conditioner

Please keep this manual safely for future use

OUTDOOR UNIT

INVERTER

INSTALLATION MANUAL

EN

MANUALE DI INSTALLAZIONE

IT

MANUEL D’INSTALLATION

FR

INSTALLATIONSANLEITUNG

DE

MANUAL DE INSTALACIÓN

ES

R410A X-MULTI INVERTER

AU182XFERA

AU222XFERA

AU252XGERA

AU282XHERA

AU342XHERA

AU362XHERA

Page is loading ...

AU182XFERA AU222XFERA AU252XGERA AU282XHERA AU342XHERA AU362XHERA

CE

Tutti i prodotti sono conformi alle seguenti normative europee:

- Direttiva 73/23/EEC Basso Voltaggio

- Direttiva 2006/95/EC Basso Voltaggio

- Direttiva 89/336/EEC Compatibilità elettromagnetica

ROHS

Il prodotto è conforme alla normativa 2002/95/EEC sulla restrizione d’uso di

sostanze inquinanti negli apparecchi elettrici ed elettronici.

WEEE

Informativa al consumatore come previsto dalla normativa europea

2002/96/CE riguardante i rifiuti di apparecchiature elettriche ed elettroniche.

SPECIFICHE DI SMALTIMENTO:

Il climatizzatore è contrassegnato con questo simbolo,

ciò significa che i prodotti elettrici ed elettronici non

possono essere smaltiti insieme ai rifiuti domestici non

differenziati. Non cercare di demolire il sistema da soli:

la demolizioni dei sistemi di condizionamento, nonché il

recupero del refrigerante, dell’olio e di qualsiasi altra

parte devono essere eseguiti da un installatore qualifi-

cato in conformità alla legislazione locale e nazionale

vigente in materia.I climatizzatori devo essere trattati presso una struttura spe-

cializzata nel riutilizzo, riciclaggio e recupero dei materiali. Il corretto smaltimen-

to del prodotto eviterà le possibili conseguenze negative all’ambiente e alla

salute dell’uomo. Per maggiori informazioni contattare l’installatore o le autori-

tà locali. Le batterie devono essere tolte dal telecomando e smaltite separata-

mente conformemente alla legislazione locale e nazionale vigente in materia.

CONFORMITÀ ALLE DIRETTIVE EUROPEE PER I MODELLI:

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

IT

AU182XFERA AU222XFERA AU252XGERA AU282XHERA AU342XHERA AU362XHERA

CE

All the products are in conformity with the following European provision:

- Low Voltage Directive 73/23/EEC

- Low Voltage Directive 2006/95/EC

- Electromagnetic CompatibilitY 89/336/EEC

ROHS

The products are fulfilled with the requirements in the directive 2002/95/EEC of the

European parliament and of the council on the Restriction of the use of Certain Haz-

ardous Substances in Electrical and Electronic Equipment (EU RoHS Directive)

.

WEEE

In accordance with the directive 2002/96/CE of the European parliament,

herewith we inform the consumer about the disposal requirements of the

electrical and electronic products.

DISPOSAL REQUIREMENTS:

Your air conditioning product is marked with this sym-

bol. This means that electrical and electronic products

shall not be mixed with unsorted household waste.

Do not try to dismantle the system yourself: the dis-

mantling of the air conditioning system, treatment of

the refrigerant, of oil and of other part must be done

by a qualified installer in accordance with relevant

local and national legislation.

Air conditioners must be treated at a specialized treatment facility for re-use,

recycling and recovery. By ensuring this product is disposed of correctly, you

will help to prevent potential negative consequences for the environment and

human health. Please contact the installer or local authority for more infor-

mation. Battery must be removed from the remote controller and disposed of

separately in accordance with relevant local and national legislation.

EUROPEAN REGULATIONS CONFORMITY FOR THE MODELS:

EN

AU182XFERA AU222XFERA AU252XGERA AU282XHERA AU342XHERA AU362XHERA

CE

Tous les produits sont conformes aux directives européennes suivantes:

- Directive 73/23/CEE Basse tension

- Directive 2006/95/CE Basse tension

- Directive 89/336/CEE Compatibilité électromagnétique

ROHS

L'appareil est conforme à la directive 2002/95/CEE relative à la limitation de

l'utilisation de certains substances dangereuses dans les équipements élec-

triques et électroniques.

DEEE (WEEE)

Information au consommateur comme le prévoit la directive européenne

2002/96/CE relative aux déchets d'équipements électriques et électro-

niques.

SPECIFICATIONS POUR L'ELIMINATION:

Ce pictogramme, apposé sur le climatiseur, signifie

que les équipements électriques et électroniques ne

peuvent pas être éliminés avec les déchets ménagers

non triés. Ne pas essayer de démanteler l'équipement

soi-même: le démantèlement des systèmes de clima-

tisation, ainsi que la récupération du frigorigène, de

l'huile et de toute autre partie doivent être effectués

par un installateur qualifié conformément à la législa-

tion locale et nationale en vigueur en la matière. Les climatiseurs doivent être

traités dans un centre spécialisé dans la réutilisation, le recyclage et la valo-

risation des matériaux. L'élimination correcte de ces appareils permet d'évi-

ter les effets nocifs sur l'environnement et la santé humaine. Pour plus de

renseignements contacter l'installateur ou les autorités locales. Les piles doi-

vent être retirées de la télécommande et éliminées séparément, conformé-

ment à la législation locale et nationale en vigueur en la matière.

CONFORMITÉ AUX DIRECTIVES EUROPÉENNES POUR LES MODÈLES:

FR

Page is loading ...

Questo prodotto contiene gas fluorurati ad effetto serra inclusi nel Protocollo

di Kyoto. Non liberare tali gas nell’atmosfera.

Tipo di refrigerante: R410A

Valore GWP*: 1975

*

GWP = potenziale di riscaldamento globale

Compilare con inchiostro indelebile,

• 1 la carica di refrigerante di fabbrica del prodotto

• 2 la quantità di refrigerante aggiuntiva nel campo e

• 1+2 la carica di refrigerante totale

sull’etichetta di carica del refrigerante fornita con il prodotto

L’etichetta compilata deve essere collocata in prossimità della portata di cari-

ca del prodotto (ad esempio, nell’interno del coperchio della valvola d’inter-

cettazione).

A contiene gas fluorurati ad effetto serra inclusi nel protocollo di Kyoto

B carica di refrigerante di fabbrica del prodotto: vedi targhetta con il nome

dell’unità

C quantità di refrigerante aggiuntiva nel campo

D carica di refrigerante totale

E unità esterna

F cilindro del refrigerante e collettore di carica

INFORMAZIONI IMPORTANTI SUL REFRIGERANTE UTILIZZATO

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

1

1+2=

kg

R410A

2

kg

2=

1=

B

C

D

FE

kg

Contains fluorinated greenhouse gases

covered by the Kyoto Protocol

A

This product contains fluorinated greenhouse gases covered by the Kyoto

Protocol. Do not vent into the atmosphere.

Refrigerant type: R410A

GWP* value: 1975

*

GWP = global warming potential

Please fill in with indelible ink,

• 1 the factory refrigerant charge of the product

• 2 the additional refrigerant amount charged in the field and

• 1+2 the total refrigerant charge

on the refrigerant charge label supplied with the product.

The filled out label must be adhered in the proximity of the product charging

port (e.g. onto the inside of the stop valve cover).

A contains fluorinated greenhouse gases covered by the Kyoto Protocol

B factory refrigerant charge of the product: see unit name plate

C additional refrigerant amount charged in the field

D total refrigerant charge

E outdoor unit

F refrigerant cylinder and manifold for charging

IT

IMPORTANT INFORMATION REGARDING THE REFRIGERANT USED

EN

Ce produit contient des gaz à effet de serre fluorés encadrés par le protoco-

le de Kyoto. Ne pas laisser les gaz s’échapper dans l’atmosphère.

Type de réfrigérant: R410A

Valeur GWP*: 1975

*

GWP = potentiel de réchauffement global

Prière de compléter à l’encre indélébile,

• 1 la charge de réfrigérant d’usine du produit

• 2 la quantité de réfrigérant supplémentaire chargée sur place et

• 1+2 la charge de réfrigérant totale

sur l’étiquette de charge de réfrigérant fournie avec le produit.

L’étiquette complétée doit être apposée à proximité de l’orifice de recharge

du produit (par ex. à l’intérieur du couvercle de la vanne d’arrêt).

A contient des gaz à effet de serre fluorés encadrés par le protocole de

Kyoto

B charge de réfrigérant d’usine du produit: voir plaquette signalétique de

l’unité

C quantité de réfrigérant supplémentaire chargée sur place

D charge de réfrigérant totale

E unité extérieure

F cylindre de réfrigérant et collecteur de recharge

INFORMATION IMPORTANTE RELATIVE AU RÉFRIGÉRANT UTILISÉ

FR

Page is loading ...

OUTDOOR UNIT

INSTALLATION MANUAL

AU182XFERA

AU222XFERA

AU252XGERA

AU282XHERA

AU342XHERA

AU362XHERA

Please read this manual carefully before installing the units.

Please keep this manual safely for future use.

R410A MULTI SPLIT SERIES ROOM AIR CONDITIONER

Contents

Unit appearance

Cautions

Safety precautions

Installation instructions

Installation drawings of indoor and outdoor units

Matching of the indoor and outdoor units

Installation procedure

Purging method: to use vacuum pump

Wiring work

Test running & Items to confirm

Trouble shooting

1

2-3

4

5-6

7

8-13

14-17

18

19-22

23

24

Unit appearance

AU252XGERAAU182XFERA

AU222XFERA

AU282XHERA

AU342XHERA

AU362XHERA

1

Cautions

2

Disposal of the old air conditioner

Before disposing an old air conditioner that goes

out of use, please make sure it's inoperative and

safe. Unplug the air conditioner in order to avoid

the risk of child entrapment.

It must be noticed that air conditioner system

contains refrigerants, which require specialized

waste disposal. The valuable materials contained

in a air conditioner can be recycled. Contact your

local waste disposal center for proper disposal of

an old air conditioner and contact your local

authority or your dealer if you have any question.

Please ensure that the pipework of your air

conditioner does not get damaged prior to being

picked up by the relevant waste disposal center,

and contribute to environmental awareness by

insisting on an appropriate, anti-pollution method

of disposal.

Disposal of the packaging of your new air

conditioner

All the packaging materials employed in the

package of your new air conditioner may be

disposed without any danger to the environment.

The cardboard box may be broken or cut into

smaller pieces and given to a waste paper disposal

service. The wrapping bag made of polyethylene

and the polyethylene foam pads contain no

fluorochloric hydrocarbon.

Consult your local authorities for the name and

address of the waste materials collecting centers and

waste paper disposal services nearest to your house.

All these valuable materials may be taken to a

waste collecting center and used again after

adequate recycling.

Safety Instructions and Warnings

Before starting the air conditioner, read the

information given in the User's Guide carefully.

The User's Guide contains very important

observations relating to the assembly, operation

and maintenance of the air conditioner.

The manufacturer does not accept responsibility

for any damages that may arise due to non-

observation of the following instruction.

Damaged air conditioners are not to be put into

operation. In case of doubt, consult your supplier.

Use of the air conditioner is to be carried out in

strict compliance with the relative instructions set

forth in the User's Guide.

Installation shall be done by professional people,

don't install unit by yourself.

For the purpose of safety, the air conditioner

must be properly grounded in accordance with

specifications.

Always remember to unplug the air conditioner

before opening inlet grill. Never unplug your air

conditioner by pulling on the power cord. Always

grip plug firmly and pull straight out from the

outlet.

Cautions

3. If the fuse on PC board is broken please change

it with the type of T 3.15A /250VAC or T

25A/250VAC.

