Speedi-Products EX-AF 696 Operating instructions

Type
Operating instructions

This manual is also suitable for

Flexible Duct Installation
Recommended Uses
Flexible duct is designed for low to medium operating pressures in HVAC systems.
Designed for use as a non-insulated supply or return air duct venting systems.
WARNING: Foil duct not for use to vent appliances for cooking, heating, and clothes drying
unless recommended by the dryer manufacture and meets UL certification for said use.
WARNING: Vinyl hose not approved for dryer installations.
Directions For Use
Make sure there is enough clearance in order to install hoses and duct without kinking.
Bend clearance is the diameter of the hose times 2; i.e. 3” hose has a 6” bend clearance
requirement, a 4” hose has an 8” bend clearance requirement.
NOTE: Use a close elbow if needed to make a sharp turn (sold separately).
Secure with hose clamps on each end (sold separately).
  • Page 1 1

Speedi-Products EX-AF 696 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI