INSTRUCTION MANUAL
Model 24145
Unicheck Digital Pressure
2347 Circuit Way, Brooksville, Florida, USA 34604
Phone: (+1) 352-799-1111 Toll Phone: (+1) 877-775-4AME (4263)
Fax: (+1) 352-799-1112 E-mail: sales@ameintl.net www.ameintl.net
Specifications:
1. Calibration Units: Bar, Kg/cm², kPa, and PSI
2. Measure Range: 2-150 PSI
3. Resolution: 0.1 PSI
4. Operating Temperature: 0°c ~ 50°c
5. Power Source: Lithium and Alkaline LR44
Instructions:
1. Place the gauge’s nozzle onto a tire valve firmly.
2. Press the button to turn on the power and back light.
3. Wait for 2 seconds or a buzzer sound and remove gauge
nozzle from a tire valve to see an accurate tire pressure from the
display.
4. On Button can be pushed for unit changing.
5. Unit can be changed either before or after checking a tire pressure
and will be automatically converted to a correct pressure on the
display.
6. Backlight automatically turns off after a measurement.
7. For every power on cycle, gauge can be lasted 20 seconds around
and then off.
8. Gauge can be manually powered on by once pushing button or
turn off by holding the button for 3 seconds.
9. Remove the battery lid for changing batteries.
10. Low battery icon alarm when voltage is under 2.5V.
-
1
