Commell LS-373 User manual

LS-373

3.5” Miniboard

User’s Manual

Edition 1.3

2010/11/8

LS-373 User’s Manual

-2-

Copyright

reserved. The information in this document is subject to change without prior notice

to make improvements to the products.

This document contains proprietary information and protected by copyright. No part

of this document may be reproduced, copied, or translated in any form or any

means without prior written permission of the manufacturer.

All trademarks and/or registered trademarks contains in this document are property

of their respective owners.

Disclaimer

The company shall not be liable for any incidental or consequential damages

resulting from the performance or use of this product.

The company does not issue a warranty of any kind, express or implied, including

without limitation implied warranties of merchantability or fitness for a particular

purpose.

The company has the right to revise the manual or include changes in the

specifications of the product described within it at any time without notice and

without obligation to notify any person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at http://www.commell.com.tw

LS-373 User’s Manual

-3-

Packing List:

Please check the package content before you starting using the board.

Hardware:

LS-373 3.5“ Miniboard x 1

Cable Kit:

SATA Cable x 2

(

OALSAT

A

-L

)

COM Port Cable x 1

(

OALES-BKU1NB

)

USB Cable x 1

(OALUSBA-3)

DC Power Cable x 1

(

OALDC-2

)

Audio Port Cable x 1

(OALPJ-HDUNB)

PS/2 cable x 1 (keyboard & mouse)

(

OALPS2/MK

)

1 to 3 power output cable x 1

(OAL4P-2)

SATA power Cable x 1

(OAL4P-S2)

CPU Cooler x 1

(OHS-P-M-B)

Printed Matters:

Driver CD x 1 (Including User’s Manual)

LS-373 User’s Manual

-4-

Index

Chapter 1 <Introduction> .......................................................................7

1.1 <Product Overview>..................................................................7

1.2 <Product Specification>.............................................................8

1.3 <Mechanical Drawing >.............................................................9

1.4 <Block Diagram>..................................................................... 11

Chapter 2 <Hardware Setup>...............................................................12

2.1 <Connector Location>.............................................................12

2.2 <Jumper Location & Reference>.............................................14

2.3 <Connector Reference>..........................................................15

2.3.1 <Internal Connectors> .................................................15

2.3.2 <External Connectors>................................................15

2.4 <CPU and Memory Setup> .....................................................16

2.4.1 <CPU Setup>...............................................................16

2.4.2 <Memory Setup> .........................................................17

2.5 <CMOS Setup>.......................................................................18

2.6 <Serial ATA Interface>.............................................................19

2.7 <Ethernet Interface>................................................................20

2.8 <Onboard Display Interface>...................................................21

2.8.1 <Analog Display>.........................................................21

2.8.2 <Digital Display>..........................................................22

2.8.3 <HDTV Interface>........................................................26

2.9 <Integrated Audio Interface>...................................................27

2.10 <GPIO Interface> ..................................................................29

2.11 <Power Supply>.....................................................................30

2.11.1 <Power Input>............................................................30

2.11.2 <Power Output>.........................................................30

2.12 <Switch and Indicator>..........................................................31

Chapter 3 <System Setup> ..................................................................32

3.1 <Audio Configuration>.............................................................32

LS-373 User’s Manual

-5-

3.2 <Display Properties Setting> ...................................................33

Chapter 4 <BIOS Setup>......................................................................35

Appendix A <I/O Port Pin Assignment> .............................................37

A.1 <Serial ATA Port>.....................................................................37

A.2 <IrDA Port>..............................................................................37

A.3 <SMBUS Port>........................................................................38

A.4 <Serial Port 1>.........................................................................38

A.5 <Serial Port 2>.........................................................................39

A.6 <VGA Port>..............................................................................41

A.7 <LAN Port>..............................................................................41

A.8 <USB Interface>......................................................................41

Appendix B <Flash BIOS>...................................................................42

B.1 <Flash Tool>............................................................................42

B.2 <Flash BIOS Procedure> ........................................................42

Appendix C <System Resources>......................................................43

C.1 <Direct memory access (DMA)> .............................................43

C.2 <Input/output (IO)>..................................................................43

C.3 <Interrupt request (IRQ)>........................................................45

C.4 <Memory> ...............................................................................46

Appendix D <Programming GPIO’s>..................................................47

Appendix E <Programming Watchdog Timer>..................................48

Contact Information..............................................................................49

LS-373 User’s Manual

-6-

(This page is left for blank)

LS-373 User’s Manual

-

7-

Chapter 1 <Introduction>

1.1 <Product Overview>

LS-373, the new generation of the 3.5” Miniboard, supports Intel Penryn Processors

for 667/800/1066 MHz front side bus and features Intel GM45 and ICH9M chipset,

integrated GMA X4500 graphics, One DDR3 SO-DIMM memory, REALTEK High

Definition Audio, two Serial ATA and two Intel Gigabit LAN.

Intel Penryn Processor

The board supports Intel Penryn Processors with 667/800/1066 MHz front side bus,

L2 Cache: All specification depended on the CPU (1M/2M/3M/4M/6M), to provide

more powerful performance than before.

New features for Intel GM45 chipset

The board integrates Intel GM45 and ICH9M chipset, to provide new generation of

the mobile solution, supports Intel GMA X4500 graphics, One DDR3 SO-DIMM

800/1066 MHz memory, built-in high speed mass storage interface of serial ATA,

High Definition Audio with 2 channels surrounding sound.

All in One multimedia solution

Based on Intel GM45 and ICH9M chipset, the board provides high performance

onboard graphics, 24-bit dual channel LVDS interface, HDTV and 2 channels High

Definition Audio, to meet the very requirement of the multimedia application.

Flexible Extension Interface

The board provides one PCI Express Mini Card and one Mini PCI socket.

LS-373 User’s Manual

-

8-

1.2 <Product Specification>

General Specification

Form Factor 3.5” Miniboard

CPU Support Intel Core 2 Duo Processor

Package type: Micro-FCPGA478

Front side bus: 667/800/1066 MHz

L2 Cache: All specification depend on the CPU. (1M/2M/3M/4M/6M)

Memory One DDRIII 800/1066MHz up to 4GB

Non-ECC, unbuffered memory supported only

Chipset Intel GM45 & ICH9M (82801IBM)

Real Time Clock Chipset integrated RTC with onboard lithium battery

Watchdog Timer Generates a system reset with internal timer for 1min/s ~255min/s

Power Management ACPI 2.0 compliant, supports power saving mode

Serial ATA Interface 2 x serial ATAII interface with 300MB/s transfer rate

VGA Interface Intel integrated extreme GMA X4500 (Graphic Media Accelerator)

Technology

LVDS interface Onboard 24-bit dual channel LVDS connector with +3.3V/+5V/+12V

supply

Audio Interface Intel integrated ICH9M with Realtek ALC888 HD Audio

LAN Interface 2 x Intel 82574L Gigabit LAN

GPIO interface Onboard programmable 8-bit Digital I/O interface

Extended Interface 1 x PCI Express mini card, 1 x Mini PCI socket to support Mini PCI

Type III B

Internal I/O Port 1 x RS232/422/485, 1 x SMBUS, 1 x GPIO port, 1 x HDTV, 4 x USB

ports, 1 x IrDA, 2 x Serial ATA, 1x LVDS, 1x LCD inverter connector,

1 x Audio connector and 1 x CDIN connector

External I/O Port 1 x PS/2 Keyboard/Mouse Port, 2 x RJ45 LAN ports, 1 x DB15 VGA

port, 1 x RS232 port and 1 x SPDIF connector

Power Requirement 12V DC Input

Dimension 146mm x 101mm

Temperature Operating within 0~60 centigrade

Storage within –20~85 centigrade

Ordering Code

LS-373 Onboard VGA, LVDS, LAN, USB2.0, HD Audio, SATA, HDTV,

SMBUS, Mini PCI socket and PCI Express mini card

MPX-574D PCI Express mini card supports single Giga LAN

MPX-SDVOD SDVO to DVI module

ADP-L2T 18bit LVDS to TTL module

For further product information please visit the website at http://www.commell.com.tw

LS-373 User’s Manual

-

9-

1.3 <Mechanical Drawing >

TOP:

LS-373 User’s Manual

-

10-

Bot:

LS-373 User’s Manual

-

11-

1.4 <Block Diagram>

ICH9M

1 x Mini PCI socket

2 x Intel 82574L

1 x RS422/485/232

1 x COM & GPIO & IrDA

Intel Core 2 Duo Processor

1 x VGA Interface

Intel GMA X4500

1 x 204-pin DDR3

SO-DIMM

800/1066 MHz up to

4GB

W83627DHG

ALC888 HD

1 x LVDS & HDTV

2 x Serial ATA

GM45

1 x PCI Express mini card

SPDIF & 2 channel HD

Audio (Line out & Mic

in

)

& CDIN

Front side bus: 667/800/1066 MHz

SMBUS

1 x PS/2

25X80 SPI

4 x USB 2.0

LS-373 User’s Manual

-

12-

Chapter 2 <Hardware Setup>

2.1 <Connector Location>

JFRNT

SYSFAN

CN_INV

SATA2

CD_IN

CPUFAN

MINIPCI

CN_HDTV

CN_DIO

CN_USB2 CN_USB1

CN_COM2

CN_AUDIO

CN_SMBUS

CN_IR

SATA1

DC_OUT

MINI_CARD

DC_IN

CN_LVDS

LS-373 User’s Manual

-

13-

COM1 RJ45_1 RJ45_2 SPDIF PS2

CRT

SO-DIMM

1.24

’

LS-373 User’s Manual

-

14-

2.2 <Jumper Location & Reference>

Jumper Function

JRTC CMOS Operating/Clear Setting

JVLCD Panel Voltage Setting

JAT Power mode select

JCSEL1

JCSEL2

CN_COM2 RS-232 RS422 RS485 Setting / CN_IR IrDA Setting

Jumper: JAT

Type: onboard 3-pin header

Power Mode JAT

AT Mode 1-2

ATX Mode

2-3

Default setting: ATX Mode

1

3

JVLCD

JRTC

JAT

JCSEL2

JCSEL1

1

3

LS-373 User’s Manual

-

15-

2.3 <Connector Reference>

2.3.1 <Internal Connectors>

Connector Function Remark

CPU Socket 478 for socket-P CPU

SO-DIMM 204-pin DDR3 SO-DIMM socket

SATA1/2 7-pin Serial ATA connector

DC_IN DC 12V input connector

DC_OUT 4-pin power output connector

CN_AUDIO 5 x 2-pin audio connector

CD_IN 4-pin CD-ROM audio input connector

CN_DIO 6 x 2-pin digital I/O connector

CN_USB1/2 5 x 2-pin USB connector

CPUFAN 4-pin CPU cooler fan connector

SYSFAN 3-pin system cooler fan connector

CN_HDTV 5 x 2-pin HDTV interface

CN_LVDS 20 x 2-pin LVDS connector

CN_INV 5-pin LCD inverter connector

CN_IR 5-pin IrDA connector

JFRNT 14-pin front panel switch/indicator connector

MINIPCI 124-pin Mini PCI socket Type IIIA

MINI_CARD 52-pin PCI Express mini card

CN_COM2 9-pin RS422/485/232

JAT Power mode select

JCSEL1

JCSEL2

CN_COM2 RS-232 RS422 RS485 Setting /

CN_IR IrDA Setting

JRTC CMOS Operating/Clear Setting

2.3.2 <External Connectors>

Connector Function Remark

RJ45_1/2 Two RJ45 LAN Ports

SPDIF SPDIF digital audio output Port

PS2 PS/2 keyboard and mouse Port

CRT Analog DB15 VGA Port

COM1 DB9 RS232 COM Port

LS-373 User’s Manual

-

16-

2.4 <CPU and Memory Setup>

2.4.1 <CPU Setup>

The board comes with the socket 478 for Intel Core 2 Duo socket-P Processor

667/800/1066 MHz of front side bus and L2 Cache: All specification depend on the

CPU (1M/2M/3M/4M/6M). Please follow the instruction to install the CPU properly.

1. Use the flat-type

screw drive to unlock

the CPU socket

Unlock wa

y

Check

p

oint

2. Follow the pin direction to install

the processor on the socket

3. Lock the socket

4. Socket P has 478 pins, but is not

pin-compatible with Socket M

CPU.

Socket-M CPU

Check point

LS-373 User’s Manual

-

17-

2.4.2 <Memory Setup>

The board provides one 204-pin DDR3 SO-DIMM to support 800/1066MHz DDR3

SO-DIMM memory module up to 4GB.

SO-DIMM

LS-373 User’s Manual

-

18-

2.5 <CMOS Setup>

The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to

inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its

default values.

Jumper: JRTC

Type: Onboard 3-pin jumper

JRTC Mode

1-2 Clear CMOS

2-3 Normal Operation

Default setting: 2-3

JRTC

13

LS-373 User’s Manual

-

19-

2.6 <Serial ATA Interface>

Based on Intel ICH9M, the board provides two Serial ATAII interfaces with up to

300MB/s of transfer rate.

SATA 2/1

LS-373 User’s Manual

-

20-

2.7 <Ethernet Interface>

The board integrates with two Intel 82574L Gigabit Ethernet controllers. The Intel

Gigabit Ethernet supports triple speed of 10/100/1000Base-T, with IEEE802.3

compliance and Wake-On-LAN supported.

RJ45_2/1

Page is loading ...

Commell LS-373 User manual

Commell LS-373 User manual

Related papers

Other documents