Purmo Optimizer Installation guide

Brand
Purmo
Model
Optimizer
Type
Installation guide

Purmo Optimizer is a 6-way control valve that, in combination with a pressure-independent valve and actuator, provides a complete pressure-independent, efficient, and balanced control unit. The device can be used for control or monitoring of individual rooms or central control in 4-pipe systems. The PICV valve can be installed in any position and should be mounted in the supply and return line. Installation of strainers and isolated ball valves is recommended. The temperature should not be below 0°C. The OPTIMIZER control unit can either be mounted on a pipe, DIN rail, or wall.

Purmo Optimizer is a 6-way control valve that, in combination with a pressure-independent valve and actuator, provides a complete pressure-independent, efficient, and balanced control unit. The device can be used for control or monitoring of individual rooms or central control in 4-pipe systems. The PICV valve can be installed in any position and should be mounted in the supply and return line. Installation of strainers and isolated ball valves is recommended. The temperature should not be below 0°C. The OPTIMIZER control unit can either be mounted on a pipe, DIN rail, or wall.

Optimizer
6-vägs ventil
6-way valve
Installationsanvisning
Assembly instruction
Purmo Group Sweden AB
Tel. +46 (0)433 737 00 4 8282 173
201023 rev.0
1
1
1
21
3
Opimizer 6-vägs styrventil I kombination med tryckobero-
ende ventil och ställdon ger en fullständigt tryckoberoende,
effektiv och balanserad styrenhet. För styrning/kontroll av
enstaka rum eller central styrning i 4-rörssytem.
Opimizer 6-way control valve In combination with
pressure-independent valve and actuator provides a
completely pressure-independent, efficient and balanced
control unit. For control / monitoring of individual rooms or
central control in 4-pipe systems.
OPTIMIZER 6-vägs monteras i tilloppet och
returen. Installation av silar och isolerade kulventiler är
rekommenderad. Temperaturen bör inte vara under 0 ° C
OPTIMIZER 6-Way is mounted in the supply and the
return line. Installation of strainers and isolation ball valves
are
recommended. The temperature should not be below 0°C.
1. Tillopp kyla/Cooling inlet
2. Tillopp värme/Heating inlet
3. Retur kyla/Cooling outlet
4. Retur värme/Heating outlet
PICV ventilen kan installeras i alla lägen.
The PICV can be installed in every position.
Montera ställdonet på 6-vägs ventilen.
Actuator mounting on 6-way valve.
1
45
5
Elschema
Electrical wiring
A. Orange/Organge
B. Lila/Purple
C. Röd/Red
D. Blå/Blue
E. Röd/Red
F. Svart/Black
Daggpunktssensor
Dew Point sensor
5
6
OPTIMIZER-styrenhet kan antingen monteras på ett
rör, DIN-skena eller vägg.
OPTIMIZER control unit can either be mounted on a
pipe, DIN-rail or wall.
Tillverkaren ansvarar inte för några
skador till följd av annan användning än på det angivna
applikationen. Sådan risk ligger helt hos användaren.
Monteringsanvisningarna betraktas som en del av
avsedd användning
The manufacturer is not liable for any
damage resulting from use other than in the designated
application. Such risk lies entirely with the user. Observance
of the mounting instructions is considered as part of the
valve
designated use
5
7
  • Page 1 1
  • Page 2 2

Purmo Optimizer Installation guide

Brand
Purmo
Model
Optimizer
Type
Installation guide

Purmo Optimizer is a 6-way control valve that, in combination with a pressure-independent valve and actuator, provides a complete pressure-independent, efficient, and balanced control unit. The device can be used for control or monitoring of individual rooms or central control in 4-pipe systems. The PICV valve can be installed in any position and should be mounted in the supply and return line. Installation of strainers and isolated ball valves is recommended. The temperature should not be below 0°C. The OPTIMIZER control unit can either be mounted on a pipe, DIN rail, or wall.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents