ACCO Brands T300 User manual

Brand: ACCO Brands

Model: T300

Category: Laminators

Type: User manual

ACCO Brands T300 is a thermal binder, designed to help you achieve professional-looking results with your binding projects. It features a 600W heater, allowing you to bind documents quickly and efficiently. The T300 is also equipped with a document support bar, spring, and lever arm, making it easy to align and insert your documents. Additionally, the T300 has a variety of buttons, including on, off, program select, and bind, giving you precise control over the binding process.

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 1

T300

THERMAL BINDER

220-240V

ILLUSTRATED PARTS LISTS

AND

SERVICE INSTRUCTIONS

Compiledby IssueNo2

Approved by (Technical Manager) Date

REXEL BUSINESS MACHINES, DROITWICH, WORCESTERSHIRE, WR9 9AP, ENGLAND

TELEPHONE +44 (0) 1905 771555 FAX +44 (0) 1905 823374

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 2

TABLE OF CONTENTS

ILLUSTRATED PARTS MANUAL

T300 THERMAL BINDER

220-240V

Contents Page2

Preface Page 3

Illustrated parts list - Mouldings Pages 4 – 5

Mechanism and Electrics Pages 6 – 8

Service Instructions - To serial No A545817 Pages 9 – 14

Section 1.0 Replacement of Top Cover Page 9

Section 2.0 Replace lid moulding Page 10

Section 2.1 Replacement of Heater Assembly Page 10

Section 2.2 Replacement of Fixing Blocks Page 11

Section 2.3 Replacement of Insulation Page 11

Section 2.4 Replacement of base moulding Page 11

Section 3.0 Replacement of PCB Page 12

Section 4.0 Replacement of document support bar/

Spring/Lever arm Page 12

Section 4.1 Replacement of buttons Page 12

Section 4.2 Replacement of Thermistor Page 13

Section 5.0 Wiring Diagram 220/240

To Serial No A545817 Page 14

Service Instructions - From Serial No A545818

Section 6.0 Replacement of Top Cover Page 15

Section 7.0 Replace lid moulding Page 16

Section 7.1 Replacement of Heater Assembly Page 16

Section 7.2 Replacement of Fixing Blocks Page 17

Section 7.3 Replacement of Insulation Page 17

Section 7.4 Replacement of base moulding Page 17

Section 8.0 Replacement of PCB Page 17

Section 9.0 Replacement of document support bar/

Spring/Lever arm Page 18

Section 9.1 Replacement of buttons Page 18

Section 10.0 Wiring Diagram 220/240

From Serial No A545818 Page 19

Section 11 Specifications Page 20

Amendment Record Sheet Page 21

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 3

PREFACE

SERVICE PREPARATION

This manual provides the instructions for the replacement of all the components that may become worn or

damaged. Details of replacement parts and ordering information are given in associated illustrated parts list.

Illustrated Parts Lists For each machine give full details of the replacement part numbers with

supporting diagrams to show the location of the components.

Service Instructions For each machine give the recommended servicing procedure with supporting

pictorial diagrams for added clarity.

WARNING

1. Check the machine RATING PLATE DETAILS are compatible with the electrical mains supply.

2. Disconnect the electrical mains supply before removing any covers.

3. Upto serial number A545817, all machines must have a sound electrical earth connection.

From serial number A545818 all machines are double insulated and do not require an earth

connection.

