Page is loading ...
L71
© 2006 American Standard Inc.
RELIANT+
SINGLE CONTROL LAVATORY FAUCET
EXTRA LONG METAL LEVER HANDLE
MODEL NUMBER:
2385.007 Lavatory Faucet
3/8" O.D. copper inlets. Metal pop-up drain.
2385.407 Lavatory Faucet
Metal pop-up drain. 1/2" male threaded connectors and nuts.
2385.008 Lavatory Faucet
Less drain. 3/8" O.D. copper inlets. Less pop-up hole.
2385.009 Lavatory Faucet
Grid drain. 3/8" O.D. copper inlets. Less pop-up hole. Vandal
Resistant 0.5 gpm Spray.
2385.010 Lavatory Faucet
Less pop-up drain. 3/8" O.D. copper inlets. With pop-up hole
and rod.
2385.011 Lavatory Faucet
Less drain. 3/8" O.D. copper inlets. Less pop-up hole.
Vandal Resistant 0.5 gpm Spray.
GENERAL DESCRIPTION:
All metal body with extra long Metal Lever Handle.
Washerless 47mm ceramic disc valve cartridge. Equipped
with a hot limit safety stop. Choice of 3/8" copper supplies or
3/8" O.D. copper with 1/2" male connectors and nuts. Metal
lever handle with large "comfort zone". Fitting mounts on 4"
centers. 2.2 gpm/8.3L/min. maximum flow rate.
2385.007 Shown.
PRODUCT FEATURES:
All Copper Waterway: Highest quality, faucet material for
durability & long life.
Ceramic Disc Valve Cartridge: Assures smooth, precise
valve control and a lifetime of drip-free, maintenance-free
performance.
Wide Comfort Zone: Gives more sensitive temperature
control.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
SUGGESTED SPECIFICATION
Single control lavatory fitting shall feature an all metal body with extra long metal lever handle. Shall also feature a washerless
ceramic disc valve cartridge. Fitting shall be equipped with a hot limit safety stop. Fitting shall be American Standard Model #
2385.___.___.
114mm
(4-1/2)
154mm
(6-1/16)
114mm
(4-1/2)
98mm
(3-7/8)
49mm
(1-15/16)
171mm
(6-3/4)
56mm
(2-3/16)
56mm
2-3/16
102mm
(4)
159mm
(6-1/4)
4˚
32mm
(1-1/4)DIA.
MOUNTING
HOLE
L72
© 2006 American Standard Inc.
RELIANT+
SINGLE CONTROL LAVATORY FAUCET
EXTRA LONG METAL LEVER HANDLE
Product
Number
Description
Lavatory Faucet. Extra Long Metal Lever Handle. Metal pop-up drain. 3/8" O.D. copper
inlet supplies with 1/2" male threaded connectors and nuts. 2.2gpm/8.3 L/min max. flow rate.
Finish
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
2385.007
2385.407
2385.008
2385.009
2385.010
2385.011
Polished
Chrome
002
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
Lavatory Faucet. Extra Long Metal Lever Handle. Less pop-up drain. 3/8" O.D. copper inlets.
Less pop-up hole. 2.2gpm/8.3 L/min max. flow rate.
Lavatory Faucet. Extra Long Metal Lever Handle. Grid drain. 3/8" O.D. copper inlets.
Less pop-up hole. Vandal Resistant 0.5 gpm/ 1.9 L/min Spray.
Lavatory Faucet. Extra Long Metal Lever Handle. Less pop-up drain. 3/8" O.D. copper inlets.
With pop-up hole and rod. 2.2gpm/8.3 L/min max. flow rate.
Lavatory Faucet. Extra Long Metal Lever Handle. Less drain. 3/8" O.D. copper inlets.
Less pop-up hole. Vandal Resistant 0.5 gpm/ 1.9 L/min Spray.
Lavatory Faucet. Extra Long Metal Lever Handle. Metal pop-up drain. 3/8" O.D. copper
inlets. 2.2gpm/8.3 L/min max. flow rate.
/
