Becken AR COND PORTATIL BAC2511 Owner's manual

Instruction Manual

Manual de Instrucciones

Manual de Instruções

Air Conditioner

Aire Acondicionado

Ar Condicionado

Dear client,

We thank you for purchasing this product.

This appliance was submied to several laboratorial

tests, which cerfy its quality. To simplify the use of this

appliance, this instrucon manual has been provided.

The instrucons must ensure a quick and safe use.

Please read carefully the instrucons and safety measures

described in this manual.

We wish our clients great sasfacon in using their new

appliance.

EN

Local Air Conditioner | Aire Acondicionado | Ar Condicionado

INDEX

1. SAFETY INSTRUCTIONS

1.1. Power Energy

1.2. Power Cord and Other Cables

1.3. Humidity and Water

1.4. Cleaning

2. UTILIZATION AND FUNCTIONING

2.1. Product Description

2.2. Control Panel

2.2.1. Control Panel Operation

2.3. Remote Control

2.3.1. Remote Control Operation

2.3.2. Replacing the Batteries on the Remote Control

2.4. Operation Guide

2.5. Installation

2.5.1. Tools Required for Installation

2.5.2. Preparation Before the Installation and Accessories

2.5.3. Installation Site Instructions

2.5.4. Electrical Connection Requirements

2.5.5. Installing the Unit

2.5.5.1. Drainage Hose Installation

2.5.5.2. Double-Hung Sash Window Installation

2.5.5.3. Sliding Sash Window Installation

2.5.5.4. Heat Exhaust Hose Installation

2.6. Electrical Schematic Diagram

3. CARE AND MAINTENANCE

4. ERROR CODES

5. TROUBLESHOOTING

6. AFTERMARKET

7. ENVIRONMENT CONSERVATION

3





































1. SAFETY INSTRUCTIONS

ATTENCION

Risk of Electric Shock.

Do Not Open

Attention: to avoid the risk of electric shock,

do not remove the cover. The interior does not

contain any parts that may be repaired by the

user. Ask for assistance to qualied personnel.

Important Warnings

Before using your appliance, read carefully this instrucon manual and keep it in a

safe place, as you may need it for future consultaons.

Before you start your appliance, and to ensure a correct use, do not use it if:

• It has fallen on the ground;

•You noce any evidence of damage;

•Any anomaly occurs during its operaon;

To avoid hazards and deterioraon of your appliance by an incorrect use, it is advisable

to read the instrucons carefully and aenvely.

Your appliance must not be used to other ends than the ones foreseen in the

instrucons manual. Your safety is only guaranteed in a household use and not for

commercial use. The incorrect use will not be covered and automacally cancels the

right to warranty.

Assistance

Be sure that, in case of malfuncon, you take your appliance to a qualied technician

for assistance.

This appliance can be used by children from 8 years

old and above and persons with reduced physical,

sensory or mental capabilies or lack of experience

and knowledge if they have been given instrucon

concerning use of the appliance in a safe way and

understand the hazards involved. Children shall not

play with the appliance. Cleaning and maintenance

shall not be made by children without supervision.

These instrucons are also available on www.suporteworten.pt

1.1. Power Energy

Make sure the voltage of the electric network is compable with the one of the

appliance. If it does not match, consult the vendor or Customer Support Service.

1.2. Power Cord and Other Cables

Do not roll up or pull the cord to disconnect the appliance, and do not use to twine the

appliance. Keep the cord far from warm surfaces.

4

EN

Local Air Conditioner | Aire Acondicionado | Ar Condicionado

Never use the appliance if it has a damaged cable or socket, or if it is not working

properly.

In case of damage of the power cord, do not use your appliance. Take it to technical

assistance for its replacement.

1.3. Humidity and Water

Do not use your appliance in humid places. Do not let your appliance to catch water

under any circumstance, as it may be dangerous. TO AVOID FIRE HAZARD OR ELECTRIC

SHOCK DO NOT EXPOSE YOUR APPLIANCE TO HUMIDITY OR WATER. Do not place your

appliance under water (for example for washing).

1.4. Cleaning

Before cleaning, be sure to switch o the appliance and remove the plug from the

mains power supply.

Do not splash water on the units for cleaning, as electric shocks may occur. Wipe the

unit with a dry so cloth or a cloth slightly moistened with water or cleaner (not with

a volale liquid such as thinner or gasoline).

1.5. General Precautions

•Please follow the instrucons of the user manual, which helps properly installing

and operang this product and enjoying its advanced features. Please keep the

instrucons for future reference.

•Read all instrucons before using the product.

•Do not use the product if the supply cord is damaged. If it is the case, it must be

replaced by the manufacturer or its service agent.

•The pictures in this manual may be dierent from the real product, please refer

to the real product for reference.

•Before operaon, please conrm whether the power specicaons comply with

the one on the nameplate.

•Before cleaning or maintaining the air condioner, please turn o the air

condioner and pull out the power plug.

•Make sure the power cord has not been pressed by hard objects.

•Do not pull or drag the power cord to pull out the power plug or move the air

condioner.

• Do not insert or pull out the power plug with wet hands.

• Please use the grounded power. Make sure the grounding is reliable.

•If the supply cord is damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualied person in order to avoid a hazard.

•If abnormal condion occurs (e.g. burned smell), please disconnect the power

immediately and then contact the local dealer.

•When nobody is taking care of the unit, please turn it o and remove the power

plug or disconnect the power.

•Do not splash or pour water on the air condioner. Otherwise, it may cause short

circuit or damage the air condioner.

•If you use a drainage hose, the nearby temperature cannot be lower than 0°C.

Otherwise, it will cause water leakage to the air condioner.

•It is forbidden to operate any kind of heang equipment around the air condioner.

•Keep the appliance away from re sources, inammable and explosive objects.

•Children and disabled people are not allowed to use the air condioner without

supervision.

•Do not allow children to play or climb on the air condioner.

•Do not put or hang dripping objects on top of the air condioner.

•Do not repair or disassemble the air condioner by yourself.

•It is forbidden to insert any objects into the air condioner.

•The air condioner must be operated within the temperature range: 16°C~35°C.

• The appliance is for indoor use only.

5

•The appliance must be posioned so that the plug is accessible at all mes.

•This air condioner can only be used in a household environment, not for

commercial industry.

•The reserved space around the air condioner should be at least 12″ (30cm).

•Do not operate the air condioner on humid environments.

• Please keep the air inlet and the air outlet clean, and free from obstacles.

•During operaon, close the doors and windows to improve the cooling eect.

•Please put the air condioner on a smooth and at ground when operang to

avoid noise and vibraon.

•This air condioner is equipped with castors. Castors should slide on a smooth

and at ground.

•It is forbidden to lt or turn over the air condioner. If there is any abnormality,

please disconnect the power cord immediately and contact your dealer.

• Do not place this appliance in direct sunlight.

2. UTILIZATION AND FUNCTIONING

2.1. Product Description

Remote Control

FAN

AUTO

OPER

HEALTH

AIR

FILTER

TURBO

ON/OFF

X-FAN

HOUR

HUMIDITY

ON/OFF

MODE

FAN

X-FAN

TURBO

TEMP

TIMER

SLEEP LIGHT

30 cm

Display Board

Remote Control

Receiver

Air Outlet

Wheels

Heat Air

Exhaust Vent

Handle

Upper Air

Inlet Grill

Lower Air

Inlet Grill

Power Cord

6

EN

Local Air Conditioner | Aire Acondicionado | Ar Condicionado

Note:

The actual product may be dierent from the above images. Please refer to the actual

product.

Icons on Display Screen

2.2. Control Panel

2.2.1. Control Panel Operation

1. Power buon:

Press once to start and press once more to stop the unit.

2. Mode buon:

Press this buon to change the operaon mode as shown below:

COOL→ DRY → FAN→ COOL;

3. ˄˅ buon:

In Cool or Heat mode, if you press the buon once, the temperature will decrease

1˚C (33°F). If you press the buon once the temperature will increase 1˚C (33°F). The

temperature can be selected from 16˚C (61°F) ~ 30˚C (86°F).

4. Fan buon:

Press this buon to change the operaon fan in the following order:

LOW→MED→TURBO→AUTO

3. ˄˅

4. Fan

1. Power

5. Timer

6. Sleep

2. Mode

7

FAN OPER

AUTO

HEALTH

AIR

FILTER

TURBO

ON/OFF

X-FAN

HOUR

HUMIDITY

set time

TIMER ON/TIMER OFF

turbo mode

set temperature

X-fan

health mode

send signal

set fan speed

light

Temp. display type

:Set temp.

:Outdoor ambient temp.

:Indoor ambient temp.

Sleep mode

Clock

Heat mode

Fan mode

Dry mode

Cool mode

Auto mode

Operation mode

air mode

5. Timer buon:

Press the mer buon to enter the mer seng mode. Under this mode, press the

or buon to adjust the mer seng. Timer seng will increase or decrease 0.5 hour

by pressing the or buon within 10 hours, while the mer seng will increase

or decrease 1 hour by pressing the or buon for more than 10 hours. Aer mer

seng is nished, the unit will display the temperature if there is no operaon for 5

seconds. If the mer funcon is started up, the upper indicator will keep the display

status. Otherwise, it will not be displayed. Under mer mode, press mer buon

again to cancel mer mode.

6. Sleep buon:

Press the sleep buon to enter the sleep mode. If the control operates at cooling

mode, aer the sleep mode is started up, the preset temperature will increase by 2˚C

within 2 hours and then the unit will operates at this temperature all the me.

Meanwhile, if the control operates at heang mode, aer the sleep mode is started

up, the preset temperature will decrease 2˚C within 2 hours and then the unit will

operate at this temperature all the me.

The Sleep funcon is not available for the Fan mode, Dry mode and Auto mode.

If the Sleep funcon is started up, the upper indicator will keep displaying the status.

Otherwise, it will not be displayed.

2.3. Remote Control

1. On/O buon.

2. Mode buon.

3. + and – buons.

4. Fan buon.

5. Health buon.

6. X-Fan buon.

7. Temperature buon.

8. Timer buon.

9. Turbo buon.

10. Sleep buon.

11. Light buon.

8

FAN

AUTO

OPER

HEALTH

AIR

FILTER

TURBO

ON/OFF

X-FAN

HOUR

HUMIDITY

ON/OFF

MODE

FAN

X-FAN

TURBO

TEMP

TIMER

SLEEP LIGHT

2



1

1







3

4



1

EN

Local Air Conditioner | Aire Acondicionado | Ar Condicionado

2.3.1. Remote Control Operation

Note:

Aer turning on the power, the air condioner will give out a sound and the operaon

indicator is On (red indicator). Aer that, you can operate the air condioner using

the remote control.

•When the unit is On, each me you press the buon on the remote control, the

sending signal icon on the remote control display will blink once. If the air

condioner gives out a beep sound, it means the signal has been sent.

•When the unit is O, the display screen on the remote control displays the set

temperature. At the On status, the display screen on the remote control displays

the corresponding startup funcon’s icon.

1. On/O buon:

Press this buon to turn on or turn o the air condioner. Aer turning on the air

condioner, the operaon indicator on the indoor unit display is On (green indicator)

and the indoor unit will give out a sound.

Note:

The colour is dierent for dierent models.

2. Mode buon:

Press this buon to select your required operaon mode.

•When selecng auto mode, the air condioner will start auto operaon according

to the indoor ambient temperature. Seng the temperature cannot be adjusted

and will not be displayed as well. Pressing the Fan buon can adjust the fan speed.

•Aer selecng the Cool mode, the air condioner will operate under cool mode.

The Cool indicator on the indoor unit is On. Press + or - buon to adjust the

temperature seng. Press the Fan buon to adjust the fan speed.

•When selecng the Dry mode, the air condioner operates at low speed under

Dry mode. The Dry indicator on the indoor unit is On. Under Dry mode, the Fan

speed cannot be adjusted.

•When selecng the Fan mode, the air condioner will only blow fan, with no

cooling or heang as all indicators will be O. Press the Fan buon to adjust the

fan speed.

•When selecng Heang mode, the air condioner operates under Heat mode.

The Heat indicator on the indoor unit will be On. Press the + or - buon to

adjust the temperature seng. Press the Fan buon to adjust the fan speed.

Note:

•For prevenng cold air, aer starng up the heang mode, the indoor fan will

blow fan aer delaying 1~5 minutes (actual delay me depends on indoor

ambient temperature).

•The seng temperature range with the remote control: 16~30˚C;

• Fan speed: auto, low speed, medium speed and high speed.

AUTO COOL DRY FAN HEAT

9

3. + and - buon:

•Pressing + or - buon once increases or decreases the set temperature 1˚C.

Holding the + or - buon, 2 seconds later, the set temperature on the remote

control will change quickly. When releasing the buon aer seng is nished,

the temperature indicator on the indoor unit will change accordingly (the

temperature cannot be adjusted under Auto mode).

•When seng Timer On, Timer O or Clock, press the + or - buon to adjust the

me (refer to the Clock, Timer On and Timer O buons).

4. Fan buon:

Pressing this buon can set the fan speed in sequence: Auto (AUTO), Low Speed ( ),

Medium Speed ( ) and High Speed ( ).

Note:

•Under Auto speed, the air condioner will select a proper fan speed by default

automacally.

• The fan speed under dry mode is low speed.

10

EN

Local Air Conditioner | Aire Acondicionado | Ar Condicionado

5. Health buon:

HEALTH Funcon:

Aer pressing the Health buon, the remote control will switch circularly as below:

HEALTH→AIR→AIR HEALTH→no display

•When selecng Health with the remote controller, the Health funcon will be

started up.

•When selecng Air with the remote control, the Air funcon will be started up.

•When selecng Air Health, Air and the Health, the funcon will be started up.

•When there is no display on the remote control, the Air and Health funcon will

be turned o.

6. X-Fan buon:

Aer pressing this buon under Cool or Dry mode, the remote control displays the

X-Fan icon and the X-Fan funcon is started up. Press this buon again to cancel the

X-Fan funcon. The X-Fan icon will disappear.

Note:

•Aer starng up the X-Fan funcon, when turning o the unit, the indoor fan will

connue to operate for a while at low speed to dry the residual water inside the

indoor unit.

•When the unit operates under X-Fan mode, pressing the X-Fan buon can turn o

the X-Fan funcon. The indoor fan stops operaon immediately.

7. Temperature buon:

By pressing this buon, you can see the indoor set temperature, the indoor ambient

temperature or the outdoor ambient temperature on the indoor unit display. The

seng on remote control is selected circularly as shown below:

•When selecng or no display with the remote control, the temperature

indicator on the indoor unit displays the set temperature.

•When selecng with the remote control, the temperature indicator on the

indoor unit displays the indoor ambient temperature.

•When selecng with the remote control, the temperature indicator on the

indoor unit displays the outdoor ambient temperature.

Note:

•The outdoor temperature display is not available for some models. When the

indoor unit receives the signal, it displays the indoor set temperature.

•Only for the models whose indoor unit has dual-8 display.

No display

11

8. Timer buon:

•At On status, press this buon once to set the Timer O. The Hour icon and O

will blink. Press the + or - buon within 5 seconds to adjust the me of the Timer

On. Each me you press the + or - buon, the me will increase or decrease half

an hour. When holding the + or - buon, 2 seconds later, the me will change

quickly unl you reach your required me. Aer that, press the Timer buon to

conrm it. The Hour icon and O will not blink again. Cancelling the Timer O:

Press the Timer buon again under Timer O status.

•At O status, press this buon once to set the Timer On. Please refer to the Timer

O for detailed operaon.

•Cancelling the Timer On: Press the Timer buon again under Timer On status.

Note:

•Time seng range: 0.5-24 hours.

•The me interval between two operaons cannot exceed 5 seconds. Otherwise,

the remote control will exit the seng status automacally.

9. Turbo buon:

When pressing this buon under Cool or Heang mode, the air condioner will enter

the quick cooling or quick heang mode. The Turbo icon is displayed on the remote

control. Press this buon again to exit the turbo funcon and the Turbo icon will

disappear on the remote control.

10. Sleep buon:

Under Cool or Heat mode, press this buon to start up the sleep funcon. The

icon is displayed on the remote control. Press this buon again to cancel the sleep

funcon. The icon on the remote control will be displayed.

11. Light buon:

Press this buon to turn o the display light on the indoor unit. The icon on the

remote control disappears. Press this buon again to turn on the display light. The

icon is displayed.

Combinaon Buons

Child Lock Funcon: Press + and - simultaneously to turn on or turn o the child lock

funcon. When the child lock funcon is on, the icon is displayed on the remote

control. If you operate the remote control, the icon will ash three mes, while the

remote control will not send any signal.

Temperature Display Switchover Funcon: Under O status, press the - and Mode

buons simultaneously to switch temperature display between ˚C and ˚F.

2.3.2. Replacing the Batteries on the Remote Control

1. Press the back side of the remote control marked with , as shown in the picture

and then push out the cover of the baery compartment along the arrow direcon.

2. Replace two 7# (AAA 1.5V) dry baeries, and make sure the posion of the + and -

polaries are correct.

3. Reinstall the cover of the baery compartment.

Cover of baery compartment

Baeries

Reinstall

Remove

Signal Sender

12

EN

Local Air Conditioner | Aire Acondicionado | Ar Condicionado

Note:

•During operaon, point the remote control signal sender at the receiving window

on the indoor unit.

•The distance between the signal sender and the receiving window should be no

more than 8m, and there should be no obstacles between them.

•The signal may be easily interfered in a room where there is a uorescent lamp

or a wireless telephone. The remote control should be close to the indoor unit

during operaon.

•Replace new baeries of the same model as the old ones when replacement is

required.

•When you are not going to use the remote control for a long me, please take

out the baeries.

•If the display on the remote control is fuzzy or there is no display, please replace

the baeries.

2.4. Operation Guide

1. Aer pung through the power, press the On/O buon on the remote control to

turn on the air condioner.

2. Press the Mode buon to select your required mode: Auto, Cool, Dry, Fan or Heat.

3. Press the + or - buon to set your required temperature (the temperature cannot

be adjusted under Auto mode).

4. Press the Fan buon to set your required fan speed: Auto, Low, Medium and High

speed.

2.5. Installation

2.5.1. Tools Required for Installation

2.5.2. Preparation Before the Installation and Accessories

13

Oponal Accessories

Note:

Some models do not have the following accessories.

Check if the accessories are available before installaon.

2.5.3. Installation Site Instructions

Installing the unit in the following places may cause malfuncon. If it is unavoidable,

please consult the local authorized dealer. Avoid the following sites where:

•Strong heat sources, vapors, ammable gas or volale liquids are emied.

•High-frequency electro-magnec waves generated by radio equipment, welders

and medical equipment.

•Salt-laden air prevails (such as close to coastal areas).

•The air is contaminated with industrial vapors and oils.

•The air contains sulfuric gas such as in hot spring zones.

•Corrosion or poor air quality exists.

• There are with special circumstances.

Requirement of the Air Condioner:

1. The air inlet should be far away from obstacles and do not place any objects near

the air outlet. Otherwise, it will aect the radiaon of the heat-removal pipe.

2. Select a locaon where the noise and oulow of air emied by the outdoor unit will

not aect the neighborhood.

3. Please try your best to keep the appliance away from uorescent lamp.

2.5.4. Electrical Connection Requirements

1. You must follow the electric safety regulaons when installing the unit.

2. According to the local safety regulaons, use a qualied power supply circuit.

3. For the appliances with type Y aachments, the instrucons shall contain the

substance of the following. If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualied persons in order to avoid a

hazard.

4. Properly connect the live wire, neutral wire and grounding wire of the power socket.

5. Be sure to cut o the power supply before proceeding any work related to electricity

and safety.

6. Do not put through the power before nishing installaon.

7. The air condioner is a Class I electric appliance. It must be properly grounded

with a specialized grounding device by a professional. Please make sure it is always

grounded eecvely, otherwise it may cause electric shock.

8. The yellow-green wire or green wire in the air condioner is the grounding wire,

which cannot be used for other purposes.

9. The grounding resistance should comply with the naonal electric safety regulaons.

14

EN

Local Air Conditioner | Aire Acondicionado | Ar Condicionado

2.5.5. Installing the Unit

1. Install the rear clip:

Aim the rear clip (upper) at the rear clip (lower), x them together and press the clasp

forcibly in to the groove.

2. Install the hose at the rear clip:

Aim the opening of the hose at the round mouth of rear clip and rotate the hose

anclockwise into the rear clip.

3. Install the hose at the joint 1:

Aim the opening of hose at the round mouth of joint 1, rotate the hose anclockwise

into the joint.

4. Connect rear plate 1 and rear plate 2:

Fix the adjustable plate at the sliding groove of rear plate 1 and put the adjustable

plate into the rear plate to enable the adjustable plate slide inside the rear plate.

Then, connect the rear plate 2 and x the rear plate 1 and 2 with the screw. Adjust the

distance between rear plate 1 and rear plate 2 according to the required installaon

height.

5. The length of the rear plate 1 and rear plate 2 can be adjusted according to the

user’s requirement. Loosen the screws that x the rear plate 1, rear plate 2 and the

adjustable plate to move the rear plate 2 and the adjustable plate (you can slide freely

in the sliding groove of the rear plate 1 and rear plate 2) to the required length, and

then x the rear plate 1 and rear plate 2 with screws.

6. Do not put through the power before nishing installaon.

7. The air condioner is a Class I electric appliance. It must be properly grounded

with a specialized grounding device by a professional. Please make sure it is always

grounded eecvely, otherwise it may cause electric shock.

8. The yellow-green wire or green wire in the air condioner is the grounding wire,

which cannot be used for other purposes.

9. The grounding resistance should comply with the naonal electric safety regulaons.

2.5.5. Installing the Unit

1. Install the rear clip:

Aim the rear clip (upper) at the rear clip (lower), x them together and press the clasp

forcibly in to the groove.

2. Install the hose at the rear clip:

Aim the opening of the hose at the round mouth of rear clip and rotate the hose

anclockwise into the rear clip.

Clasp

15

3. Install the hose at the joint 1:

Aim the opening of hose at the round mouth of joint 1, rotate the hose anclockwise

into the joint.

4. Connect rear plate 1 and rear plate 2:

Fix the adjustable plate at the sliding groove of rear plate 1 and put the adjustable

plate into the rear plate to enable the adjustable plate slide inside the rear plate.

Then, connect the rear plate 2 and x the rear plate 1 and 2 with the screw. Adjust the

distance between rear plate 1 and rear plate 2 according to the required installaon

height.

5. The length of the rear plate 1 and rear plate 2 can be adjusted according to the

user’s requirement. Loosen the screws that x the rear plate 1, rear plate 2 and the

adjustable plate to move the rear plate 2 and the adjustable plate (you can slide freely

in the sliding groove of the rear plate 1 and rear plate 2) to the required length, and

then x the rear plate 1 and rear plate 2 with screws.

