2. Intermec
  3. PB50
PB50

Intermec PB50 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Intermec PB50 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PB50
Belt Clip Instructions
The PB50 belt clip makes it easy for you to attach the PB50 printer to your
belt. The belt clip kit contains these parts:
•Belt clip accessory
• Two Phillips screws
• This instruction sheet
To install the belt clip
1 Attach the belt clip to the back of the PB50 with the two Phillips screws.
2 Attach the PB50 to your belt with the belt clip.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2008 Intermec Technologies
Corporation. All rights reserved.
PB50 Belt Clip Instructions
*943-125-003*
P/N 943-125-003
/