Product Guide
Panel Computer, Fan less
Atom E3845, 7" WVGA, 12-24VDC input
PT-D07WA-110 Series
Thank you for purchasing this product. The product you have purchased consists of the
following items.
Check, with the following list, that your package is complete.
If you find any item either missing or damaged, please contact the sales representative you
purchased the product from.
For appropriate usage, be certain to read the Reference Manual before using this product.
Visit our website for downloading free other software tools.
The following manuals come with this product. Visit our website and download them by
entering the model type in "Downloads". Read them before using the product.
Before using the product, be certain to read the following guide, manual, and driver soft-
ware. They can be downloaded from Contec website.
Name
Contents
How to get
Product Guide (This sheet)
This lists the product configuration and
describes the precautions.
Included in the pack-
age (Printed matter)
Reference Manual
This describes the hardware aspects
such as functions and settings.
Download (PDF)
IPC Precaution List
This describes the precautions when
using the product.
Included in the pack-
age (Printed matter)
MICROSOFT SOFTWARE
LICENSE TERMS
(Royalty consent contract)
This manual explains the conditions and
rights of customers who use Windows
software.
Included in the pack-
age (Printed matter) *1
Pre-installed type OS Manual
This describes OS basic information, the
setup procedure, and the recovery
procedure.
Download (PDF)
Download
https://www.contec.com/download/
1. About the Product
This product is the “All-in-One” type PC, which has a 7-inch size (WVGA 800×480) LCD
touch screen integrated.
With a built-in NFC card reader/writer, the PC can be used for a wide range of
applications such as a desktop reception terminal and an authentication terminal.
Embedded-type CPU has been adopted. The use of readily available parts ensures the prod-
uct to be applied easily. In addition, the use of Contec-customized BIOS allows support to
be provided at the BIOS level.
2. Product Configuration
This product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or
missing items, contact your retailer.
Product...1
AC adapter… 1
AC power cable
(100VAC, 3pin)…1
*1*2
Product Guide...1
IPC Precaution
List...1
Warranty
Certificate...1
Serial Number
Label...1
Royalty Consent
Contract...1
Recovery
Disk...1
*1 This AC power cable is for the voltage of the 100VAC or less. It might be necessary to get a
particular cable to match the power voltage or outlet shape that you are using.
*2 Do not use this AC power cable with any devices except for a supplied AC adapter.
3. Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent acci-
dents resulting in injury or death and the destruction of equipment and resources. Under-
stand the meanings of these labels to operate the equipment safely.
DANGER
Signal word used to indicate an imminently hazardous sit-
uation which, if not avoided, will result in death or serious
injury.
WARNING
Signal word used to indicate a potentially hazardous situ-
ation which, if not avoided, could result in death or seri-
ous injury.
CAUTION
Signal word used to indicate a potentially hazardous situ-
ation which, if not avoided, could result in minor or mod-
erate injury.
Handling Precautions
WARNING
Always check that the power supply is turned off before connecting or disconnecting
power cables.
Do not use the product in locations exposed to a flammable or corrosive gas. It may
cause explosion, fire, electrical shock, or malfunction.
Do not touch metal parts (edge connector) with your hands. Otherwise, the product may
malfunction, or cause failure.
When transporting the product, pack it in the same condition as delivered from the Con-
tec or in equal packing condition to avoid applying shock, vibration, or static electricity
directly to the product.
Do not modify the product.
Always turn off the power before inserting or removing the cables.
This product is not intended for use in aerospace, space, nuclear power, medical equip-
ment, or other applications that require a very high level of reliability. Do not use the
product in such applications.
If using this product in applications where safety is critical such as in railways, automotive,
or disaster prevention or security systems, please contact your retailer.
Do not attempt to replace the battery as inappropriate battery replacement poses a risk
of explosion.
For battery replacement, contact your retailer as it must be performed as a process of
repair.
When disposing of a used battery, follow the disposal procedures stipulated under the
relevant laws and municipal ordinances. For details on replacing the battery, refer to the
appendix.
This product is not suitable for use in locations where children are likely to be present.
CAUTION
Do not use or store this product in a location exposed to high or low temperature that
exceeds range of specification or susceptible to rapid temperature changes.
e.g. - Exposure to direct sun - In the vicinity of a heat source
Do not use this product in extremely humid or dusty locations. It is extremely dangerous
to use this product with its interior penetrated by water or any other fluid or conductive
dust. If this product must be used in such an environment, install it on a dust-proof
control panel, for example.
Avoid using or storing the product in locations subject to shock or vibration that exceeds
range of specification.
Do not use this product in the vicinity of devices that generate strong magnetic force or
noise. Such products will cause this product to malfunction.
Do not use or store this product in the presence of chemicals.
To clean this product, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to
prevent pealing or discoloration of the paint.
CONTEC does not provide any guarantee for the integrity of data on storage.
This product's case may become hot. To avoid being burned, do not touch that section
while this product is in operation or immediately after turning off the power. Avoid
installation in a location where people may come into contact with that section.
Always remove the power cable from the power outlet before connecting or
disconnecting a connector.
Do not touch metal parts or terminals with your hands when the product is in operation.
Otherwise, the product may malfunction, or cause failure.
To prevent corruption of files, shutdown the OS and always wait for five seconds or longer,
then turn off the power of this product.
CONTEC reserves the right to refuse to service a product modified by the user.
In the event of failure or abnormality (foul smells or excessive heat generation), unplug
the power cord immediately and contact your retailer.
Use the power cable that matches the power supply voltage and outlet plug that you are
using.
Always turn off the power before replacing storage. It is not hot-swappable. Removing
the storage during the operation may results in system damages.
CONTEC does not guarantee for a 24-hour continuous operation of the product or
continuous current application to the product.
Do not use any sharp-pointed object such as a mechanical pencil to touch the touch
panel. Doing so may scratch the touch panel, resulting in malfunctions.
LCD may have a few bright spots that are always on or a few black spots that are always
off. Color irregularity may also occur depending on the viewing angle. This however is
due to the structural characteristics of the LCD; therefore, it is not a product fault.
Burn-in on TFT Display
"Burn-in" may occur if the same display is retained for a long time. Avoid this by
periodically switching the display so that the same display is not maintained for a long
time.
* Burn-In : Phenomenon characterized by a TFT display as a result of long-time display
of the same screen where a shadow-like trace persists because electric charge remains
in the LCD element even after the patterns are changed.
This product's specifications allow the device to be rebooted from the BIOS screen during
startup. This has no effect on operation after the OS boots.
This product may not operate properly in some cases due to factors such as the installa-
tion environment of the device or the product, and the communication load of the net-
work system. Please check beforehand to make sure that the device is suitable for your
environment. For installation of the product, please ask a system integrator or other spe-
cialists familiar with the wireless LAN network system construction.
When replacing other type of wireless LAN device with this product, it may be necessary
to reconfigure the network system due to differences in specifications or functions of the
product. Before using this product, it is recommended that a full validation be conducted
with a rental device of the CONTEC's in actual operating environment.
Metal objects within 30 mm around the antenna will affect the antenna characteristics.
Do not place any metal items near the antenna if possible.
Component Life
M.2 SSD --- The assumed life is about 3,000 times. For details on the life estimation, refer
to Reference Manual Appendix.
Battery --- The internal calendar clock and CMOS RAM are backed by a Lithium primary
battery. The backup time at a temperature of 25°C with the power disconnected is 7 years.
Backlight --- Backlight life is 50,000 hours.
(Ambient temperature 25°C±5°C, decreased to 50% of initial brightness)
AC adapter --- The life expectancy of the AC adapter is 9,000 hours at the maximum load
for an ambient temperature of 25°C.
* Replacement of expendables is handled as a repair (there will be a charge).
* The service life for consumable parts are reference values and are not guaranteed
values.
* If the AC adapter fails, CONTEC will replace it with an equivalent product (a charge may
be applied to the replacement). Also, note that we cannot provide analyses of failure
causes.
About listed transfer rate
Data transfer speed listed in this guide or Utility is a theoretical maximum value and does
not indicate the actual data speed.
Usage limitation
This product has not been developed or manufactured to be used in systems including the
equipment which is directly related to human lives *1 or the equipment which involves
human safety and may significantly affect the maintenance of public functions *2. Therefore,
do not use the product for such purposes.
*1 Medical devices such as life-support equipment and devices used in an operating the-
ater.
*2 Main control systems at nuclear power stations, safety maintenance systems at nuclear
facilities, other important safety-related systems, operation control systems within
group transport systems, air-traffic control systems, etc.
If using the IEEE802.11a standard, ensure that you comply with all relevant laws in the coun-
try of use.
CONTEC CO., LTD.
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
http://www.contec.com/
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
NA07948 (LYZD762) 04162021_rev2 [01142021] April 2021 Edition
4. Specifications
Function Specifications
Item
Description
CPU
Intel
®
Atom
®
E3845 Processor (1.91GHz)
BIOS
BIOS (mfd. by AMI)
Memory
4GB (On board, with ECC),
PC3-10600(DDR3L, 1333)
Graphics Controller
Intel
®
HD Graphics (CPU integrated)
LCD type
LCD type
7.0-inch TFT color LCD, WVGA (800 x 480)
Backlight
LED method, The ON/OFF can be controlled by software.
Touch
screen
Resolution
WVGA (800 x 480)
Detection
method
Resistive-film analog type
Connection
Internal serial port
Audio
HD Audio compliant, LINE OUT x 1
3.5φ stereo minijack, Full-scale output level 1.1Vrms (Typ.)
Internal monaural speaker x 1
LAN
Intel I210IT controller
1000BASE-T/100BASE-TX/10BASE-T
RJ-45 connector x 1 (supports Wake On LAN)
USB
Type-A connector
USB2.0 x 2 ports
Storage
1 slot, M.2 2242, SATAII
M.2 card compliant, 32GB (MLC) mounted *1
SD
SD Card slot x1(Internal USB connection), SD2.0 support
NFC reader/writer *2
Built-in SONY® RC-S632/U1 built-in
Compatible cards : ISO/IEC14443 Type A/B, FeliCa®, MIFARE
and so on
Security (TPM)
TCG TPM2.0
Hardware monitoring
Monitoring CPU temperature, board temperature, and power
voltage
Watchdog timer (WDT)
Software programmable, 255 level (1sec - 255sec),
Time up allows reset.
RTC/CMOS
Lithium backup battery life: 7 years or more
The real-time clock is accurate within ±3 minutes (at 25°C) per
month (CPU built-in RTC).
Power Management
Power management setup via BIOS
Supports ACPI Power management
Rated input voltage
12 - 24VDC
Range of input voltage
10.8 - 31.2V
Power consumption (Max.)
12V 1.9A
24V 1.0A
External device power supply
capacity
USB2.0 I/F : +5V : 0.5A x 2
SD card slot : +3.3V : 0.2A
Physical dimensions (mm)
264(W) x 133(H) x 33(D) (Not protrusions, stand)
Weight
Panel : 1.3kg approx.
Stand : 0.6kg approx.
*1 It is already built in the product. The capacity that can be recognized from OS might be dis-
played fewer than an actual value.
*2 The NFC port software (driver software), which is necessary for using the NFC reader/writer, is
not included in the package of this product. SDK is additionally required to use NFC. For more
details, please visit Sony Corporation website.
Environment Requirements
Item
Description
Operating ambient
temperature
0 - +35°C
Non-operating ambient
temperature
-10 - +50°C
Operating ambient humidity
10 - 90%RH (No condensation)
Floating dust particles
Not to be excessive
Corrosive gases
None
Line-noise
resistance
Line noise
AC line / ±2kV, Signal line / ±1kV
(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static
electricity
resistance
Contact discharge : ±4kV
(IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Atmospheric discharge : ±8kV
(IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration
resistance
Sweep
resistance
10 - 57Hz/semi-amplitude vibration 0.075mm, 57 - 150Hz
/1.0G,
40minutes each in X, Y, and Z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
Shock resistance
10G half-sine shock for 11ms in X, Y, and Z directions
(JIS C 60068-2-27 –compliant, IEC 60068-2-27 -compliant)
Grounding
Class D grounding, SG-FG / continuity
Standard
VCCI Class A, FCC Class A, RoHS Compliant
5. Physical dimensions
Main Unit
With the Stand (Horizontal installation)
With the Stand (Vertical installation)
-
1
-
2
Contec PT-D07WA-110 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec SPF10SQ1700 NEW Owner's manual
-
-
-
-
-
-
-
-
-