Wilson Electronics 301125 Installation guide

Wilson Electronics
Brand
Wilson Electronics
Model
301125
Category
Network antennas
Type
Installation guide

Wilson Electronics 301125

The Wilson Electronics 301125 Magnet-Mount Antenna is an essential tool for enhancing your cell signal in various scenarios. With its versatile design, it can be effortlessly connected directly to your phone using an adapter (sold separately). This allows you to enjoy improved signal strength and call quality even in remote areas or places with weak reception.

Moreover, the 301125 can be seamlessly integrated with Wilson Electronics Signal Boosters, providing an even more powerful solution for boosting your signal. By connecting the antenna cable to the Signal Booster, you can amplify the signal in your home, office, or vehicle. This is particularly beneficial in areas with limited or obstructed cell coverage.

Wilson Electronics 301125

The Wilson Electronics 301125 Magnet-Mount Antenna is an essential tool for enhancing your cell signal in various scenarios. With its versatile design, it can be effortlessly connected directly to your phone using an adapter (sold separately). This allows you to enjoy improved signal strength and call quality even in remote areas or places with weak reception.

Moreover, the 301125 can be seamlessly integrated with Wilson Electronics Signal Boosters, providing an even more powerful solution for boosting your signal. By connecting the antenna cable to the Signal Booster, you can amplify the signal in your home, office, or vehicle. This is particularly beneficial in areas with limited or obstructed cell coverage.

Magnet-Mount Antenna
Installation Instructions
1 2
1. Magnet-Mount Antenna
2. Mini Magnet-Mount Antenna
1. Connecting Directly to a Phone
Attach your antenna to your cell phone using an adapter specific to
your phone. The adapter (sold separately) connects the phone to the
antenna cable and transfers power to and from the antenna. Adapter
Guide at: www.WilsonElectronics.com
2. Connecting to a Wilson Electronics Signal Booster
The antenna cable attaches directly to the Signal Booster. Check
your Signal Booster installation guide for specific instructions.
3. Installing the Magnet-Mount Antenna
To receive the best cell signal, select a location in the center of the
vehicle’s roof 12 inches away from any other antennas and windows
and free of obstructions. The Outside Antenna must be installed
vertically. Signal performance will be degraded if the antenna is not
vertical. For a more professional looking installation, run the antenna
cable under the door seal. Carefully pull down the door seal. Run
the cable through the seal and push the seal back into place. This
prevents constant wear and tear on the cable as the door opens and
closes. Route the cable from the Outside Antenna and attach it to the
connector labeled “ANTENNA” on the Signal Booster.
Technical Support
For assistance with your installation contact Wilson Electronics Technical
Support toll free at 866-294-1660 Mon.- Fri. Hours: 7:00am to 6:00pm
MST, closed Saturday, Sunday & Holidays.
90 Day Warranty
The Wilson Electronics Magnet-Mount Antenna is warranted for 90
days against defects in workmanship and/or materials and will be
repaired or replaced, at the discretion of the manufacturer, to the
original purchaser with dated sales receipt. The antenna and a copy of
the receipt must be sent to the factory at purchaser’s expense where
it will be repaired or replaced and returned shipping paid. Warranty
does not cover damages caused by abuse, misuse, negligence,
improper installation, etc. These are considered to be avoidable
circumstances. All Wilson Electronics warranties are limited to the
specific Wilson Electronics product only and do not include phone,
vehicle or other external product.
866-294-1660
www.WilsonElectronics.com
[email protected]
Part# 103019_Rev12_06.26.12
Email: [email protected] or visit www.WilsonElectronics.com.
U.S. Patent No. – 6,788,261
  • Page 1 1
  • Page 2 2

Wilson Electronics 301125 Installation guide

Wilson Electronics
Brand
Wilson Electronics
Model
301125
Category
Network antennas
Type
Installation guide

Wilson Electronics 301125

The Wilson Electronics 301125 Magnet-Mount Antenna is an essential tool for enhancing your cell signal in various scenarios. With its versatile design, it can be effortlessly connected directly to your phone using an adapter (sold separately). This allows you to enjoy improved signal strength and call quality even in remote areas or places with weak reception.

Moreover, the 301125 can be seamlessly integrated with Wilson Electronics Signal Boosters, providing an even more powerful solution for boosting your signal. By connecting the antenna cable to the Signal Booster, you can amplify the signal in your home, office, or vehicle. This is particularly beneficial in areas with limited or obstructed cell coverage.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents