Atlas Sound MVX-193 User manual

Atlas Sound
Brand
Atlas Sound
Model
MVX-193
Category
Loudspeakers
Type
User manual

Atlas Sound MVX-193 is a monitor panel designed to monitor 25V or 70.7V speaker lines, featuring a VU meter for precise level monitoring. It allows for easy connection of speaker lines with screw terminals and a rotary switch for selecting the monitored line. The meter's sensitivity can be field-adjusted, and the panel can be converted between 25V and 70.7V operation by cutting jumpers on the resistors.

Atlas Sound MVX-193 is a monitor panel designed to monitor 25V or 70.7V speaker lines, featuring a VU meter for precise level monitoring. It allows for easy connection of speaker lines with screw terminals and a rotary switch for selecting the monitored line. The meter's sensitivity can be field-adjusted, and the panel can be converted between 25V and 70.7V operation by cutting jumpers on the resistors.

Specifications are subject to change without notice
www.AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
©2001 ATLAS SOUND LP Printed in U.S.A. 00901 ATS000807 RevB 9/01 PN 116378
INSTALLATION INSTRUCTIONS
MVX-193, MVX-195
MONITOR PANELS
Atlas Sound Monitor Panels are designed to monitor 25 volt or 70.7 volt speaker lines.
The monitor panel as shipped from the factory is wired to monitor 25 volt speaker lines. It is converted
to 70.7 volt operation by cutting the white jumpers across resistors R2 & R5. Resistor R1 is located
on the PC Board attached to the VU meter. Resistor R5 is on the terminal strip located on the sub-
panel.
The VU meter is factory calibrated to read 0dB with a 25 volt peak sine wave input. By removing the jumper
across resistor R1, the meter will read 0dB with a 70 Volt peak input. The meter sensitivity can be field
adjusted by means of the pot (R4) on the VU meter PC Board.
The speaker lines to be monitored are connected to the screw terminals on the back of the panel.
Terminal numbers correspond to the like numbered switch positions. The terminals labeled "SPR" are
spare blank terminals.
Specifications are subject to change without notice
www.AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
©2001 ATLAS SOUND LP Printed in U.S.A. 00901 ATS000807 RevB 9/01 PN 116378
INSTALLATION INSTRUCTIONS
MVX-193, MVX-195
MONITOR PANELS
PARTS LIST
REFERENCE P/N DESCRIPTION
R1 110591 RESISTOR 33K, 1/2W 10%
R2 110671 RESISTOR 15K, 1/2W 10%
R3 110485 RESISTOR 4.7K, 1/2W 10%
R4 121274 TRIM POT 10K
R5 110663 RESISTOR 1K, 1/2W 10%
R6 142239 POT 50 OHM 3W 20%
M1 125521 VU METER (A SCALE)
100471 PC BOARD FOR VU METER. INCLUDES R1 THRU R4
S1 121541 ROTARY SWITCH, 2 POLE 6 POSITION
TS1, TS2 111678 SCREW TERM. STRIP, 6 POINT
120456 KNOB, BLACK W/ALUM. INLAY
The following parts are dependent on the model number of the monitor panel
SPEAKER (SPK1)
REFERENCE P/N DESCRIPTION
MVX-193 125512 3" 8 OHM
MVX-195 FC104 4" 8 OHM
TRANSFORMER (T1)
REFERENCE P/N DESCRIPTION
MVX-193 LT-25 5 WATT 25 VOLT TRANSFORMER
MVX-195 HT-82 8 WATT 25 VOLT TRANSFORMER
  • Page 1 1
  • Page 2 2

Atlas Sound MVX-193 User manual

Atlas Sound
Brand
Atlas Sound
Model
MVX-193
Category
Loudspeakers
Type
User manual

Atlas Sound MVX-193 is a monitor panel designed to monitor 25V or 70.7V speaker lines, featuring a VU meter for precise level monitoring. It allows for easy connection of speaker lines with screw terminals and a rotary switch for selecting the monitored line. The meter's sensitivity can be field-adjusted, and the panel can be converted between 25V and 70.7V operation by cutting jumpers on the resistors.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents