POWERED BY
TECHNOLOGY
®
INSTALL TECHPRO VDS1000HD:
1 Launch the installer on the MAHLE USB Drive
2 Click “Install TechPRO VDS1000HD”
3 Agree to the “Software License Agreement” for TechPRO VDS1000HD to launch the setup wizard and follow the on-screen prompts
4 After the installation is complete in the TechPRO VDS1000HD Setup Wizard, click the “Finish” button to exit the Setup Wizard and the troubleshooting guide search will begin
Note: It’s possible to press the Cancel to interrupt the search process – if cancelled, the search can be resumed from the main application
INSTALL VDS1000HD ADAPTER DRIVERS:
1 Click on “Install VCI1000HD Adapter Drivers”
2 Once the installation process is complete, Press “OK” in the confirmation message
3 Close the TechPRO VDS1000HD Installation Bundle screen
SOFTWARE LICENSE REGISTRATION:
1 To obtain your license key, please call MAHLE Tech Support at 1-800-468-2321 (Option 1) and have your activation code card ready
2 Enter the License Key and click “Add”
3 Click “Register”
4 Enter Personal Information by clicking “Edit”
VDS1000HD
QUICK START GUIDE
P/N 035 82528 00
POWERED BY
TECHNOLOGY
®
1 Close running applications
2 If using the software USB drive, the installation program will begin automatically - click the “Install VCI1000HD drivers” button to begin or download the
latest drivers from www.mahletechpro.com
3 Plug the USB cable into the USB port on the PC, if you wish to use USB connectivity to the computer
4 Connect the other end of the USB cable to the part labelled “computer” on the VCI1000HD
5 Connect the diagnostic cable to the 26-pin connector on the VCI1000HD
6 Attach the diagnostic cable’s connector to the diagnostic port on the vehicle
6
5
4
NOTE: VCI1000HD is powered by
the vehicle and must be connected
to operate
Ensure that the USB cable is
firmly seated into the VCI1000HD
USB port
VCI1000HD
QUICK START GUIDE
/