Transition Networks SFBRM1040-140 Datasheet

Transition Networks
Brand
Transition Networks
Model
SFBRM1040-140
Category
Network media converters
Type
Datasheet

Transition Networks SFBRM1040-140 is a Redundant OAM/IP-Based Remotely Managed NID (Network Interface Device) certified by MEF 9 & MEF 14 Carrier Ethernet. It has several capabilities and potential applications that would be of help to you. For example, it supports two remote management modes, IP-Based Remote Management and In-Band OAM 802.3ah. This means that you can manage the device remotely either through an IP-based network or through a dedicated OAM channel. Additionally, it supports SNMP v1, which allows you to monitor and manage the device using SNMP-based network management systems.

Transition Networks SFBRM1040-140 is a Redundant OAM/IP-Based Remotely Managed NID (Network Interface Device) certified by MEF 9 & MEF 14 Carrier Ethernet. It has several capabilities and potential applications that would be of help to you. For example, it supports two remote management modes, IP-Based Remote Management and In-Band OAM 802.3ah. This means that you can manage the device remotely either through an IP-based network or through a dedicated OAM channel. Additionally, it supports SNMP v1, which allows you to monitor and manage the device using SNMP-based network management systems.

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
[email protected]
http://www.transition.com
©2009 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
FAR END FAULT
LOOP BACK ALLOCATION
BANDWIDTH
UPGRADE
REMOTE FIRMWARE
Remotely Managed 10/100 NID IP
or OAM Management
Specifications
Standards IEEE Std. 802.3™, IEEE Std. 802.3ah, IEEE Std. 802.1P,
IEEE Std. 802.1Q, IEEE Std. 802.1X
Data Rate Copper: 10/100
Fiber: 100 Mbps
Filtering Addresses 8K MAC Addresses
Max Frame Size 1628 bytes
Dimensions Width: 3.4" [86 mm]
Depth: 5.0" [127 mm]
Height: 1.0" [25 mm]
Power Consumption 4.8 watts
Environment 0 – 50°C; 5% – 95% humidity non-condensing; 0 –
10,000 ft. altitude
Shipping Weight 2 lbs. [0.90 kg]
Regulatory Compliance EN55024, FCC Class A, CE Mark, UL
Warranty Lifetime
Ordering Info
SFBRM1040-140
10/100BASE-TX (RJ-45) [100 m]
to (2) 100BASE-X SFP Slots (empty)
Note: unit features USB port for local man-
agement application.
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS
Piggy Back Power Supply
SPS-1872-SA
Stand-Alone Power Supply
Mounting Options:
E-MCR-05
12-slot Media Converter Rack
RMS19-SA4-01
4-slot Media Converter Shelf
WMBD
DIN Rail Bracket 5.0" [127 mm]
WMBL
Wall Mount Bracket 4.0" [102 mm]
USB Cables:
USBC-AM-BM-03
USB 2.0 Cable A male to B male
[3ft. Gray]
USBC-AM-BM-06
USB 2.0 Cable A male to B male
[6ft. Gray]
SFBRM1040-140
stand-alone network interface device
OAM/IP-Based Remotely Managed
10/100BASE-TX to (2) 100BASE-X
Redundant OAM/IP-Based Remotely Managed NID
(Network Interface Device)
Features
MEF 9 & MEF 14 Carrier Ethernet Certification
Two remote management modes:
• IP-Based Remote Management
• In-Band OAM 802.3ah
(remote device managed by local peer)
SNMP v1
AutoCross™
Auto-Negotiation
Pause
Transparent Link Pass Through
Far-End-Fault
Remote Loopback
IEEE 802.1p QoS packet classification with
4 egress queues
Ipv4 IP TOS and DiffServ QoS classification,
IPv6 Traffic class
IEEE 802.1q VLAN, 4096 entries
Static MAC, 64 entries
Double VLAN tagging (C-tag/S-tag)(Q-in-Q)
IEEE 802.1x Port based security
RADIUS client
RMON counters for each port
Bandwidth allocation per port
DMI Optical Management
USB port for basic setup
Cable diagnostic function for TP ports
8K MAC addresses
Remote Firmware Upgrade
Applications:
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
AUTO CROSS
AUTO NEG
PAUSE
LINK PASS THRU
TRANSPARENT
RA
AN
ARE
EN
NS
NT
FAR END FAULT
LOOP BACK
ALLOCATION
BANDWIDTH
UPGRADE
REMOTE FIRMWARE
  • Page 1 1

Transition Networks SFBRM1040-140 Datasheet

Transition Networks
Brand
Transition Networks
Model
SFBRM1040-140
Category
Network media converters
Type
Datasheet

Transition Networks SFBRM1040-140 is a Redundant OAM/IP-Based Remotely Managed NID (Network Interface Device) certified by MEF 9 & MEF 14 Carrier Ethernet. It has several capabilities and potential applications that would be of help to you. For example, it supports two remote management modes, IP-Based Remote Management and In-Band OAM 802.3ah. This means that you can manage the device remotely either through an IP-based network or through a dedicated OAM channel. Additionally, it supports SNMP v1, which allows you to monitor and manage the device using SNMP-based network management systems.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents