Kids Ride-on Train
TQ10089BL
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Before You Start
General Warnings:
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation can lead to
a danger.
We recommend that, where possible, all items are assembled near the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Ensure a secure surface during installation, and place the product always on a flat,
steady and stable surface.
WARNING
Attention: The Product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product away from babies
and children, otherwise they may pose a choking hazard.
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 years.
0-3
Please read all instructions carefully and keep it for future reference.
02
PRODUCT SPECIFICATIONS
Battery: 6V4AH
Charger: 7.2V500mA
Suitable age: 3+ years
Load Capacity: 55 lbs25kgs
Speed: 1.6 MPH2.5km/h
Size: 20” x 8” x 13.6”
51.5 x 21.5 x 34.5cm
Power way: Charging type
Charge time: 6-8hours
ACCESSORIES LIST
Car body x1
Steering wheel x1
charger x1
Prevent back x1
Orbital x16
Screwdriver x1Back of a chair x1 Short screw x2
Long screw x2
03
VEHICLE BODY INSTALLATION
Step 1: Connect the steering wheel wire to the body wire, and
then insert the steering wheel into the front axle and tighten the
screws on both sides.
Step 2: Align the backrest with the round hole at the
rear of the vehicle and press it down. The toy electric
vehicle has been successfully installed.
The pedals on both sides of the
car can be pulled out.
Use short screw
04
Use long screw
PREVENT BACK
STEERING WHEEL FUNCTIONS
Align the two
accessories with the
screw holes on the
vehicle body, and lock
them with the longest
screw in the screw
package
(Note: the upper
connection
accessories need to
be purchased
separately)
1.Loosen the screws and
open the cover
2.Use 2 1.5V "AA" size
batteries (this product
does not include batteries)
3.Press the left button to
play music and display
brilliant lights effect.
4.Press the right button tightly to advance the battery vehicle.
Release the right button to stop the battery vehicle.
05
TRACK
INSTALLATION
STICKER INDICATOR DIAGRAM
CHARGING
Alignment notch installation.
Connect the charger to the charging port
on the vehicle body before inserting the
charger plug into the socket. It can be
charged for 6-8 hours. It is recommended
to charge it 8-12 hours for the first time.
1 The battery should be put
into the battery slot correctly.
2 Discarded batteries should
be removed from toys.
3 The product is equipped
with a battery charger. It should
be regularly inspected for
damage to its wires, plugs, shells
and other parts. If the wires,
plugs, shells and other parts are
damaged, stop using it until they
are repaired. 4 This product
should be assembled by an adult.
PRECAUTIONS
06
Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item. US:cs.us@costway.com
UK:cs.uk@costway.com
US office: Fontana UK office: Ipswich AU office: Truganina
/