Eizo TP1 User manual

Eizo
Brand
Eizo
Model
TP1
Category
Holders
Type
User manual

Eizo TP1 is a touch panel pointer designed for use with EIZO color LCD monitors. It allows you to interact with the monitor's touch screen using a physical pointer, providing a more precise and intuitive experience than using your finger. The pointer can be used for a variety of tasks, such as drawing, annotating documents, and navigating menus. It is also ideal for use in educational and corporate settings, where multiple users may need to interact with the same monitor.

Eizo TP1 is a touch panel pointer designed for use with EIZO color LCD monitors. It allows you to interact with the monitor's touch screen using a physical pointer, providing a more precise and intuitive experience than using your finger. The pointer can be used for a variety of tasks, such as drawing, annotating documents, and navigating menus. It is also ideal for use in educational and corporate settings, where multiple users may need to interact with the same monitor.

User’s Manual
TP1 Pointer for Touch Panel Color LCD Monitor
Thank you very much for choosing an EIZO product.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.
Package Contents
____________________________________________________
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
Touch Panel Pointer Pointer Holder
Screw for pointer installation × 1
User’s Manual
How to install
________________________________________________________
A driver is required to install the touch panel pointer and pointer holder.
1． Touch Panel Pointer installation
Attach the wire lead of the pointer to the monitor by using the supplied screw.
NOTE
When the monitor has the stand-mounting holes on the rear, attach the TP1 into the lower hole.
When the monitor has the hole exclusively for TP1, attach the TP1 into it. (About the location of hole for TP1, refer to User’s
Manual of the monitor.)
2． Pointer Holder installation
(1) Remove the upper screw from the rear of the monitor.
(2) Insert the stopper of the holder into the ventilation slot of the monitor.
(3) Fix the holder on the monitor by using the screw removed at step (1).
(4) House the pointer into the holder.
Specifications
________________________________________________________
(1) (2) (3)
Dimensions Weight
Touch Panel Pointer
140 mm (L)× φ 10 mm (5.5” (L) × φ 0.39”)
50 g (1.76 oz)
Pointer Holder
24.1 mm (W) × 86.3 mm (H) × 28 mm (D) (0.95” (W) × 3.40” (H) × 1.10” (D))
10 g (0.35 oz)
■Dimensions
Unit: mm (inch)
● Touch Panel Pointer ● Pointer Holder
NOTE
TP1 is designed for pointing on the screen. The drawing touch and dragging it on the touch panel is not guaranteed.
EIZO NANAO CORPORATION
153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630, U.S.A.
〒924-8566 石川県白山市下柏野町153番地
http://www.eizo.com
Copyright© 2003-2007 EIZO NANAO CORPORATION All rights reserved.
This document is printed on recycled chlorine free paper.
4th
Edition-November, 2007 Printed in Japan.
05D22953D1
(U.M-FP01)
  • Page 1 1

Eizo TP1 User manual

Eizo
Brand
Eizo
Model
TP1
Category
Holders
Type
User manual

Eizo TP1 is a touch panel pointer designed for use with EIZO color LCD monitors. It allows you to interact with the monitor's touch screen using a physical pointer, providing a more precise and intuitive experience than using your finger. The pointer can be used for a variety of tasks, such as drawing, annotating documents, and navigating menus. It is also ideal for use in educational and corporate settings, where multiple users may need to interact with the same monitor.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers