MPG PC7555C Operating instructions

PC7555A/B/C/D

Christmas Topiary

Assembly Instruction

Note: Current packaging is the way Topiary

should be stored when not in use

Instructions

Step 1 Twist the bottom locking cap counter-clockwise to remove finial from topiary body

Step 2 Pull the bottom locking cap from its place very carefully, removing attached finial

Step 3 Twist the bottom locking cap counter-clockwise to detach finial from bottom locking cap

Step 4 Detach the bottom locking cap from the finial

Step 5 Return bottom locking cap back to its original position

Step 6 Turn bottom locking cap clockwise until it locks in place

Step 7 Insert the bottom of the finial into the thread in the top of the base as pictured

Step 8 Turn finial clockwise until it locks in place

Add Counterbalance (Optional)

Step 1 Remove the bottom lock from its place

Step 2 Pour in a fair amount of pebbles or sand

Step 3 Put bottom locking cap back in place and twist to lock in place

Apply Felt Pads if Using With an Urn or Container

This manual is also suitable for