2. Kado
  3. 9507561

Kado 9507561, 9507560 Installation guide

  • Hello! I'm a chat assistant and I've reviewed the provided installation instructions for the Kado Era Exposed Shower & Bath Set with a Lever Handle. The document details important steps required for the product's installation, including pressure testing and ensuring correct plumbing fittings, also wall brackets allow for pipework to be approximately 40mm clear of the wall. I am here to answer your questions about the product and its installation process outlined in the document.
  • Who is required to install this product?
    What should be done with threaded joints?
    What testing is required before installation?
    What is the responsibility of the installer regarding plumbing?
Kado Era Exposed Shower & Bath Set
Lever Handle
IMPORTANT INFORMATION: please read before starting installation.
A Licensed Plumber must install this product.
1. It is the plumber's responsibility to ensure that all assembled components and threaded joints are checked for
correct assembly prior to installing.
2. All threaded joints are to be taped with suitable plumbers tape or sealed with a recommended sealing
compound.
3. Prior to installation, the tapware must be pressure tested using the appropriate testing equipment.
4. Prior to installation, the installer is responsible for ensuring installation of the correct plumbing fittings and the
set out distances are correct for the product supplied.
Wall brackets allow for
pipework to be approx.
40mm clear of wall.
Exposed T connections
attached to wall outlets.
Cover plates behind
exposed T connections.
Breech assembly,
150mm centres
Bib tap assembly
Plumbers, please ensure a copy of the Installation Instructions
are left with the end user for future reference
Installation Instructions
/