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 4

MOULDINGS

No Description Part Qty Comment

1 Service Call Decal D000185 1 Not shown

2 Bottom Moulding D52501 1

3 On Button – Grey D52507 1

4 Off Button – Red D52508 1

5 Programme Select Button – Yellow D52509 1

6 Bind Button – Green D52510 1

7 Lid Pad Print D52516 1

8 Top Cover Pad Print D52517 1

9 No 4 x ½” Pan Plasfast Screw SCR716 6

10 Self Adhesive Rubber Feet SL18-294 4

11 Document Feet D52519 1

12 Spring Arm D52512 1 Not shown

13 Coil Spring D52518 1 Not shown

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 5

MOULDINGS

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 6

MECHANISM & ELECTRICS

Description Part Qty Comments

1 Heater Assembly 230V 600W A52505 1 To Serial No A545817

Heater Assembly 230V 600W A52527 1 From Serial No A545818

2 Heater Extrusion D52503 1 To Serial No A545817

Heater Extrusion From Serial No A545818 Inc in

A52527

3 Heater Fixing Block D52504 2

6 Compression Spring (clip) D52511 3 To Serial No A545817

7 Thermal Fuse Holder (Clip) D52513

Thermal Fuse Holder (Clip) 4 From Serial No A545818 Inc in

A52527

8 Base Insulation D52514 1

9 Nut Brass M3 Full NM32 2 To Serial No A545817

10 M3 Plain Brass Washer PLN34 1 To Serial No A545817

11 M3 x 12mm C’sunk slot head

brass

SCM145 1 To Serial No A545817

12 M3 x 8 Pozi Pan Rec’d

Plasform

SCR713 12

13 M3 Plain Brass Washer SHK12 1 To Serial No A545817

14 T300 Thermal Binder PCB

230V

SL17-262 To Serial No A545817

T300 Thermal Binder PCB

230V

SL17-299 1 From Serial No A545818

15 Laminator Cordset UK SL4-102 1 To Serial No A545817

Laminator Cordset (Euro) SL4-103 1 To Serial No A545817

Laminator Cordset (Aust) SL4-104 1 To Serial No A545817

Laminator Cordset (Export) SL4-106 1 To Serial No A545817

Laminator Cordset (UK) SL4-199 1 From Serial No A545818

Laminator Cordset (Euro) SL4-120 1 From Serial No A545818

Laminator Cordset (SA) SL4-120 1 From Serial No A545818 fitted

with SL12-43 plug

16 Thermistor Assembly SL17-268 1 To Serial No A545817

Thermistor Assembly 1 From Serial No A545818 inc in

A52527

17 Crimp Terminal Housings SL13-66 2

18 No 4 x ¼” Self Tapper SCR541 1 To serial No A545817

19 M3 Fibre Washer FIB 1 4

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 7

MECHANSIM & ELECTRICS

To Serial No A545817

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 8

MECHANSIM & ELECTRICS

From Serial No A545818

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 9

SERVICE INSTRUCTIONS

This manual provides instructions for the replacement of components that may become worn or damaged.

WARNING

Check rating plate details are compatible with electric supply. Disconnect mains supply before removing

cover.

SECTION 1.0 (To serial no A545817)

Replacement of Top Cover

1. Ensure that mains cable is disconnected from the supply.

2. Remove the two rubber feet that are on the left hand and right hand side, towards the front of the

machine.

3. Remove the six fixing screws using a pozi drive screwdriver.

4. Lift base of machine away from top cover and place on a nearby flat surface.

5. The top cover should now remain face down.

6. Remove the four screws securing the PCB.

7. Remove the PCB, by unclipping the three crimp housings on the thermistor, mains connection and

the heater.

8. Remove the four buttons.

9. Ensure document support bar is in down position on top cover.

10. Remove the spring that fixes the document support bar to the lever arm, by unhooking it from the

screw boss, on the rear right hand side of the machine and place on one side.

11. Unhook the lever arm by pulling the lever upwards, towards, the inside of the cover; slide it over the

end of the bar and place on one side.

12. Turn the top cover over, so that the document support bar is facing you.

13. Lift the document support bar upwards and squeeze the extended legs on the bar together.

14. Release bar and remove from top cover.

15. Replace top cover.

16. To reassemble machine reverse order of operations 1 – 12.

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 10

SECTION 2.0 (To serial no A545817)

Replace Lid Moulding

1. Remove lid from top cover, by bowing inwards to release hinge pins.

2. Replace lid.

3. Check that pivot pins are correctly aligned in top cover.

4. Check lid opens and closes correctly.

SECTION 2.1

a. Replacement of Heater Assembly

1. Carry out procedures 1 to 4 in section 1.0.

2. The heater assembly is secured to 2 off heater fixing blocks by four fixing screws.

3. Remove the four fixing screws.

4. Unclip heater wire and thermistor connectors from PCB assembly.

5. Lift and remove heater assembly complete.

6. To reassemble machine, reverse sequence of operation 1 to 5.

b. Replacement of Heater Assembly (Including Thermistor)

1. Carry out procedures 1 to 4 in section 1.0.

2. The heater assembly is secured to 2 off heater fixing blocks by four fixing screws.

3. Remove the four fixing screws.

4. Unclip heater wire thermistor and mains connector from PCB assembly.

5. Lift and remove heater assembly complete.

6. To reassemble machine, reverse sequence of operation 1 to 5.

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 11

SECTION 2.2

Replacement of Fixing Blocks

1. Carry out procedures 1 to 4 section 2.1

2. Turn base moulding upside down.

3. Remove service decal and rating plate.

4. Unscrew four fixing screws

5. Blocks can now be replaced

6. Reassemble machine in reverse sequence of operations 1 to 4.

SECTION 2.3

Replacement of insulation

1. Carry out procedures 1 to 4 section 2.1

2. Insulation is secured using double sided sticky tape.

3. Ease free sticky tape from insulation.

4. Remove and replace insulation.

5. Reassemble machine in reverse sequence of operations 1 to 3.

SECTION 2.4

Replacement of Base Moulding

1. Carry out procedures 1 to 5 section 2.1

2. The extrusion/heater assembly will now become free.

3. Place on one side.

4. Remove insulation as procedures 2 to 4 section 2.3

5. Replace base moulding.

6. Reassemble machine in reverse sequence of operations 1 to 4.

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 12

SECTION 3.0

Replacement of PCB

1. Carry out procedures 1 to 7 section 1.

2. Replace the PCB

3. Reassemble machine In reverse sequence.

SECTION 4.0

Replacement of document support bar/spring/lever arm

1. Carry out procedures 1 to 4 section 1.

2. To remove extension spring unhook from rear screw boss and lever arm.

3. Replace spring.

4. To remove lever arm carry out procedures 1 to 4 section 1, and then 9 to 11 section 1.

5. To remove document support bar, carry out procedures 1 to 5 section 1.0 and procedures 9 to 14 in

section 1.0.

6. Replace document support bar.

7. Reassemble machine by reversing above operations.

SECTION 4.1

Replacement of Buttons

1. Carry out procedures 1 to 8 section 1.0.

2. Replace the buttons, making sure that the grey button is in the aperture marked 1, the red button is In

the aperture marked 0, the yellow button is in the aperture marked ? and the green button in the

aperture marked

3. Reverse procedure 1 to reassemble machine.

SECTION 4.2

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 13

Replacement of Thermistor

1. Carry out procedures 1 to 4 section 2.1

2. Remove thermistor for connection on PCB.

3. The PCB may be removed to ease replacement. If required refer to section 1 produce 6.

4. Replace thermistor

5. Reverse assembly of operations 3 to 1 if PCB was removed, otherwise 2 to 1.

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 14

Section 5.0

WIRING DIAGRAM 220/240V WD317 TO SERIAL NO A545817

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 15

SERVICE INSTRUCTIONS

This manual provides instructions for the replacement of components that may become worn or damaged.

WARNING

Check rating plate details are compatible with electric supply. Disconnect mains supply before removing

cover.

SECTION 6.0 (From serial no A545818)

Replacement of Top Cover

17. Ensure that mains cable is disconnected from the supply.

18. Remove the two rubber feet that are on the left hand and right hand side, towards the front of the

machine.

19. Remove the six fixing screws using a pozi drive screwdriver.

20. Lift base of machine away from top cover and place on a nearby flat surface.

21. The top cover should now remain face down.

22. Remove the four screws securing the PCB.

23. Remove the PCB, by unclipping the three crimp housings on the thermistor, mains connection and

the heater.

24. Remove the four buttons.

25. Ensure document support bar is in down position on top cover.

26. Remove the spring that fixes the document support bar to the lever arm, by unhooking it from the

screw boss, on the rear right hand side of the machine and place on one side.

27. Unhook the lever arm by pulling the lever upwards, towards, the inside of the cover; slide it over the

end of the bar and place on one side.

28. Turn the top cover over, so that the document support bar is facing you.

29. Lift the document support bar upwards and squeeze the extended legs on the bar together.

30. Release bar and remove from top cover.

31. Replace top cover.

32. To reassemble machine reverse order of operations 1 – 12.

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 16

SECTION 7.0 (From serial no A545818)

Replace Lid Moulding

5. Remove lid from top cover, by bowing inwards to release hinge pins.

6. Replace lid.

7. Check that pivot pins are correctly aligned in top cover.

8. Check lid opens and closes correctly.

SECTION 7.1

a. Replacement of Heater Assembly (including Thermistor)

1. Carry out procedures 1 to 4 in section 6.0.

2. The heater assembly is secured to 2 off heater fixing blocks by four fixing screws.

3. Remove the four fixing screws.

4. Unclip heater wire/thermistor and mains connectors from PCB assembly.

5. Lift and remove heater assembly complete.

6. To reassemble machine, reverse sequence of operation 1 to 5.

SECTION 7.2

Replacement of Fixing Blocks

7. Carry out procedures 1 to 4 section 7.1

8. Turn base moulding upside down.

9. Remove service decal and rating plate.

10. Unscrew four fixing screws

11. Blocks can now be replaced

12. Reassemble machine in reverse sequence of operations 1 to 4.

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 17

SECTION 7.3

Replacement of insulation

6. Carry out procedures 1 to 4 section 7.1

7. Insulation is secured using double sided sticky tape.

8. Ease free sticky tape from insulation.

9. Remove and replace insulation.

10. Reassemble machine in reverse sequence of operations 1 to 3.

SECTION 7.4

Replacement of Base Moulding

7. Carry out procedures 1 to 5 section 7.1

8. The extrusion/heater assembly will now become free.

9. Place on one side.

10. Remove insulation as procedures 2 to 4 section 7.3

11. Replace base moulding.

12. Reassemble machine in reverse sequence of operations 1 to 4.

SECTION 8.0

Replacement of PCB

4. Carry out procedures 1 to 7 section 6.

5. Replace the PCB

6. Reassemble machine In reverse sequence.

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 18

SECTION 9.0

Replacement of document support bar/spring/lever arm

8. Carry out procedures 1 to 4 section 6.

9. To remove extension spring unhook from rear screw boss and lever arm.

10. Replace spring.

11. To remove lever arm carry out procedures 1 to 4 section 6, and then 9 to 11 section 6.

12. To remove document support bar, carry out procedures 1 to 5 section 6.0 and procedures 9 to 14 in

section 6.0.

13. Replace document support bar.

14. Reassemble machine by reversing above operations.

SECTION 9.1

Replacement of Buttons

4. Carry out procedures 1 to 8 section 6.0.

5. Replace the buttons, making sure that the grey button is in the aperture marked 1, the red button is In

the aperture marked 0, the yellow button is in the aperture marked ? and the green button in the

aperture marked

6. Reverse procedure 1 to reassemble machine.

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 19

WIRING DIAGRAM 220/240V WD404 (From Serial No A545818)

Issue No 1

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 20

SECTION 11.0

SPECIFICATION SHEET

T300

POWER SUPPLY 220/240V 50Hz

HEIGHT 95 mm

WIDTH 370 mm

DEPTH 220 mm

WEIGHT 2 Kgs

MACHINE POWER 600W

DOCUMENT SIZE MAX A4

Issue No 1

Page is loading ...

ACCO Brands T300 User manual

Brand: ACCO Brands

Model: T300

Category: Laminators

Type: User manual

Download PDF

report

ACCO Brands T300 User manual

ACCO Brands T300 User manual

Other documents