Hose Rear Clip

Joint 1 Hose

Sliding Groove

of Rear Plate

Screw

Ajustable

Plate

16

EN

Local Air Conditioner | Aire Acondicionado | Ar Condicionado

6. Install the protecve grill:

Aim the protecve grill at the air outlet of the rear plate 1 and then press the clasp of

the protecve grill inwards to fasten the rear plate 1.

7. Install the exhaust hose sub-assy at the rear plate:

Aim the rear clip of exhaust hose sub-assy at the air outlet of the rear plate 1 and then

press the clasp of rear clip into the groove of the protecve grill rmly.

8. Install the exhaust hose sub-assy at the rear plate:

Fix the joint 1 of the exhaust hose sub-assy at the air outlet of the back plate and the

groove at the two sides of the back plate air outlet, then insert joint 1 into the groove

downwards.

This length can be adjusted according

to the user’s requirement

Adjustable plate

(you can slide in

the sliding groove

of rear plate 1 and

rear plate 2)

Screw

Rear

Plate 2 Rear

Plate 1

Screw

Clasp of

Prostecve

Grill

Screw Screw

Rear Clip

Clasp of

Prostecve

17

9. Install the bae (air outlet):

When the unit is not to be used, press the clasp of protecve grill to make it separate

from the rear plate 1 and then pull the protecve grill outwards to remove it. The

bae (air outlet) is in the sliding groove of the rear plate 1. Move the bae (air outlet)

to block the air outlet.

10. Filter 2:

Hold the buckle of the lter 2 to pull it outwards.

Joint 1

Air Outlet groove of Back Plate

Screws

Bae (Air Outlet)

Clasp of the Protecve Grill

Buckle of

Filter 2 Filter 2

18

EN

Local Air Conditioner | Aire Acondicionado | Ar Condicionado

11. Install the wire hook:

Press the clasp at the upper side of the back plate, assemble the rst wire hook

downwards into the groove of the upper clasp; press the clasp at the lower side of

the back plate and assemble the second wire hook upwards into the groove of lower

clasp.

12. Install the remote controller box:

The opening of the remote controller box is upward. Aim the groove of the back side

at the groove of the le side plate and then assemble the remote control box.

Clasp

Wire Hook

Remote

Controle

Box

Groove

19

20

Drainage port Screw

Thecondensationwaterdrainageisdonethroughahoseconnectedtotheunit

whichmustbekeptinhorizontalpositionforanefficientdrainage.Thisunithasan

internaldepositnotremovable.

Therearetwooptionsfordrainage:

A. Continuousdrainageofinternalhole

Keepthehoseconnectedtoasewersystem/externaldepositforwater

drainage.Inthiscasethereisnoalertsincetheunitwilldrain

continuouslywithoutanystorageinside.(Thisoptionisnot

recommendablebecausetherewillbeadecreaseinenergeticefficiency).

NOTE: When using the option of continuous drainage, install the drainage hose

first as shown in the picture below, otherwise, the incorrect drainage will

affect the normal operation of the unit.

■

Drainage hose installation

1. Fixthedrainagepipeclipontherightofrearsideplateneardrainageportwith

ascrew.

Drainage pipe clip

2. Removetherubberplugatdrainageport.

3. Putthedrainagepipeintodrainageportandscrewitup,andthenbinditwithpipe

hoop.

4. Puttherubberplugintotheothersideofdrainagepipe,fixitwithpipehoop

andthenfixitinthedrainagepipeclip.

Drainage port

Pipe hoop

Rubber plug

Drainage pipe clip

Drainage pipe

Pipe hoop

Drainage port

2.5.5.1. Drainage Hose Installation

Page is loading ...

Becken AR COND PORTATIL BAC2511 Owner's manual

Becken AR COND PORTATIL BAC2511 Owner's manual

in other languages

Related papers

Other documents