Heinner MG-Y1800X is a powerful 1800W meat grinder with a variety of functions and attachments that make it a versatile kitchen appliance. It can mince meat, make sausages, and juice tomatoes. The device also comes with kibbe and dam-board knob attachments, expanding its functionality even further. With its durable stainless steel construction and easy-to-clean parts, the Heinner MG-Y1800X is a great choice for home cooks who want a reliable and efficient meat grinder.
Heinner MG-Y1800X is a powerful 1800W meat grinder with a variety of functions and attachments that make it a versatile kitchen appliance. It can mince meat, make sausages, and juice tomatoes. The device also comes with kibbe and dam-board knob attachments, expanding its functionality even further. With its durable stainless steel construction and easy-to-clean parts, the Heinner MG-Y1800X is a great choice for home cooks who want a reliable and efficient meat grinder.
MEAT GRINDER
Model: MG-Y1800X
www.heinner.ro
•Meat Grinder
•Max Power: 1800W
•Color: stainless steel
www.heinner.com 1800W, 50-60Hz, 220-240V
1
Thank you for purchasing this product!
I. INTRODUCTION
Before using the appliance, please read carefully this instruction manual and keep it for future
reference.
This instruction manual is designed to provide you with all required instructions related to the
installation, use and maintenance of the appliance.
In order to operate the unit correctly and safety, please read this instruction manual carefully before
installation and usage.
II. CONTENT OF YOUR PACKAGE
➢
Meat grinder
➢Sausage accesory
➢Tomato accesory
➢3 cutting plates, 1 knife, food tray, pusher
➢User manual
➢
Warranty card
www.heinner.com 1800W, 50-60Hz, 220-240V
2
III. SAFETY MEASURES
•Household use only. Do not use for industrial purpose.
•
Always disconnect the appliance from the supply if it is left unattended and
before assembling, disassembling or cleaning.
•
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
•Close supervision is necessary when any appliance is used near children.
•
When carrying the unit be sure to hold the motor housing with both hands.
Do not carry the unit by holding only the hopper plate or head.
•
Do not fix the cutting blade and cutting plate when using kibbe attachment.
•Never feed food by hand. Always use food pusher.
•Do not grind hard food such as bones, nuts, etc.
•Do not grind ginger and other materials with hard fiber.
•
Continuous running of meat grinder should be not more than 10 minutes
with the motor cool down to room temperature before switching on again.
•
Reverse function is prohibited while the appliance is operating (For
example switch “ON” knob to “R” knob or on the contrary), wait at least
one minute until grinder has come to a complete stop，
otherwise it may
cause an abnormal noise, vibration or a transitory electric spark in the
appliance. It could result easily damage to appliance and make a user
frightened.
•
After use, there would be a little food left in the grinder head. This is
normal. There might be a bit of black metal powder adhering to the food
ground in the end. Please pick them out and throw away, do not eat them.
•
To avoid jamming, do not force to operate the unit with excessive pressure.
•When the circuit breaker activates, do not switch on.
•Never try to replace the parts and repair the unit by yourself.
•
This appliance shall not be used by children. Keep the appliance and its
cord out of reach of children.
•
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe
way and if they understand the hazards involved.
•Children shall not play with the appliance.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or a similarly qualified person in order to avoid a hazard.
SAVE THESE INSTRUCTIONS. HOUSEHOLD USE ONLY.
www.heinner.com 1800W, 50-60Hz, 220-240V
3
IV. DESCRIPTION
V. USING INSTRUCTIONS
1. Hopper plate
11. Cutting plate (coarse)
2. Motor housing
12. Fixing ring
3. ON/OFF
13. Cutting blade
4. REV
14. Sausage attachment
5. Unlock button
15. Kibbe attachment
6. Food pusher
16. Head inlet
7. Head
17. Adjustable screw
8. Feed screw
18. Dam-board knob attachment
9. Cutting plate (fine)
19. Screen
10. Cutting plate (medium)
20. Tomato attachment snake
21. Tomato attachment bracket
www.heinner.com 1800W, 50-60Hz, 220-240V
4
FOR THE FIRST TIME
•Check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
•
Wash all parts (except body) in warm soapy water.
•Before plugging in, ensure the “ON/OFF/ Reverse” switch is turned to "OFF"
position.
INSTRUCTION FOR USE
ASSEMBLING
•Holding the head and insert it in the inlet with one hand, place the locking knob
into the hole on the side of the motor housing,
tighten it clockwise to secure
the head (fig.2).
•Place the feed screw into the head, long end first, by turning the feed screw
slightly until it is set into the motor housing (fig.3).
•Place the cutting blade onto the feed screw shaft with the blade facing the front
as illustrated (fig.4). If it is not fitted properly, meat will not be ground.
•Place the desired cutting plate next to the cutting blade, fitting protrusions in
the slots (fig.5).
•Support or press the centre of the cutting plate with one finger then screw the
fixing ring until tight with another hand (fig.6). Do not over tighten.
•
Place the hopper plate on the head and fix into position.
•
Locate the unit on a firm place.
•The air passage at the bottom and the side of the motor housing should be kept
free and not blocked.
www.heinner.com 1800W, 50-60Hz, 220-240V
5
MINCING MEAT
•Cut all foods into pieces. Sinewless, boneless and fatless meat is
recommended, approximate size 20 mm x 20 mm x 60 mm, so that they fit
easily into the hopper opening.
•
Plug in and turn the “ON/OFF” switch to "ON" position.
•
Feed foods into the hopper plate. Use only the food pusher (fig.7).
•
After use switch the unit off and unplug it from the power supply.
REVERSE FUNCTION
•In case of jamming switch the appliance off by turning the “reverse” switch.
•Feed screw will be rotating in the opposite direction, and the head will get
empty.
•
If it doesn't work, switch the unit off and clean it.
MAKING KIBBE
STUFFING
Mutton 100g
Olive oil 1 1/2 tablespoons
Onion (cut finely) 1 1/2 tablespoons
Spices to your taste
Salt to your taste
Flour 1 1/2 tablespoons
•
Mince mutton once or twice.
•
Fry onion until brown and add minced mutton, all spice, salt and flour.
www.heinner.com 1800W, 50-60Hz, 220-240V
6
OUTLET COVER
Lean meat 450g
Flour 150-200g
Spices to your taste
Nutmeg (cut finely) 1
Powdered red pepper to your taste
Pepper to your taste
•Mince meat three times and mix all ingredients together in a bowl. More meat
and less flour for outlet cover create better consistency and taste.
•
Grind the mixture three times.
•Disassemble by reversing the steps from 5-3 to remove the cutting plate and
cutting blade.
•Place kibbe attachments onto the feed screw shaft together, fitting protrusions
in the slots (fig.8).
•
Screw fixing ring into place until tight. Do not over tighten (fig.9).
•
Make the cylindrical outlet cover (fig.10).
•
Form kibbe as illustrated below and deep fry.
www.heinner.com 1800W, 50-60Hz, 220-240V
7
MAKING SAUSAGE
•Before starting please assemble sausage attachment as per following (fig.11)
•
Operate the steps according to the instructions of MINCING MEAT which mention
above.
TOMATO JUICER
•Put the fix ring through the tomato juicer bracket (fig. A).
•Revolve the adjusted nail to the front of tomato juicer basket(fig. B).
•Pack the attachments like fig. C-D.
•
Put the containers under tomato juicer attachment like fig. E to collect juice and
residue. Cut the tomato into fix meat grinder like head size, then press them gently,
it can short the working time.
•Adjust the screw can make the juice dense or thin.
•Disassembly and clean the tomato juicer as soon as juice completely.
www.heinner.com 1800W, 50-60Hz, 220-240V
8
DISASSEMBLING
•Make sure that the motor has stopped completely.
•Disconnect the plug from the power outlet.
•Disassemble by reversing the steps from 6-1 pictures.
•If the fixing ring is not easily removed by hands, please use tools（fig.12）.
•
To remove the cutting plate easily, place a screwdriver between the cutting plate
and the head as illustrated and lift it up (fig.13).
•
Press the unlock button before removing the head. Holding the head, rotate it in the
same direction as fig.14. Then the head can be removed easily.
CLEANING
•
Before you clean the appliance, switch the appliance off and remove the plug from
the socket.
•Never clean the unit by a dishwasher.
•Remove meat, etc. Wash each part in warm soapy water.
•A bleaching solution containing chlorine will discolor aluminum surfaces.
•Do not immerse the motor housing in water, but only wipe it with a damp cloth.
•Thinners and petrol will crack or change the color of the unit.
•Wipe all the cutting parts by vegetable oil -wet cloth.
•Wash all the metal parts in water below 50℃
and dry, in case the unit is left unused
for a long period of time, wipe them by vegetable oil -wet cloth.
VI. CLEANING
www.heinner.com 1800W, 50-60Hz, 220-240V
9
Max Power
1800W
Mincing capacity
≤2 kg/min
Voltage
220-240V; 50-60Hz
VII. TECHNICAL DETAILS
ACCESSORIES STORAGE:
•The storage compartment is on the back of the unit as picture (A-1).
•Push the cover of storage compartment to open it as picture (A-2).
•
Put the clean accessories (such as blade, cutting plates, sausage attachment, kibbe
attachment) into the storage compartment as picture (A-3).
www.heinner.com 1800W, 50-60Hz, 220-240V
10
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipment’s to
an appropriate waste disposal center.
HEINNER
is a registered trademark of Network One Distribution SRL. Other brands and
product names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from NETWORK
ONE DISTRIBUTION.
Copyright © 2013 Network One Distribution. All rights reserved.
www.heinner.com, http://www.nod.ro
This product is in conformity with norms and standards of European Community.
Importer: Network One Distribution
Marcel Iancu Street, 3-5, Bucharest, Romania
Tel: +40 21 211 18 56, www.heinner.com , www.nod.ro
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Heinner MG-Y1800X is a powerful 1800W meat grinder with a variety of functions and attachments that make it a versatile kitchen appliance. It can mince meat, make sausages, and juice tomatoes. The device also comes with kibbe and dam-board knob attachments, expanding its functionality even further. With its durable stainless steel construction and easy-to-clean parts, the Heinner MG-Y1800X is a great choice for home cooks who want a reliable and efficient meat grinder.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Heinner MG-1340WH User manual
-
Heinner HEG-F20002P User manual
-
Heinner SM-K750BKRX User manual
-
Heinner C300SS User manual
-
Heinner SM-2H900BKS User manual
-
Heinner HSJ-200WH User manual
-
Heinner CH-400-BRW User manual
-
Heinner HSJ-200X User manual
-
Heinner HCF-251NHF User manual
-
Heinner HVC-VB750RD User manual
Other documents
-
Premier ED-4819 User manual
-
ElectrIQ EIQMEATG User manual
-
Adexa MGL10 User manual
-
King ProMeat K 113 User manual
-
Coopers 9021 Operating instructions
-
ARDESTO MGL-2050R Owner's manual
-
ARDESTO MGK-2100 Electric Meat Grinder Owner's manual
-
ARDESTO MGK-2400 Owner's manual
-
ARDESTO MGA-2300J Owner's manual
-
ARDESTO MGK-2400 User manual