Please check the circuit diagram about the fuse

replaced.

4. The wiring method should be in line with the

local wiring standard.

5. The power cable and connecting cable are self-

provided. All the cables shall have got the local

authentication certificate. During installation, when

the connecting cables break off, it must be assured

that the grounding wire is the last one to be broken

off.

6. The breaker of the air conditioner should be all-

pole switch; and the distance between its two

contacts should be no less 3mm. Such means for

disconnection must be incorporation in the fixed

wiring.

7. The waste battery shall be disposed properly.

All electrical repairs must be carried out by

qualified electricians. Inadequate repairs may result

in a major source of danger for the user of the air

conditoiner.

Do not damage any parts of the air conditioner

that carry refrigerant by piercing or perforating the

air conditioner's tubes with sharp or pointed items,

crushing or twisting any tubes, or scraping the

coatings off the surfaces. If the refrigerant spurts

out and gets into eyes, it may result in serious eye

injuries.

Do not obstruct or cover the ventilation grille

of the air conditioner. Do not put fingers or any

other things into the inlet/outlet and swing louver.

Do not allow children to play with the air

conditioner. In no case should children be allowed

to sit on the outdoor unit.

Specifications

The refrigerating circuit is leak-proof.

1. Applicable ambient temperature range:

The machine is adaptive in following

situation

2. If the supply cord is damaged, it must be replaced

by the manufacturer or its service agentor a similar

qualified person.

3

Cooling

Indoor

Maximum:D.B/W.B

Minimum:D.B/W.B

Maximum:D.B

Minimum:D.B

Maximum:D.B

Minimum:D.B

Maximum:D.B/W.B

Minimum:D.B/W.B

Heating

Outdoor

32 C/23 C

18 C/14 C

43 C/26 C

10 C/6 C

27 C

20 C

24 C/18 C

-15 C

Safety precautions

4

All units shall be earthed. The earth must not be connected to a gas pipe, water pipe, or telephone line.

Poor earthing could cause electric shock.

Be sure to install a circuit breaker to avoid electric shock.

Arrange water drainage according to this manual. Cover pipe with insulation materials to prevent

condensation occuring. Improper installation of water drainage will cause water leakage.

Installation work must be carried out by professional qualified people, do not install the unit by yourself.

Incorrect installation will cause water leakage, electric shock and potentially fire.

Install the unit as per the manual. Incorrect installation will cause water leakage, electric shock or

fire risk.

Be sure to use specified accessories and parts. Otherwise, water leakage, electric shock, fire risk or unit

falling down may occur .

Mounting position must be strong enough to hold the unit. Or, the unit will potentially fall down causing

injuries.

When installing the unit, take in consideration storms and high winds. Incorrect installation may cause

the unit to fall down.

All electric work should be carried out by experienced personnel as per current regulations and this

manual. Incorrect installation or undersized electric cable may cause electric shock or fire risk.

All circuits must be earthed. Ensure that no external forces will affect the terminal block and electric

cable. Poor wiring and installation may cause fire risk.

Arrange wire connection between connecting the indoor and outdoor power supply correctly. Fix terminal

cover firmly to avoid overheating, electric shock or even fire risk.

In the case of a refrigerant leakage during unit installation, keep the room well ventilated.

Check the unit upon installation. Be sure there is no leakage. Refrigerant will induce a poisonous gas

subject to heat.

Isolate power supply before touching terminal block.

To ensure proper installation, please read this safety precautions carefully before the installation. After

installation, start the unit correctly and ensure that you show the customer how to operate and maintain

the units.

WARNING!

CAUTION! Incorrect operations may result in injuries or machine damages; in some cases may cause

serious consequences.

Incorrect operations may result in severe consequences of death or serious injuries.

To maintain good picture or reduce noise, keep the unit at least 1m from T.V. or radio, when installing

the communication wire and power supply. (If the radio wave is relatively strong, 1m is not enough to

reduce the interference).

Do not install the unit in following places:

(a) Oil mist or oil gas exists, such as kitchen, or, plastic parts may age, or water leakage.

(b) Where there is corrosive gas. Copper tube and welded part may be damaged due to corrosion

causing leakage.

(c) Where there is strong radiation. It will affect the unit's control system, causing malfunction of the

unit.

(d) Where there are flammable gas, dirt, and volatile matter (thinner, gasoline) exist, these items will

cause a fire risk.

WARNING

Installation instructions

The following accessories are supplied together with the outdoor unit.

AU182XFERA

AU222XFERA

5

Place, robust not causing vibration, where the body can be supported sufficiently.

Place, not affected by heat or steam generated in the vicinity, where inlet and outlet of the unit are not

disturbed.

Place, possible to drain easily, where piping can be connected with the outdoor.

Place,where cold air can be spread in a room entirely.

Place, nearby a power receptacle, with enough space around.(Refer to drawings).

Place, where the distance of more than 1m from televisions, radios, wireless apparatuses and fluorescent

lamps can be left.

In the case of fixing the remote controller on a wall, place where the indoor unit can receive signals when

the fluorescent lamps in the room are lightened.

No.

1

2

3

Quantity

1

4

1

Name of parts

Drainage elbow

Rubber cushion

Clap

Drawing

Installation accessories

Choose the installation place

Installation dimensions(mm)

113.5

583

113.5

Installation instructions

AU252XGERA

AU282XHERA

AU342XHERA

AU362XHERA

6

860

976

115 630

950

1068

340

580 185185

950

1068

340

580

185

Installation drawings of indoor and outdoor units

1. Do not connected the embedded branch piping and the outdoor unit when only carrying out piping work

without connecting the indoor unit in ordor to add another indoor unit later. Make sure no dirt or mositure

gets into eigher side of the embedded branch piping.

2.It is impossible to connect the indoor unit for one unit only. Be sure to connect at least 2 units.

Installation sketch map is illustrated for

example model AU362XHERA.

7

If there is the danger of

the unit falling or

overturning, fix the unit

with foundation bolts,

or with wire or other means.

If the location does not have good drainage, place the unit on a level mounting base(or a plastic pedestal).

Install the outdoor unit in a level position. Failure to do so may result in water leakage or accumulation.

Arrangement of piping directions

Rear left

Rear right

Right

Below

Left

Attention must be

paid to the rising up

of drain hose

Wrap the insulation pipe with the finishing

tape from bottom to top.

Cut thermal insulation pipe to an

appropriate length and wrap it with tape,

making sure that no gap is left in the

insulation pipe's cut line.

Matching of the indoor and outdoor units

8

WARNING!

Combinations those marked * can not be applied where the temperature in winter is too low and in

summer is too higher to avoid bad heating or cooling effect.

Combination

A B C

Remark

07 12

09 09

09 12

12

07 07 07

07 07 09

07 07 12

07 09 09

07 09 12

09 09 09

09 09 12

1:2

1:3

*

AU182XFERA

-

AU222XFERA

07 14

09 12

09 14

12

07 07

09

07

07 12

07

09 09

07 09

12

09 09 09

09 09 12

1:2

1:3

*

09

12 12

*

Combination

A B C

Remark

Matching of the indoor and outdoor units

9

Remark

07

09

12

14

18

07

09

12

07

09

A B

12

14

18

12

14

18

12

14

18

14

18

07

09

12

09

12

07

09

C

-

07

09

12

14

18

09

12

14

18

12

14

18

09

12

14

18

12

14

18

12

14

07

09

12

09

D

-

07

09

12

14

09

12

14

12

09

12

09

12

-

*

-

*

-

*

-

*

Combination

1:2

1:3

1:4

AU252XGERA

Matching of the indoor and outdoor units

10

Remark

07

09

12

14

18

07

09

12

14

07

09

A B

18

14

18

14

18

07

09

12

14

07

09

12

C

-

12

14

18

09

12

14

18

09

12

14

18

12

14

12

14

18

14

18

14

07

09

12

D

-

07

09

12

14

18

09

12

14

18

09

12

14

18

09

12

14

12

14

12

-

*

-

*

-

*

-

*

-

*

-

*

-

*

Combination

1:2

1:3

1:4

AU282XHERA

Matching of the indoor and outdoor units

11

AU342XHERA

Remark

12

14

18

07

09

12

14

07

09

12

A B

18

14

18

07

09

12

14

07

09

12

C

-

14

18

12

14

18

09

12

14

18

12

14

12

14

18

14

18

14

18

07

09

12

14

09

12

09

12

D

-

09

12

14

18

09

12

14

18

12

14

09

12

14

18

12

14

09

12

14

18

12

14

12

-

*

-

*

-

*

-

*

-

*

-

*

Combination

1:2

1:3

1:4

Matching of the indoor and outdoor units

12

AU362XHERA

Remark

12

14

18

07

09

12

14

07

09

12

A B

18

14

18

07

09

12

14

07

09

12

C

-

14

18

12

14

18

09

12

14

18

12

14

12

14

18

14

18

14

18

07

09

12

14

09

12

09

12

D

-

09

12

14

18

09

12

14

18

12

14

09

12

14

18

12

14

09

12

14

18

12

14

12

-

*

-

*

-

*

-

*

-

*

-

*

Combination

1:2

1:3

1:4

Matching of the indoor and outdoor units

Remark

A B C

D

-

*

-

*

-

*

-

*

Combination

1:5

E

13

07

09

07

09

12

09

07

09

12

09

12

09

12

07

09

12

09

12

09

12

09

12

07

09

12

14

18

09

12

14

18

12

14

18

09

12

14

18

12

14

18

12

14

09

12

14

18

12

14

18

12

14

12

09

12

14

18

12

14

12

Installation procedure

14

Before inserting power plug into receptacle, check the voltage without fail. The power source is the same

as the corresponded name plate.

Install an exclusive branch circuit of the power.

A receptacle shall be set up in a distance where the power cable can be reached. Do not extend the cable

by cutting it.

2.Selecting a location for installation of the indoor units

The maxinum allowable length of refrigerant piping, and the maxmum allowable height difference

between the outdoor and indoor units, are listed below.

(The shorter the refrigerant piping, the better the performance. Connect so that the piping is as short as

possible. Shortest allowable length per room is 3m)

1.Precautions on installation

Check the strength and level of the installation ground so that unit will not cause any operating vibration

or noise after installation.

In accordance with the foundation drawing in fix the unit securely by means of the foundation bolts.

It is best to screw in the foundation bolts unit their length are 20 mm from the foundation surface.

Power source

Limitations on the installation

Outdoor unit capacity class

Piping to each indoor unit

Total length of liquid piping

between all units

AU252XGERA AU282XHERA

AU342XHERA AU362XHERA

25m max.

60m max.

AU182XFERA AU222XFERA

25m max.

45m max.

Installation procedure

The piping length information, please refer the following table.

Descriptions Standard

A, B, C, D, E liquid pipe

A, B, C, D,E Gas pipe

mm

Item MaximumUnit

L1 (one way)

L2 (one way)

L3 (one way)

h

H +

H -

mm

m

Size of the liquid side connection pipe

Drop between every two indoor units

Drop between the outdoor unit and the indoor unit

/

Size of the gas side connection pipe

Drop between the outdoor unit and the indoor unit

6.35

9.52

L1+L2+L3+L4+L5 m

Total liquid piping length(It is no need to charge additional

refrigerant within this value)

L4 (one way) m

Conneting pipe length

L5 (one way) m

Conneting pipe length

1

5

10

5

15

10

25

L1

L2

L5

h

H +

A

B

E

C

L3

L4

D

15

10

40

60

10

25

H -

3. Limitations values on the piping work .

Page is loading ...

Haier AU362XHERA Installation guide

This manual is also suitable for

Haier AU362XHERA Installation guide

in other languages

Related papers

Other documents