Paragon 2190110 User guide

Type
User guide
A505
OWNER’S MANUAL
FOR PROFESSIONAL WARMERS/MERCHANDISERS
Model Numbers
SMALL WARMER LARGE WARMER
2150110 (120 volts) 2190110 (120 volts)
2250110 (230 volts) 2290110 (230 volts)
15” Warmer
2190210 (120 volts)
2290210 (230 volts)
Merchandisers/Warmers
www.ManufacturedFun.com
Paragon International, Inc 731 W. 18
th
Street P.O. Box 560 Nevada, IA 50201 USA
Phone (515) 382-8000 Toll-free (800) 433-0333 Fax (515) 382-8001 Email: info@manufacturedfun.com
2
SAFETY PRECAUTIONS
Paragon values your continued safety above all else. Please follow these guidelines when using your equipment to
prevent injury and maximize product performance:
No direct contact to equipment by the general public should be allowed when used in
food service locations. Only trained personnel should operate this equipment.
Carefully read any and all instructions before beginning operation of the equipment.
Always wear safety glasses when servicing equipment.
Heating elements reaches extreme heat during operation. To avoid injury, NEVER
touch elements while hot.
Any alterations made to equipment by anyone other than certified Paragon personnel
will void warranty and may also create unsafe working conditions. NEVER make
alterations to the equipment.
Machine must be properly grounded to prevent electrical shock.
Do NOT immerse warmer element or any other part of this equipment in water. Doing
so may damage equipment and prevent it from working properly.
Always unplug equipment before cleaning or servicing to prevent electric shock.
3
INTRODUCTION
PARAGON IS PROUD TO BE YOUR
PARTNER FOR MANUFACTURED FUN.
Our goal is to provide you with the best solutions to attract customers, expand your business, and improve
your profits. That’s why this product has been specially-crafted to meet precise specifications for
performance, efficiency, and output.
Your Paragon Warmer features:
Stainless steel warming deck has a heating element underneath to keep all of the product in the
cabinet not just the top warm and fresh for hours.
Easy to clean surfaces just wipe with a damp cloth.
Sturdy stainless steel and aluminum frame and tempered glass side panels.
Perfect for popcorn, nacho chips or peanuts graphics for all are included.
Should you have any questions about your equipment, or would like to know more about our other
innovative concession equipment and supplies, please contact us at 1-800-433-0333 or visit us on the
web at: Manufacturedfun.com
Thank you for your purchase and enjoy!
4
ELECTRICAL REQUIREMENTS
This product requires a properly-grounded 120 volt supply with a 15 amp circuit. The Paragon Warmers
have a current draw of .5 amps. (Export voltage is 230VAC.)
We recommend your Paragon Warmer be plugged directly into a dedicated outlet. Extension cords may
create a safety hazard and reduce its performance.
Be sure outlet accepts three (3) prong grounded plug. DO NOT use a three (3) prong to two (2) prong
adapter.
UNPACKING
Paragon carefully inspects each product during assembly and after completion to adhere to strict quality
guidelines, and packs it securely to ensure safe delivery to each of our customers. Be sure to carefully
remove all packing material and adhesive before any operation. Please examine your product to guarantee
all equipment has arrived, complete and in good condition.
If you believe that any damage may have occurred during shipment or parts may be missing, please
contact Paragon immediately for replacement.
5
OPERATING INSTRUCTIONS
1. Apply the appropriate decals (popcorn, nachos, or peanuts) to the front and rear glass
panels by peeling off the backing paper and applying to the glass.
2. Position the warmer on the counter top to provide the user accessibility to the dispensing
door.
3. Load the warmer with the correct product for the label designation through the top loading
door.
4. Turn on the lighted power switch. This will turn on the heating element in the base of the unit
and will keep your product warm and fresh.
5. Keep the power switch in the off position when the warmer is empty or not being used.
6. To remove product from the warmer, swing the dispensing door outward and use a scoop to
remove and package the product.
WARNING: Always turn the POWER switch to OFF when the machine is not in use.
WARMER CARE
It is recommended that the warmer be cleaned out daily using suitable cleaners that may be used on
food service equipment.
Always make sure the machine is off and unplugged before cleaning.
The dispensing door and the bottom tray are removable for easy cleaning and are
dishwasher safe due to the stainless steel construction.
The tempered glass panels can be cleaned with a vinegar and water solution. The use of
ammonia based cleaners is not recommended.
NEVER use water on the electrical components in the base.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Paragon 2190110 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI