2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. BENDIX
  7. TCH-001-051

BENDIX TCH-001-051 User manual

  • Hello! I am an AI chatbot trained to assist you with the BENDIX TCH-001-051 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Technical Bulletin
Bulletin No: TCH-001-051 Effective Date: 3/27/03 Cancels: N/A Page: 1 of 1
Subject: BA-921 COMPRESSOR UNLOADER CAP REPLACEMENT KIT
Bendix Commercial Vehicle Systems has determined
that for some* BA-921 air compressors, under
certain conditions, air pressure can collect above the
unloader piston. This prevents the compressor from
return to the unloaded mode, causing it to constantly
build air. Bendix has determined that this condition
is not safety related.
To guard against this occurring, Bendix has
developed a replacement unloader cap designed to
prevent air being retained above the unloader piston.
Bendix recommends that all BA-921 air compressors
listed at the bottom of this page have the replacement
unloader cap kit installed.
Detroit Diesel Corp. and Caterpillar Inc. will be
conducting a service campaign where authorized
DDC and CAT service centers will offer unloader
cap replacement kits. The kits, Bendix part number
5012771, contain an unloader cap, unloader gasket
and spray shield (see Figure 1) along with installation
instructions. Replacement should take less than 20
minutes to complete.
Where a spray shield is already installed, the unloader cap upgrade has already been made, and no action is
needed. Only the BA-921 compressors listed below are part of this service campaign.
For any other technical questions, contact your local DDC or CAT Service Center; Call Bendix at 1-800-AIR
BRAKE (1-800-247-2725, option 2); or write to Bendix Commercial Vehicle Systems LLC, 901 Cleveland
Street, Elyria, OH 44035, Attention: TechTeam.
*Engines and compressor part numbers included in this service campaign:
© 2003 Bendix Commercial Vehicle Systems LLC 3/2003. All rights reserved. Printed in U.S.A.
Figure 1:
BA-921 Unloader
Cap
Replacement -
Expanded View
Unloader
Cap
Spray Shield
Unloader
Gasket
BA-921
Cylinder
Head
Engine Engine BA-921 Part Numbers
Manufacturer Type Bendix OE
DDC Series 60 5010821 DDC 23531315
CAT C9 5010803 CAT 191-6521
CAT C15.5, C18 5011427 CAT 223-3637
CAT C11, C13 5011441 CAT 223-3636
/